Kopul DAN-AOXM2 Overview
The Kopul DAN-AOXM2 Two-Channel XLR Analog Output Adapter for Dante Network enables you to incorporate analog audio gear you already own into your Dante network. With plug-and-play operation, the DAN-AOXM2 is automatically discovered by the network and ready to use once connected, making it easy to send highly detailed and clock-accurate audio to an analog mixing board, power amplifier, or powered speakers over Dante.
The DAN-AOXM2 connects to the network via its RJ45 Ethernet port and outputs two balanced line-level analog audio signals via its two, 3-pin XLR-M connectors. It delivers two channels of high-quality audio with up to 24-bit / 96 kHz D/A conversion, high SNR, low THD, and a wide frequency response of 20 Hz to 20 kHz.
The DAN-AOXM2 is PoE powered. It supports Dante Audio over IP and AES67 RTP transport formats and is compatible with Dante Domain Manager (DDM).
At a Glance
- Cost-effective solution for adapting analog gear to your Dante network
- Convert Dante audio to two channels of analog audio
- 2 balanced, line-level, analog audio signals on 3-pin, XLR-M connectors
- Plug-and-play operation
- Rugged ABS construction
- D/A conversion up to 24-bit / 96 kHz
- Wide dynamic range
- High Signal-to-Noise Ratio (SNR)
- Low Total Harmonic Distortion (THD)
- Configurable gain and attenuation
- Dante Audio over IP and AES67 RTP transport formats
- Powered via Power-over-Ethernet (PoE)
- Compatible with Dante Domain Manager (DDM)
Simple Plug-and-Play Operation
- Simply connect the DAN-AOXM2 and it’ s instantly discovered by the network.
- Let the Dante Controller do the rest of the work, like signal routing, configuring gain and attenuation, and enabling channels.
Road Ready
- The DAN-AOXM2 features a rugged ABS shell designed to withstand repeated transport in a toolbox or gear bag, and the stress of constant touring.
- The XLR cables feature molded strain relief that minimizes cable strain at the point where the cable connects with the adapter.
A Multitude of Applications
- Send audio to analog mixing boards, power amplifiers, and powered speakers over a Dante audio network
- Patch DSPs, analog compressors, and equalizers into a Dante system using a combination of Kopul Dante input and output adapters
- Create easy drop points for connecting overflow areas to a Dante network
- Send audio to multiple rooms in houses of worship, conference centers, theaters, and studios via Dante network
- Connect hearing aid loop amplifiers to your Dante audio network
EAN: 847628550520
Kopul DAN-AOXM2 Specs
| Maximum Signal Level | +18 dBu, Balanced |
| Output Gain | -6 dBu |
| Frequency Response | 20 Hz to 20 kHz (±0.5 dB) |
| Impedance | 150 Ohms (Balanced) 75 Ohms (Unbalanced) |
| Dynamic Range | >100 dB |
| Signal-to-Noise Ratio | >100 dB |
| Total Harmonic Distortion | <0.01% at +4 dBu |
| Connectors | RJ45 2 x XLR-M |
| Power | 802.3af PoE |
| Power Consumption | 2.6 W (Max) |
| Sample Rates | 44.1, 48, 96 kHz |
| Bit Depth | 24-Bit |
| Network Transport Protocol | Dante Audio over IP AES67 RTP |
| Construction | ABS |
| Dimensions | 4.5 × 1.1 × 1.1" / 11.4 × 2.8 × 2.8 cm |
| Weight | 5.6 oz / 159 g |
In the Box
- Kopul Two-Channel XLR Analog Output Adapter for Dante Network
- 2-Years Manufacturer Warranty
No posts found
