EAN: 043774033645
The MX-8A 8-Input / 8-Output Matrix Mixer with DSP from Tascam features eight mic/line inputs and eight-line outputs on Euroblock connectors as well as integrated DSP for audio optimization in various environments and configurations. It can be used to mix mic and playback-equipment audio signals into eight different zones for easy setup and adjustment by both system integrators and end users, making it suitable for stores, restaurants, or banquet rooms.
The MX-8A s onboard DSP provides a full set of audio processing for mic and line inputs including compression, four-parametric EQ, auto level, ducking, and more. In addition, the output DSP offers 10-band EQ, high-pass filters, low-pass filters, delay, and limiter effects.
Additionally, Tascam s MX Connect remote control software is designed for integrators and provides control over the configuration and settings of the entire system. Tascam s EZ Connect software is designed for end-users and provides control over a variety of settings. The MX-8A 8-Input / 8-Output Matrix Mixer with DSP includes a power cord, sixteen Euroblock plugs, a cable band kit, and a rackmount screw kit.
Matrix mixer with eight mic/line input channels and eight line output channels
Euroblock terminals, which are optimal for permanent installations, used for input/output connectors
Extensive onboard DSP for audio processing according to application and conditions
Remote control via Ethernet possible
USB audio interface supports easy recording and background music playback with a computer
Support for serial control systems possible with built-in RS-232C connector
RS-485 connector enables connection of a dedicated external controller
Compact 1U rackmount size
TASCAM MX-8A Specs
| Format | 44.1 kHz / 48 kHz, 16-Bit / 24-Bit |
| Connector | 4-Pin USB b-Type |
| Transfer Rate | USB 2.0 High-Speed (480 Mbps) |
| Analog In | Connector: Euroblock (Balanced) 3.81 mm Pitch |
| Minimum Input Level | -70 dBu |
| Maximum Input Levels | Microphone: +26 dBu Line: +24 dBu Input Impedance: 2.2 kOhms or Higher |
| Analog Output | Connector: Euroblock (Balanced) 3.81 mm Pitch |
| Nominal Output Level | +4dBu (When Ref.Level Set to Other Than -9 dBFS) +6dBu (When Ref.Level Set to -9 dBFS) |
| Maximum Output Level | Switchable: +15 dBu (Ref.Level: -9 dBFS) +18 dBu (Ref.Level: -14 dBFS) +20 dBu (Ref.Level: -16 dBFS) +22 dBu (Ref.Level: -18 dBFS) +24 dBu (Ref.Level: -20 dBFS) |
| Output Impedance | 200 Ohms or Lower |
| RS-485 | Connector: RJ-45 Cables: Category 5e or Faster STP Cables |
| Ethernet | Connector: RJ-45 Transmission Protocol: TCP/IP Ethernet Standard: 100BASE-TX Cables: Category 5e or Faster STP Cables |
| Power | AC 100 to 240 V, 50/60 Hz |
| Power Consumption | 21 W |
| Operating Temperature Range | 32 to 104°F / 0 to 40°C |
| Dimensions | 19.0 x 1.8 x 12.0" / 48.3 x 4.5 x 30.4 cm |
| Weight | 6.6 lb / 3.0 kg |
Packaging Info
| Package Weight | 10.04 lb |
| Box Dimensions (LxWxH) | 21.6 x 17.2 x 5.9" |
In the Box
- TASCAM MX-8A 8-Input / 8-Output Matrix Mixer with DSP
- Power Cord
- 16 x Euroblock Plugs
- Cable Band Kit
- Rackmount Screw Kit
- 2-Year Warranty for Parts, 2 Year Warranty for Labor
No posts found
