Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Shure ANI22BLOCK Audio Network Interface (Block Connectors)
EAN: 042406512596
The ANI22 Audio Network Interface from Shure is designed to bring up to two line/mic signals onto or from a Dante network. It can be utilized for easy audio routing and convenient browser-based remote control. In addition, it is built with analog block connectors.
Works with Microflex Advance and Microflex Wireless systems
2 input and 2 output analog audio connectors
Converts up to 2 mic / line analog signals onto a Dante Network
Converts up to 2 Dante digital audio signals to line/ mic analog signals
Power over Ethernet (PoE) eliminates need for outboard power supply
Compact form factor is easy to mount without equipment rack
EAN: 042406512596
The ANI22 Audio Network Interface from Shure is designed to bring up to two line/mic signals onto or from a Dante network. It can be utilized for easy audio routing and convenient browser-based remote control. In addition, it is built with analog block connectors.
Works with Microflex Advance and Microflex Wireless systems
2 input and 2 output analog audio connectors
Converts up to 2 mic / line analog signals onto a Dante Network
Converts up to 2 Dante digital audio signals to line/ mic analog signals
Power over Ethernet (PoE) eliminates need for outboard power supply
Compact form factor is easy to mount without equipment rack
Shure ANI22BLOCK Specs
| Inputs (Analog) | 2 x 6-pin block connectors |
| Outputs (Analog) | 2 x 3-pin block connectors |
| Dante Connection | 1 x RJ45 Channel Count: 2 inputs, 2 outputs |
| Polarity | Non-inverting, any input to any output |
| Power Requirements | Power over Ethernet (PoE), Class 0 (PoE Plus compatible) |
| Power Consumption | 11 W maximum |
| Application Control | HTML5 |
| Operating Temperature Range | 20 to 104°F (-6.7 to 40°C) |
| Storage Temperature Range | 20 to 165°F (-29 to 74°C) |
| Thermal Dissipation | Maximum: 12.1 W (41.3 BTU/hr) Typical: 9.8 W (33.7 BTU/hr) |
Audio
| Frequency Response | 20 Hz to 20 kHz ±1 dB |
| Dante Audio Flows | Sampling Rate: 24-bit/48 kHz |
| Latency | Does not include Dante latency Analog to Dante: 0.35 ms Dante to Analog: 0.71 ms |
| Analog Gain Range | 51 dB (adjustable in 3 dB steps) |
| Dynamic Range | 113 dB, 20 Hz to 20 kHz, A-weighted, typical |
| Equivalent Input Noise | 20 Hz to 20 kHz, A-weighted, input terminated with 150 Ohms Analog Gain Setting = +0 dB, -93 dBV Analog Gain Setting = +27 dB, -119 dBV Analog Gain Settings = +51 dB, -130 dBV |
| Total Harmonic Distortion (THD) | <0.05% @ 1 kHz, 0 dBV input, 0 dB analog gain |
| Common Mode Rejection Ratio | >70 dB, 50 Ohms balanced source @ 1 kHz |
| Input Impedance | 5 kOhms |
| Output Impedance | 150 Ohms |
| Input Clipping Level | Analog Gain Setting = +0 dB, +20 dBV Analog Gain Setting = +27 dB, -7 dBV Analog Gain Setting = +51 dB, -31 dBV |
| Analog Output Levels | Selectable Line 0 dB Aux -20 dB Mic -46 dB |
| Digital Signal Processing (DSP) | Per Channel: Equalizer (4-band Parametric, Dante channels only), Mute, Limiter, Gain (140 dB range) System: Channel Summing |
| Networking | Cat 5e or higher (shielded cable recommended) |
| Dimensions | 1.6 x 5.5 x 5.0" (4 x 14 x 12.8 cm) |
| Weight | 1.5 lb (672 g) |
Packaging Info
| Package Weight | 2.7 lb |
| Box Dimensions (LxWxH) | 10.1 x 6.6 x 3.3" |
In the Box
- Shure ANI22BLOCK Audio Network Interface (Block Connectors)
- 2-Year Manufacturer Warranty
No posts found
