Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Crown Audio DriveCore Install 2|2400N 2400W 2-Channel Network Amplifier with BLU Link
EAN: 691991009624
The Crown Audio DriveCore Install 2|2400N is a 2400W, 2-channel, BLU Link network amplifier with advanced features and flexibility that s required by system integrators for challenging 21st century installed sound applications.
The 2/2400N can produce up to 2400W of output per channel at 2, 4, 8 or 16 ohms or 70 or 100 volts rms. It is compatible with Harman s BLU Link digital audio transport and accepts digital inputs via its rear-panel RJ-45 connectors. This digital control allows for networked monitoring, recallable presets, and the setup of secondary inputs that engage if the primary inputs fail. The 2|2400N also has built-in DSP capabilities including limiting, input/output EQs, delay, and a matrix mixer.
Its two channels can be bridged for powering higher power applications such as a subwoofer. The 2|2400N also has channel-independent high- or low-impedance output that is selectable from the rear-panel DIP switches. This allows you to integrate the amplifier into a variety of different setups. Each of its 2 channels additionally features independent attenuators, ranging from 0 to -80 dB.
The front panel of the 2|2400N provides a series of system indicators, including level and signal, ready, clip, thermal, and fault alerts for quick visual monitoring of the system. The unit can be integrated into a control system for powering on and off as well as engaging its sleep mode for saving energy when not in use. The 2|2400N is rack-mountable and requires 2 RU of space. A 20A IEC power cord is included.
Network Monitoring& Control
Monitoring, control, and audio manipulation are provided with the HiQnet protocol that s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.
Programmable General Purpose Input/Output Ports
GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.
DSP
DSP includes LevelMAX limiters, input/output EQ, delay, matrix mixer, and speaker line monitoring.
Direct Drive Constant Voltage
You can use smaller-gauge wiring to drive the speakers using either 70 or 100Vrms. With no need for a step-up transformer at the output, the DCi produces audio more efficiently.
Channel-Independent Hi-Z/Low-Z Selection
Drive either one or two speakers in low-Z mode, or literally hundreds of speakers in hi-Z mode (70 or 100 Vrms). This means design flexibility since DCi powers all loads on a channel-by-channel basis.
Bridgeable Channel Pairs
The DriveCore Install Series channels are bridgeable, even in 100Vrms mode, allowing them to be used to for higher-power applications like subwoofers.
Remote On/Off Interface
The 2|2400N can be integrated into a control system for remote on/off control.
Efficient Cooling Design
Efficient internal cooling fans provide airflow to the most heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling while minimizing wasted energy and noise.
Auto Standby
The 2|2400N automatically goes into sleep mode after 30 minutes of no input signal
TLC Protection
The amp has built-in protection from excessive heat by applying gain reduction when necessary
Advanced Protection Circuits
Amplifier and loads are protected against shorted outputs, DC, mismatchedloads, overheating, overvoltage or undervoltage, and high-frequency overload
EAN: 691991009624
The Crown Audio DriveCore Install 2|2400N is a 2400W, 2-channel, BLU Link network amplifier with advanced features and flexibility that s required by system integrators for challenging 21st century installed sound applications.
The 2/2400N can produce up to 2400W of output per channel at 2, 4, 8 or 16 ohms or 70 or 100 volts rms. It is compatible with Harman s BLU Link digital audio transport and accepts digital inputs via its rear-panel RJ-45 connectors. This digital control allows for networked monitoring, recallable presets, and the setup of secondary inputs that engage if the primary inputs fail. The 2|2400N also has built-in DSP capabilities including limiting, input/output EQs, delay, and a matrix mixer.
Its two channels can be bridged for powering higher power applications such as a subwoofer. The 2|2400N also has channel-independent high- or low-impedance output that is selectable from the rear-panel DIP switches. This allows you to integrate the amplifier into a variety of different setups. Each of its 2 channels additionally features independent attenuators, ranging from 0 to -80 dB.
The front panel of the 2|2400N provides a series of system indicators, including level and signal, ready, clip, thermal, and fault alerts for quick visual monitoring of the system. The unit can be integrated into a control system for powering on and off as well as engaging its sleep mode for saving energy when not in use. The 2|2400N is rack-mountable and requires 2 RU of space. A 20A IEC power cord is included.
Network Monitoring& Control
Monitoring, control, and audio manipulation are provided with the HiQnet protocol that s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.
Programmable General Purpose Input/Output Ports
GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.
