The Sennheiser HMD 300 XQ-2 is comprised of the HMD 300 Pro communications headset and the Cable-II-X3K1-Gold headset cable. The headset s closed-back, over-ear design provides up to 32 dB of passive noise attenuation while the padded headband and earcups ensure comfortable wearing. The detachable 6.6 straight cable features a coiled section to mitigate handling noise. It utilizes copper wiring and is terminated with gold-plated XLR 3-pin and 1/4" jacks.
Sennheiser HMD 300 Pro Headset with Boom Microphone (Without Cable)
The Sennheiser HMD 300 PRO is a closed-back, circumaural communications headset with a sonic design based on the HD 250 linear headphones, giving you a detailed, linear response. The headset features a comfortable construction with split-headband padding to remove pressure from sensitive areas of the head.
With a frequency response of 60 Hz to 25 kHz, the headphones provide clear reproduction of audio, doing so while offering up to 32 dB of passive noise reduction. The headset offers a dynamic boom microphone, one that delivers a hypercardioid polar pattern for focusing on vocals, and a frequency range centered around picking up the human voice in communication settings (80 Hz to 16 kHz). You can adjust the gain of the microphone in 5 dB steps over a range of 45 dB in total.
The headband supporting the unit s earcups is rugged, bendable, and twistable, and the boom can be worn on either side of the headset. To preserve your hearing, the headset features a switchable noise-protection mode called ActiveGard that protects against sudden bursts of sound without interrupting the signal.
The HMD 300 Pro sports a modular cable design to accommodate multiple pin-outs and configurations. Though no cable is included with the headset, each of the compatible cables sport a design that minimizes handling noise this is achieved with a small series of coils on the cable approach that decouple the cable from the headset.
ActiveGard Technology
- This sound compression system consists of an electrical circuit incorporated into analogue headsets.
- Compression technology removes the energy from an excessive incoming signal transmitted through the communication system, leaving the signal free of distortion.
- The ActiveGard circuit can be compared to an automatic and fast-working intelligent volume control. If an incoming signal rises to a level that is harmful to your hearing, it is instantly turned down to a lower, more comfortable level.
- When the incoming signal returns to safe levels, ActiveGard reverts to its stand-by surveillance mode and volume is restored to its original level.
Key Features at a Glance
- Switchable ActiveGard mode for hearing protection
- Linear sound reproduction optimized for speech intelligibility
- Microphone can be worn either on right or left side
- Comfortable padding design allows for extended use in long wearing sessions
- Passive ambient noise attenuation due to closed earcup construction
- Foldable earcup design
EAN: 615104272194
Sennheiser Cable-II-X3K1-Gold Straight Cable with XLR & 1/4" Connectors for HMD Headsets (6.6 )
The 6.6 Sennheiser Cable-II-X3K1-Gold is a straight copper cable with XLR and 1/4" connectors designed for use with select Sennheiser HMD and HME headsets in broadcast and communications applications. With a proprietary connector at the headset end and XLR 3-pin and 1/4" jacks at the other, it is compatible with HMD 300/301 Pro, HMD/HME 26-II, and HMD/HME 27 Pro headsets.
It utilizes copper wire and gold-plated contacts to enhance conductivity while maintaining a flexible shield. A coiled section reduces handling noise and the aramid reinforcement delivers increased durability.
Compatible with HMD 300 Pro, HMD 301 Pro, HMD 26-II, HME 26-II, HMD 27 Pro, and HME 27 Pro headsets
Straight copper cable with coiled segment to eliminate structure-born noise
Reinforced with aramid for improved durability
Softer shield enhances flexibility
EAN: 615104321717
Sennheiser HMD 300 Pro Headset with Boom Microphone (Without Cable) Specs
Headphone
Maximum Sound Pressure Level (SPL) | 123 dB at 1 kHz |
Microphone
Type | Dynamic |
Pickup Pattern | Cardioid (Unidirectional) |
Packaging Info
Package Weight | 1.105 lb |
Box Dimensions (LxWxH) | 9.6 x 7.55 x 3.35" |
Sennheiser Cable-II-X3K1-Gold Straight Cable with XLR & 1/4" Connectors for HMD Headsets (6.6`) Specs
Compatible Headsets | HMD 300/301 Pro HMD/HME 26-II HMD/HME 27 Pro |
Construction Material | Copper cable Aramid reinforcement Gold-plated contacts |
Connector 1 | Proprietary connector with attachment screws |
Connector 2 | XLR 3-pin male |
Connector 3 | 1/4" TRS male |
Cable Length | 6.6` / 2 m |
Weight | 3.7 oz / 106 g |
Packaging Info
Package Weight | 0.25 lb |
Box Dimensions (LxWxH) | 9 x 5.5 x 0.5" |
In the Box
- Wind and Pop Screen
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
No posts found