Ashly NE24.24MT Overview
Control and protect your installed sound system with the Ashly Protea NE24.24MT, a network-enabled DSP speaker processor that offers easy setup and control using standard 10/100 Ethernet protocol and Protea ne software. The ne24.24m has four analog inputs and four analog outputs as standard. Use the four option bays to provide additional I/O and functionality. This model includes one 4-channel input card and one 4-channel output card.
The rear panel utilizes Euroblock connectors for easy and secure wiring. Additionally, the 12V Digital Logic I/O uses a 9-pin Euroblock connector that can be assigned to trigger a preset recall or push-to-talk mic function. A 10-pin Euroblock connector is for the 5 VDC Remote Level Control, which allows for up to eight user-defined remote DC level controls.
At a Glance
- 10/100 Ethernet & RS-232 computer interface standard
- Extensive DSP available
- Easy and intuitive user interface
- Mic/line inputs
- 24-bit A/D D/A audio resolution
- Up to 24 channels of audio processing
- 4x4 base unit configuration
- Expand inputs or outputs 4 channels per module
- Modules easily field installable
- Euroblock connectors for audio, preset recall, DC remote level control, and data in/out
- 31 preset locations
- Remote controls for level, preset recall, and programmable functions
- Third-party control-friendly
- Input and output metering viewable in dBu
- Multilevel security
Protea DSP Functions and Processors
- Input source selection
- Brick wall limiter
- Compressor
- Autoleveler controls
- Ambient noise compensation (output only)
- Ducking (high/low priority, trigger, filibuster, ducked program)
- Gate
- Advanced gate controls
- Gain
- EQ:
- 15-band parametric
- High/Low Shelf 6/12 dB per octave
- All-Pass
- Variable Q HP/LP
- Notch/Band-Pass
- Crossover: 2-, 3-, 4-way crossover and High-Pass/Low-Pass filters
- Delay:
- Input time, distance, and temperature at 48 kHz sampling rate
- Input time, distance, and temperature at 96 kHz sampling rate
- Audio metering tool
- Signal Generator Tool (pink noise, white noise, sine wave)
- Matrix mixer
- Processors
Ashly NE24.24MT Specs
General
| Compatibility | Not Specified by Manufacturer |
| Frequency Response | 20 Hz to 20 kHz (±0.25 dB) |
| THD | <0.01% at 1 kHz, +20 dBu |
| Dynamic Range | >110 dB (20 Hz to 20 kHz) Unweighted |
| Signal to Noise Ratio | <-90 dBu Unweighted |
In the Box
- Ashly Protea ne24.24MT Matrix Digital Signal Processor with 8x8 I/O
- AC Power Cable
- Set of Block Connectors
No posts found
