Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Lectrosonics DNT0212 - Dante 2 In/12 Out Network Processor
The DNT0212 from Lectrosonics is a processor that subscribes to channels on a Dante network and delivers them to an internal digital matrix for automatic mixing and processing, and to Dante network transmit channels. In addition, two analog line level inputs are provided for use with local audio sources such as voice evacuation announcements.
The outputs of the matrix can be assigned to a Dante transmit channel, an analog output and/or routed back to an input to be further mixed and processed with another input channel or matrix mix.
Thirty-two inputs from Dante receive channels
Two analog line level inputs
Sixteen outputs to Dante transmit channels
Eight line level analog outputs
Four microphone/line level analog outputs
Supports both switched and redundant modes in Dante operation
Post-mixing signal processing on all inputs (analog and digital)
Forty-eight independent automatic mixers with thirty-eight inputs per mixer and channel activity detectors
Support for multi-level mixing - mixes can be looped back and used as mixer inputs
Extensive signal processing including filters, delay and channel linking for dynamic processing (compressors, limiters)
Gain smoothing to prevent transient noise during instantaneous level changes
Four test signal generators available for system setup and testing
Extensive macro command language
Control interfaces via USB, RS-232, Ethernet and programmable logic I/O
Rack mount or under table mount
The DNT0212 from Lectrosonics is a processor that subscribes to channels on a Dante network and delivers them to an internal digital matrix for automatic mixing and processing, and to Dante network transmit channels. In addition, two analog line level inputs are provided for use with local audio sources such as voice evacuation announcements.
The outputs of the matrix can be assigned to a Dante transmit channel, an analog output and/or routed back to an input to be further mixed and processed with another input channel or matrix mix.
Thirty-two inputs from Dante receive channels
Two analog line level inputs
Sixteen outputs to Dante transmit channels
Eight line level analog outputs
Four microphone/line level analog outputs
Supports both switched and redundant modes in Dante operation
Post-mixing signal processing on all inputs (analog and digital)
Forty-eight independent automatic mixers with thirty-eight inputs per mixer and channel activity detectors
Support for multi-level mixing - mixes can be looped back and used as mixer inputs
Extensive signal processing including filters, delay and channel linking for dynamic processing (compressors, limiters)
Gain smoothing to prevent transient noise during instantaneous level changes
Four test signal generators available for system setup and testing
Extensive macro command language
Control interfaces via USB, RS-232, Ethernet and programmable logic I/O
Rack mount or under table mount
Lectrosonics DNT0212 Specs
| Audio Inputs | (Balanced microphone/line level inputs with digitally programmable gain may be configured as unbalanced inputs) Audio Input Channels Digital: 32 Dante channels Analog: 2 line level analog (for paging) Gain: -20 dB to +20 dB Impedance: 15k© differential, 3.75k© common Maximum Analog Input Level: 20 dBu Dynamic Range: 102 dB THD + Noise: 0.01% A-D Sampling Rate: 48 kHz, fixed |
| Audio Outputs | Digital: 16 Dante transmit channels Analog: 12 channels Level: 0 dBu nominal Impedance: <50© source to drive 600© minimum load Channels 9~12 include 20 dB and 40 dB attenuators |
| Dante Interface | Provides dual RJ-45 connectors on the rear panel and an Ethernet switch built into the processor Supported Sampling Rate: 48 kHz Data Rate LED: 100 Mbps/1 Gbps Activity LED: Blinks when active Modes of Operation Switched mode using either connector Redundant mode with primary and secondary networks using both connectors |
| Network Connectivity | Dante interface and Ethernet control can be connected to the same network |
| Filters | All filters have zero processing delay EQ Stages: 4 per input channel |
| Internal Signal Generator | Swept Sine Modes: Single sweep, continuous sweep Waveforms: Sawtooth (up or down), triangle Sweep Rate: Linear, logarithmic Parameters: Start freq, stop freq, level (dBu), sweep time (sec) White Noise Parameter: Level (dBu) Pink Noise Parameter: Level (dBu) Tone (Sine Wave) Parameters: Level (dBu), frequency |
| Filter Type | Low Pass Butterworth 6, 12, 18, 24 dB/octave Bessel 6, 12, 18, 24 dB/octave Linkwitz-Riley 12, 24 dB/octave Additional Parameters: Frequency (Hz) High Pass Butterworth 6, 12, 18, 24 dB/octave Bessel 6, 12, 18, 24 dB/octave Linkwitz-Riley 12, 24 dB/octave Additional Parameters: Frequency (Hz) Low Shelving Butterworth 6, 12, 18, 24 dB/octave Bessel 6, 12, 18, 24 dB/octave Additional Parameters: Frequency (Hz), boost/cut (dB) High Shelving Butterworth 6, 12, 18, 24 dB/octave Bessel 6, 12, 18, 24 dB/octave Additional Parameters: Frequency (Hz), boost/cut (dB) Peaking EQ Parametric Parameters: Frequency (Hz), bandwidth (octave), boost/cut (dB) |
| Compressor | Soft knee with RMS level detector eliminates need for separate attack and delay settings 0.1 ms increments 1 second maximum Continuously adjustable ratio |
| Power Requirements | 100~240 VAC, 50/60 Hz 20 W maximum consumption |
| Dimensions | 19 x 7.7 x 1.75" (483 x 196 x 44 mm) |
| Weight | 5.3 lb (1.7 kg) |
Packaging Info
| Package Weight | 8.45 lb |
| Box Dimensions (LxWxH) | 24.5 x 14.5 x 6.25" |
In the Box
- Lectrosonics DNT0212 - Dante 2 In/12 Out Network Processor
- AC Power Cable
- 3-Year Manufacturer Warranty
No posts found