DSP
DSP includes LevelMAX limiters, input/output EQ, delay, matrix mixer, and speaker line monitoring.
Direct Drive Constant Voltage
You can use smaller-gauge wiring to drive the speakers using either 70 or 100Vrms. With no need for a step-up transformer at the output, the DCi produces audio more efficiently.
Channel-Independent Hi-Z/Low-Z Selection
Drive either one or two speakers in low-Z mode, or literally hundreds of speakers in hi-Z mode (70 or 100 Vrms). This means design flexibility since DCi powers all loads on a channel-by-channel basis.
Bridgeable Channel Pairs
The DriveCore Install Series channels are bridgeable, even in 100Vrms mode, allowing them to be used to for higher-power applications like subwoofers.
Remote On/Off Interface
The 2|2400N can be integrated into a control system for remote on/off control.
Efficient Cooling Design
Efficient internal cooling fans provide airflow to the most heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling while minimizing wasted energy and noise.
Auto Standby
The 2|2400N automatically goes into sleep mode after 30 minutes of no input signal
TLC Protection
The amp has built-in protection from excessive heat by applying gain reduction when necessary
Advanced Protection Circuits
Amplifier and loads are protected against shorted outputs, DC, mismatchedloads, overheating, overvoltage or undervoltage, and high-frequency overload
Crown Audio DCI2X2400N-U-USFX Specs
| Number of Channels | 2 |
| Power Rating | 2 Ohms: 2100 W per Channel 4 Ohms: 2400 W per Channel 4200 W Bridged 8 Ohms: 1900 W per Channel 4800 W Bridged 16 Ohms: 950 W per Channel 3800 W Bridged 70 V / 140 V: 2100 W per Channel 4200 W Bridged 100 V / 200 V: 2300 W per Channel 4600 W Bridged |
| Load Impedance / Voltage | Parallel/Stereo: 2 / 4 / 8 / 16 Ohms 70 / 100 V Bridged/Mono: 4 / 8 / 16 Ohms 140 / 200 V |
Performance
| Frequency Response | 20 Hz to 20 kHz ±0.25 dB (8 Ohms) |
| Damping Factor | > 5000 |
| Input Sensitivity | 2.5 Vrms (at 8 Ohms) 1.4 Vrms (at 70 V) 2 Vrms (at 100 V) |
| Input Impedance | 10 Kilohms (Balanced) 5 Kilohms (Unbalanced) |
| Max Gain | 34 dB |
| Max Input Level | +20 dBu |
| SNR | > 104 dB (at 8 Ohms) > 108 dB (at 8 Ohms) |
| THD | < 0.35% (Full Range, at Rated Power) |
| Intermodulation Distortion | 0.35% |
| Crosstalk | > 80 dB (Below Rated Power, 20 Hz to 1 kHz) |
| CMRR | > 70 dB |
Signal Processing
| DSP | Yes |
| Crossover | Yes |
| Ducking/Muting | None |
| Limiting | Yes |
Connectivity
| Analog Audio I/O | 1 x Block 6-Pin Balanced Input 1 x Barrier Strip 4-Pin Output 1 x Block 8-Pin GPIO |
| Digital I/O | 1 x RJ45 Ethernet (Control, Network) 2 x RJ45 BLU-Link (I/O) |
| USB | None |
Power
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
| AC Power Connector | 1 x IEC 20 A / NEMA 5-20 |
| Current Consumption | 120 VAC: 4.5 to 10.7 A (1/8 Power) 9.2 to 23.6 A (1/3 Power) 230 VAC: 2.8 to 6.4 A (1/8 Power) 5 to 12.2 A (1/3 Power) |
| Power Consumption | 120 VAC: 239 to 523 W (1/8 Power) 286 to 881 (1/3 Power) 230 VAC: 260 to 545 W (1/8 Power) 331 to 979 (1/3 Power) |
Physical
| Display & Indicators | 15 x LED (Bridged Mode/Clip/Fault/Signal/Status/Thermal) |
| Rackmount Size | 2 RU |
| Cooling | Fan (Variable Speed) |
| Dimensions | 19.0 x 3.5 x 19.0" / 48.3 x 8.9 x 48.3 cm |
| Weight | 24 lb / 10.9 kg |
In the Box
- Crown Audio DriveCore Install 2|2400N 2400W 2-Channel Network Amplifier with BLU Link
- 6-Year Warranty
No posts found
