The Aviom D-800-Dante A-Net Distributor with A-Net Bridge Input is a 2RU rackmountable device designed to deliver power and audio to up to eight Aviom personal mixers such as the A-16II, A-16R, and A360. This version features a rear panel mounted Dante interface card that supports up to 64 channels of Dante network audio. This allows the unit to connect to a Dante-enabled console such as the Yamaha CL series console with Rio I/O racks.
The unit features one Pro16e A-Net in that supports an A-Net Bridge input from up to four synchronous Pro16 A-Net streams. It also features Network Mix Back functionality for streamlining the connections to IEM wireless transmitters as well as Ethernet port for iOS device control (iPad, iPhone, iPod Touch) using an attached Wi-Fi router. The back panel includes one Pro16e A-Net Output for thru connections to additional units. All of the audio connections utilize heavy-duty locking connectors to ensure reliability.
Dante Interface
Supports up to 64 channels of Dante network audio to a Dante enabled digital console such as the Yamaha CL with Rio I/O racks
64 Digital Channels
Using SB4 System Bridge and Pro 16 A-Net console cards, combines up to four synchronous Pro16 A-Net streams to send 64 channels of digital audio from digital console to A360 personal mixers with individually selected control on each mixer
A360 and A-16II Support
Supports switchable bi-directional data flow to A360 mixers and unidirectional data flow to A-16II Personal mixers
Streamlined Network Mix Back
Takes the stereo mix output from each connected A360 to create a 16-channel A-Net digital stream. These stereo mixes can then be connected to the musician's wireless in-ear monitor transmitters
Ethernet for iOS Devices
Connects to a standard Wi-Fi router to extend user interface of A360 to iOS device touchscreen
Aviom D800 Dante Specs
| Network Interface | Dante Primary I/O: Locking RJ 45 connector Dante Secondary I/O: Locking RJ45 connector Controls: 4x DIP switch blocks to set up 32 channel pairs as stereo link Indicator LEDS Error (red) Sync (green) 1GB active (red) Network activity (green) |
| A-Net Input/Output | 8x locking RJ45 powered connectors 2-position switch (I/II) for A-16II (I) and the bidirectional A360 personal mixer (II) A-Net In or A-Net Bridge In: Accepts Pro16 or Pro16e A-Net; 1x locking RJ45 connector A-Net In or A-Net Bridge In: Accepts Pro 16 or Pro 16e A-Net; 1x unpowered locking RJ45 connector |
| CAT Cables Supported | Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits. Unshielded Cat-5e cable may be used on all rear panel connections |
| Ethernet | 1x RJ45 Connector |
| LEDs | Power on (red) Sync (green) |
| USB | Type A port for firmware updates |
| A-Net Bridge | Pro16 A-Net Support: Transmits 16 channels of digital audio to A-16II and A-16R Pro16e A-Net Support: Transmits 64 channels of digital audio to A360 |
| Output Voltage | 24 VDC, 0.5 A transmitted over the Cat-5e cable |
| Power Supply | Internal, universal switching type, IEC connector |
| Input Voltage | 100 to 240 VAC, at 50 to 50 Hz, 300W |
| Fuse | 250 VC ~ T4AL |
| Dimensions | 19.0 x 14.3 x 3.5 (483.0 x 362.0 x 88.9 mm) |
| Weight | 12.0 lb (5.4 kg) |
Packaging Info
| Package Weight | 20 lb |
In the Box
- Aviom D-800-Dante A-Net Distributor with A-Net Bridge Input
- Power Cord
- 2-Year Manufacturer Warranty
No posts found
