Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
TASCAM MM-4D/IN-X 4-Channel Mic/Line Input Dante Converter with Built-In DSP Mixer
EAN: 043774033881
The MM-4D/IN-X 4-Channel Mic/Line Input Dante Converter with Built-In DSP Mixer from TASCAM can be used to convert 4-channel mic/line input signals on XLR connectors into 4-channel Dante input/output signals for pro audio applications.
The MM-4D/IN-X Input/Output Dante Converter features level control and is compatible with Dante Domain Manager software, which offers security functions, enables the use of wide area networks, and provides easy access to Dante systems using already established network infrastructures. With AES67 mode, connection to AES67 network systems is also possible. Two installation brackets are included.
4-channel mic/line input with phantom power (+48v) support on 3-pin XLR connectors
4 Dante inputs/outputs
Supports PoE (Power over Ethernet)
Sample rate up to 24-bit / 96 kHz
Supports Dante daisy-chain, which allows two Dante Compact Processor models to be connected without a network switch
Compatible with Dante Domain Manager and Dante AES67 mode
Flexible scene preset function allows you to work in different area situations (up to 50 presets)
Two types of user-control software available for Windows/Mac/iOS/Android devices:
EAN: 043774033881
The MM-4D/IN-X 4-Channel Mic/Line Input Dante Converter with Built-In DSP Mixer from TASCAM can be used to convert 4-channel mic/line input signals on XLR connectors into 4-channel Dante input/output signals for pro audio applications.
The MM-4D/IN-X Input/Output Dante Converter features level control and is compatible with Dante Domain Manager software, which offers security functions, enables the use of wide area networks, and provides easy access to Dante systems using already established network infrastructures. With AES67 mode, connection to AES67 network systems is also possible. Two installation brackets are included.
4-channel mic/line input with phantom power (+48v) support on 3-pin XLR connectors
4 Dante inputs/outputs
Supports PoE (Power over Ethernet)
Sample rate up to 24-bit / 96 kHz
Supports Dante daisy-chain, which allows two Dante Compact Processor models to be connected without a network switch
Compatible with Dante Domain Manager and Dante AES67 mode
Flexible scene preset function allows you to work in different area situations (up to 50 presets)
Two types of user-control software available for Windows/Mac/iOS/Android devices:
TASCAM DCP CONNECT, for integrators: input/output routing selection, DSP/design/scene settings of the complete system, etc.
TASCAM EZ CONNECT, for end-users: simple app design for only the necessary functions such as area-volume settings, etc.
Remote control via Dante
Half-rack mountable size
Equipped with indicators that show LAN/Dante connection status and sample rate
Equipped with signal indicators that monitor digital input/output signals
Configurable reference level (via remote control only)
Surface-mount adapters for installation under desks included
TASCAM MM-4D/IN-X Specs
General
| Formats Supported | 44.1/48/88.2/96 kHz, 16/24-Bit, 4 Channels |
Input/Output
| Connector | RJ-45 |
| Transmission Protocol | Dante |
| Gigabit Ethernet | 1000 BASE-T (IEEE 802.3ab) |
| Cable | Category 5e or Faster STP Cables |
Analog Inputs
| Connector | 3-Pin XLR Connectors (1: GND, 2: HOT, 3: COLD) |
| Minimum Input Level | -70 dBu |
| Maximum Input Level | +26 dBu |
| Input Impedance | 2.0 kOhms or Higher |
Audio Performance
| Equivalent Input Noise | -125 dBu (150 Ohms, 22 kHz LPF+A, JEITA) |
| Frequency Response | Dante In / Dante Out: ±0.5 dB: 20 Hz - 20 kHz (44.1/48 kHz Sampling Frequency, JEITA) ±0.5 dB: 20 Hz - 40 kHz (88.2/96 kHz Sampling Frequency, JEITA) |
| Distortion | 0.003 % (when ’1 dBFS Input, 44.1/48/88.2/96 kHz Sampling Frequency, JEITA) |
| Signal to Noise Ratio | 108 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA) |
| Crosstalk | 100 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA) |
| Dynamic Range | 108 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA) |
Other Features
| Power | PoE Class 0 TASCAM PS-P1220E AC Adapter (Sold Separately) |
| Power Consumption | 7.5 W |
| Operating Temperature | 32 to 104°F / 0 to 40°C |
| Dimensions | 8.4 x 1.7 x 5.4" / 21.4 x 4.4 x 13.6 cm |
| Weight | 31.2 oz / 885.0 g |
Packaging Info
| Package Weight | 2.94 lb |
| Box Dimensions (LxWxH) | 10.95 x 8.3 x 4.2" |
In the Box
- TASCAM MM-4D/IN-X 4-Channel Mic/Line Input Dante Converter with Built-In DSP Mixer
- 2 x Installation Brackets
- 2-Year Warranty for Parts, 2 Year Warranty for Labor
No posts found
