Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Atlas Sound M1000 8 Dual-Cone Sound Masking Speaker (Black)
EAN: 612079179930
The black M1000 8 Dual-Cone Sound Masking Speaker by Atlas Sound is designed to deliver an adjustable spectrum of sound masking in open office plans. A masking generator (not included) feeds pink noise into an Atlas Sound commercial 70V amplifier (not included), which in turn feeds the M1000 masking speaker to produce a random low-level sound throughout the coverage area. The result is increased speech privacy and a reduced perceived level of noise.
To ensure ample low-frequency response, the M1000 masking speaker s 734 cubic inch enclosure houses an 8 dual-cone loudspeaker and a 70.7V transformer. An external selector switch provides a selection of wattage taps ranging from 0.25W to 4W, plus an off position , for precise level adjustments. The masking speaker is designed to be installed above suspended ceiling systems or open ceiling spaces and is approved for use in plenum ceilings. Its suspension system features two factory-installed collapsible galvanized hangers configured to allow upward, downward, or horizontal orientation. Typically the M1000 is installed with contractor-provided strong ceiling grid suspension wire.
Depending on the size of the area you wish to cover and the level of sound masking you require, various combinations of generators and amplifiers can be used with the M1000. For example, an Atlas ASP-MG24 4 channel masking generator can be connected to an Atlas PA1001G amplifier to power up to about eighty M1000 sound masking speakers tapped at 1W. To meet most local code requirements, the M1000 includes a termination cover containing both knockouts and a strain relief. This system will allow the use of rigid or flexible conduit, if required, and easily accommodates through connections on the removable plate.
Provides increased speech privacy and a reduced perceived level of noise
Pre-assembled unit includes 8 diameter loudspeaker, transformer, enclosure, baffle, and mounting hardware
Suitable for use above suspended ceiling systems or in open ceiling spaces
Certified by ETL and meets UL1480 & UL2043 standards for use in air handling (plenum ceilings)
Complete with snap hanger assembly for quick and easy installation
Design enables upward, downward, or horizontal orientation
Input panel includes combination knock-out and strain relief connector to accommodate flexible or rigid conduit
734 inA³ enclosure for extended low frequency response
EAN: 612079179930
The black M1000 8 Dual-Cone Sound Masking Speaker by Atlas Sound is designed to deliver an adjustable spectrum of sound masking in open office plans. A masking generator (not included) feeds pink noise into an Atlas Sound commercial 70V amplifier (not included), which in turn feeds the M1000 masking speaker to produce a random low-level sound throughout the coverage area. The result is increased speech privacy and a reduced perceived level of noise.
To ensure ample low-frequency response, the M1000 masking speaker s 734 cubic inch enclosure houses an 8 dual-cone loudspeaker and a 70.7V transformer. An external selector switch provides a selection of wattage taps ranging from 0.25W to 4W, plus an off position , for precise level adjustments. The masking speaker is designed to be installed above suspended ceiling systems or open ceiling spaces and is approved for use in plenum ceilings. Its suspension system features two factory-installed collapsible galvanized hangers configured to allow upward, downward, or horizontal orientation. Typically the M1000 is installed with contractor-provided strong ceiling grid suspension wire.
Depending on the size of the area you wish to cover and the level of sound masking you require, various combinations of generators and amplifiers can be used with the M1000. For example, an Atlas ASP-MG24 4 channel masking generator can be connected to an Atlas PA1001G amplifier to power up to about eighty M1000 sound masking speakers tapped at 1W. To meet most local code requirements, the M1000 includes a termination cover containing both knockouts and a strain relief. This system will allow the use of rigid or flexible conduit, if required, and easily accommodates through connections on the removable plate.
Provides increased speech privacy and a reduced perceived level of noise
Pre-assembled unit includes 8 diameter loudspeaker, transformer, enclosure, baffle, and mounting hardware
Suitable for use above suspended ceiling systems or in open ceiling spaces
Certified by ETL and meets UL1480 & UL2043 standards for use in air handling (plenum ceilings)
Complete with snap hanger assembly for quick and easy installation
Design enables upward, downward, or horizontal orientation
Input panel includes combination knock-out and strain relief connector to accommodate flexible or rigid conduit
734 inA³ enclosure for extended low frequency response
No posts found
