Dynacord MXE5 Overview
Control, mix, and route audio signals through professional audio systems with the Dynacord MXE5 Matrix Mix Engine, an open architecture audio matrix and system controller with professional sound quality, Dante network, and AES70/OCA control. The MXE5 is designed for fixed and live audio installations such as stadiums, arenas, houses of worship, concert halls, theaters, and other applications that require high-performance multichannel audio system controllers with sophisticated signal processing and networking.
The performance audio matrix with 12 analog mic/line inputs, 8 line outputs and 24x24 Dante channels provides configurable matrix blocks with up to 3840 cross-points and up to 256 internal signal-paths. The configuration allows the choice between a fixed or a free DSP configuration. At the same time, the MXE5 serves as a control center and communications hub for system devices and IP-based peripherals, providing comprehensive supervision of system-wide commands. The MXE5 ships with a set of Euroblock connectors and a power cord.
Benefits
- Open architecture DSP matrix for high-performance audio applications
- 12 mic/line inputs, 8 line outputs, 8 configurable GPIOs
- 24x24 OMNEO/Dante channels
- Task Engine for sophisticated system control and integration
- Integrated into SONICUE Sound System software
Delivers High-Quality Audio
MXE5 benefits from advanced DSP and latest technology, providing outstanding audio quality. This is ensured by an internal sampling rate of 96 kHz (switchable to 48 kHz), more than 118 dB of dynamic range and the industry's lowest audio latency of less than 0.22 ms.
Flexible Applications
MXE5 is designed for consultants, specifiers, system integrators and production companies who demand the highest-quality audio and uncompromising live performance sound.
SONICUE Sound System Software
MXE5 integrates seamlessly with Dynacord's SONICUE Sound System Software, one of the most powerful software interfaces in the industry. It offers comprehensive control and easy, intuitive operation. SONICUE allows the design of customized control panels running on TPC-1, WPN1, or network computers utilizing the SONICUE Control app. MXE5 also features plug-ins for Crestron and Q-SYS systems.
Made for Mixing and Routing
MXE5 offers a variety of functions beyond being a powerful DSP processor and cross point matrix. MXE's Task Engine is a freely programmable logic engine that transforms it into a sophisticated system manager and an OCA controller with comprehensive monitoring and supervision capabilities.
EAN: 800549852166
Dynacord MXE5 Specs
General
| Compatibility | Not Specified by Manufacturer |
| Frequency Response | 20 Hz to 20 kHz (±0.5 dB) (1 kHz, Analog In to Analog Out, 48 kHz) 20 Hz to 40 kHz (±0.5 dB) (1 kHz, Analog In to Analog Out, 96 kHz) |
| Signal to Noise Ratio | Analog Input: >118 dBA Analog Output: >118 dBA Analog Input to Analog Output: >115 dBA |
| EIN | <-128 dB (20 Hz to 20 kHz, A-Weighted) |
| THD+N | <0.002% (1 dB Below Maximum, at 1 kHz) |
| Crosstalk | <-105 dB (1 dB Below Maximum, at 1 kHz) |
| CMRR | > 70 dB (1 kHz, Nominal Level) |
| Phantom Power | +48 V / 10 mA, Switchable per Analog Input |
| Gain | 0 to +60 dB (Analog Inputs) |
| DSP | Sampling Rate: 48 kHz / 96 kHz, OMNEO / Dante Synchronized Signal Delay / Latency: < 0.45 ms / < 0.22 ms (Analog In to Analog Out, 48 kHz / 96 kHz ) Signal Processing: 32/40 Bit, Floating Point Filter: PEQ, Lopass, Hipass, Loshelv, Hishelv, XOver, FIR Dynamics: Ducker, Compressor, Noisegate Limiter: Peak (PA) Limiter, RMS / TEMP Limiter Pilot Tone: Generator, Detector with Notch Generators: Sine, Pink Noise, White Noise Mixer/Router: Router, Matrix Mixer Miscellaneous: VU Meter, Level, Polarity, Mute, Delay Special Algorithms: Speaker Processing Memory: DSP Presets 60 |
| Performance | Nominal Input / Output Level: +6 dBu / 1.55 V Maximum Input / Output Level: +22 dBu / 9.7 V Reference Level Equal to Digital Input: +22 dBu for 0 dBFS Input Impedance: 2.2 Kilohms (Active Balanced) Output Impedance: 47 Ohms (Active Balanced) Minimum Load Impedance: 600 Ohms |
Display
| Panel Type | OLED |
| Display Size | Not Specified by Manufacturer |
| Native Resolution | 256 x 64 |
| Touchscreen | No |
| Controls and Indicators | Front-Panel Indicators 12 x Input LEDs (Signal/Clip) 12 x Phantom Power LEDs (+48 V) 8 x Output LEDs (Signal/Clip) 4 x Status LEDs (Power, Standby, Fault, OMNEO) Front-Panel Operating Elements: 3 Push Buttons (Up, Enter, Down) Rear-Panel Indicators: 1 x Status LED (Status) Rear-Panel Operating Elements: Mains Switch |
Inputs / Outputs
| Audio I/O | 6x Block 6-Pin Line/Mic Input 4x Block 6-Pin Line Output |
| Network | 1 x RJ45 OMNEO / OCA Control Port 2 x OMNEO/Dante/OCA (Primary / Secondary) Ports Standards: 1000Base-T / 100Base-TX, Integrated Switch Network Audio Inputs: 24 Channels, 48 kHz / 96 kHz, OMNEO/Dante Format Network Audio Outputs 24 channels, 48 kHz / 96 kHz, OMNEO/Dante Format |
| Control Port | GPIO: 15-Pin Euroblock Connector, Control Port / GPIO Ports and Operating Modes: 8 x GPIO, Switchable Analog In / Digital In / Digital Out Analog Input Range: 0 to +11 V (110 Kilohms Input Resistance) Digital Inputs ON: <1.5 V OFF: >2.0V, Internal Pull-Up (10 Kilohms) Digital Outputs ON: Output Switched to Ground, Maximum 200 mA OFF: Open Collector (110 Kilohms to Ground) Reference Voltage Output +10 V, Maximum 200 mA, Supervised, Short-Circuit Protected Ready / Fault Contact Galvanic Isolated Relay, Maximum 30 VDC / 500 mA |
Power
| Power Source | AC Input (Included) |
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
| Power Consumption | 55 W (Maximum) |
Environmental
| Environmental Protection | No |
| Operating Temperature | 23 to 113°F / -5 to 45°C |
Physical
| Color | Black |
| Cable Length | Not Specified by Manufacturer |
| Dimensions | 19 x 18.5 x 1.7" / 483 x 471 x 43.5 mm |
| Weight | 13.2 lb / 6 kg |
In the Box
- Dynacord MXE5 Matrix Mix Engine 24x24-Channel with 12x8 I/O and Dante
- 10 x 6-Pin Euroblock Connectors (Input/Output)
- 15-Pin Euroblock Connector (GPIO)
- IEC Power Cable
- 3-Year Manufacturer Warranty
No posts found
