EAN: 765368391121
The M600 M-Class Power Amplifier from Bogen is an amplifier that produces 600W stereo and 1200W mono output power. This powerful amp allows installation of up to 2 input modules. These modules can be used for a variety of professional installations and can accept inputs from microphones, telephone systems, stereo sources, mono sources, daisy-chained amplifiers for sound reinforcement applications, and more. A single standard input module with screw-terminal inputs is supplied.
The M600 relies on a massive power toroidal transformer. These amplifiers are built for solid performance with low distortion and a high slew rate. Output module circuitry is located away from input module circuitry, minimizing noise and ground loops. The amplifiers require little maintenance and cleaning, as internal electronic components are located outside of the forced air-stream flow. Front-mounted fan filters provide easy removal and cleaning.
The M-Class amplifier is enclosed in a 2 rack space, heavy-duty, 14-gauge chassis. Three modes of operation are available including 70V mono, dual mono, and stereo. This full featured amp is packaged in only 2 rack spaces and can be stacked with other components above or below without requiring extra ventilation space. The M600 M-Class Power Amplifier includes two grilles with filters, a control knob cover, four rubber feet with screws, two rack ears, and the aforementioned pre-installed balanced input module.
3 selectable low-frequency roll-off choices: Flat /65 Hz /125 Hz
2x1 mixer function when in mono modes
Post- and pre-EQ output feeds (in mono modes)
DC, overload, short circuit, and thermal protection circuits
Back-Slope AC voltage stabilization provides dependable performance even with varying AC line voltages
Bogen M600 Specs
| Number of Channels | 1 |
| Power Rating | 70 V: 1200 W Bridged 4 Ohms: 600 W per Channel 8 Ohms: 400 W per Channel |
| Load Impedance / Voltage | 4 Ohms 70 V |
Performance
| Frequency Response | 20 Hz to 20 kHz ±0.25 dB |
| Input Sensitivity | 1.161 V (at 4 Ohms) |
| SNR | 109 dB (at 8 Ohms) |
| THD | < 0.02% |
Signal Processing
| Filters | High-Pass |
Connectivity
| Analog Audio I/O | 2 x Proprietary Input 1 x Screw Terminal Balanced Input Barrier Strip 5-Pin Output RCA Output |
Power
| AC Input Power | 95 to 130 VAC, 60 Hz |
| Current Consumption | 20 A |
Physical
| Display & Indicators | LED (Clip/Limit/Signal/Status) |
| Cooling | Fan (Variable Speed) |
| Dimensions | 17.0 x 3.5 x 18.5" / 43.2 x 8.9 x 47.0 cm |
| Weight | 46 lb / 20.9 kg |
Packaging Info
| Package Weight | 54 lb |
| Box Dimensions (LxWxH) | 24 x 24 x 9.5" |
In the Box
- Bogen M600 M-Class Power Amplifier
- 2 x Grilles with Filters
- Balanced, High-Impedance Stereo Input Module (Pre-Installed)
- Control Knob Cover
- 4 x Rubber Feet and Screws
- 2 x Rack Ears
- 3-Year Manufacturer Warranty
No posts found
