Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
RDL DB-BT1A Wall-Mounted Bluetooth Audio Format-A Interface (Black)
EAN: 813721011282
The black RDL DB-BT1A is a wall-mounted Bluetooth audio Format-A interface offering a sleek solution for integrating Bluetooth audio sources into installed sound systems in fitness facilities, retail stores, restaurants, and more. Since it requires no special software to configure and boasts 1-button pairing with LED indication, the DB-BT1A is simple and quick to set up.
Equipped with two RJ45 ports, the DB-BT1A can either send received Bluetooth audio in mono or stereo directly to an RDL Format-A receiver (available separately) or daisy-chain in mono with two other D-Series BT1A modules (available separately) to a single Format-A receiver.
The DB-BT1A is remotely powered through twisted pair cable and features signal and power pair pass-through on RJ45 jacks, eliminating the need for individual external power sources.
EAN: 813721011282
The black RDL DB-BT1A is a wall-mounted Bluetooth audio Format-A interface offering a sleek solution for integrating Bluetooth audio sources into installed sound systems in fitness facilities, retail stores, restaurants, and more. Since it requires no special software to configure and boasts 1-button pairing with LED indication, the DB-BT1A is simple and quick to set up.
Equipped with two RJ45 ports, the DB-BT1A can either send received Bluetooth audio in mono or stereo directly to an RDL Format-A receiver (available separately) or daisy-chain in mono with two other D-Series BT1A modules (available separately) to a single Format-A receiver.
The DB-BT1A is remotely powered through twisted pair cable and features signal and power pair pass-through on RJ45 jacks, eliminating the need for individual external power sources.
- Bluetooth audio input for installed sound system
- Intuitive single-button pairing with LED status indication
- Special software not required for module setup
- Customize the module ID name and programming password through the Bluetooth connection
- Sends received Bluetooth audio to RDL Format-A receivers
- Mono summed or stereo audio input mode is switch-selectable on rear panel
- Rear-panel switch selects which RJ45 pair (A, B, or C) is fed in mono summed mode
- Daisy-chain up to three D-Series BT1A modules to one Format-A receiver in mono mode
- Remotely powered through twisted pair cable
- Signal and power pair pass-through on RJ45 jacks
RDL DB-BT1A Specs
| Input | RJ45 Loop In |
| Output | RJ45 RDL Format-A |
| Format | A, B, or C (Summed Mono Mode, Rear-Panel Switch-Selectable) B and C (Stereo Mode, Pair A Pass-Through) |
| Frequency Response | 20 Hz to 20 kHz (±0.5 dB) |
| THD + N | <0.1% |
| Noise | < -70 dB (Below -20 dBFS) |
| Crosstalk | <70 dB (Channel to Channel) |
| Operating Level | -20 dBFS = +4 dBu (Balanced, Nominal) |
| Operating Temperature | 32 to 104°F / 0 to 40°C |
| Power Requirement | 24 VDC at 100 mA via RJ45 |
| Dimensions | 1.7 x 4.1 x 1.6" / 4.4 x 10.4 x 4.1 cm |
| Weight | 0.3 lb / 0.1 kg |
Packaging Info
| Package Weight | 0.46 lb |
| Box Dimensions (LxWxH) | 4.9 x 4.1 x 2.2" |
In the Box
- RDL DB-BT1A Wall-Mounted Bluetooth Audio Format-A Interface (Black)
- 3-Year Warranty
No posts found
