EAN: 813721013354
The RDL AV-LN4 is a 4-channel line-level audio to Dante network interface designed to convert multiple line-level signals to Dante digital audio network channels for A/V technicians, system installers, and audio engineers in live stage applications and educational facilities. Its four XLR 3-pin female line-level inputs go through high-grade, low-noise A/D conversion at up to 24-bit / 48 kHz resolution, then feed the RJ45 Neutrik etherCON output port.
All inputs feature dual-LED VU meters and support for balanced +4 dBu analog audio. The AV-LN4 supports powering via a PoE network switch or a 24 VDC external power supply (available separately). Engineered and manufactured in the USA, it boasts a durable metal enclosure for reliable toughness.
Converts up to four line-level analog signals to Dante network audio channels
Four XLR 3-pin female inputs
Configuration requires no special software
Dante output via RJ45 Neutrik etherCON jack
Supports powering via PoE-enabled network switch or from a 24 VDC external power supply (available separately)
If PoE power and an external 24 VDC supply are both feeding the AV-LN4, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply
Valid power and synchronization to the Dante network is indicated by a green front-panel LED
Constructed in a durable all-metal enclosure suitable for free-standing, surface-mounted, or rack-mounted operation
Chassis design protects front-panel switches
Mountable on a mic stand via RDL SF-MSM1 adapter (available separately)
Includes mounting brackets for fixed installation
Engineered and manufactured in the USA for continuous duty in demanding installations
RDL AV-LN4 Specs
| Inputs | 4 x XLR 3-Pin Female |
| Outputs | 1 x RJ45 Neutrik etherCON |
| Ethernet Protocol | Dante |
| PoE | Class 0, IEEE 802.3af |
| Transmission Rate | 100 Mb/s |
| Bit Depth | 24 |
| Sample Rates | 44.1 or 48 kHz (Default) |
| Nominal Operating Level | -20 dBFS = +4 dBu |
| Reference Level | 0 dBFS = +24 dBu |
| Maximum Input Level | +24 dBu |
| Input Impedance | >50 Kilohms |
| Frequency Response | 20 Hz to 20 kHz (±0.1 dB) |
| THD + N | <0.025% (20 Hz to 20 kHz, +4 dBu / -20 dBFS) 0.005% at 1 kHz (Typical) |
| Noise | < -85 dB below +4 dBu |
| Common Mode Rejection Ratio | >70 dB (50 to 120 Hz) |
| Crosstalk | < -80 dB (20 Hz to 20 kHz at Operating Level, Any Input to Any Input) < -85 dB (1 kHz) |
| Ambient Operating Environment | 32 to 122°F / 0 to 50°C |
| Indicators | Front Panel: Sync, Dual-LED VU Meter Rear Panel: Ethernet Link and Speed |
| Power Requirements | PoE Class 0, IEEE 802.3af or 24 VDC at 500 mA, Ground-Referenced |
| Enclosure Material | Metal |
| Dimensions | 5.2 x 1.7 x 6" / 13.2 x 4.3 x 15.2 cm |
| Weight | 1.5 lb / 0.7 kg |
| Country of Manufacture | United States of America |
| Measurement Conditions | Gain/Level: ±1 dB Source Termination: 150 Ohms A/D Values: Measured in Digital Domain |
Packaging Info
| Package Weight | 1.845 lb |
| Box Dimensions (LxWxH) | 6.9 x 6.3 x 2.8" |
In the Box
- RDL AV-LN4 4-Channel Line-Level Audio to Dante Network Interface
- Mounting Brackets
- 3-Year Warranty
No posts found
