Telex F.01U.405.617 Overview
The DSPK4-W IP 4-Channel Wall Mount User Station from Telex is a versatile IP-based digital speaker station that supports high-quality digital audio and employs standard Ethernet connectivity and three XLR connectors, which makes the device usable in any environment.
This wall mount version powers via an optional external DC power supply to a locking Kykon 3-pin connector and you can have peace of mind knowing you ll never suffer power interruptions since the device supports redundant power via PoE+ and PoE++ over a Neutrik etherCON connector with a voltage range from 42.5 to 57 VDC and 25W power consumption. A full-color TFT display and an icon-based menu interface allow you to execute local configuration of essential settings and preferences.
Features at a Glance
- Supports connections to an OMNEO Main Station (Digital Party Line) or an OMNEO capable matrix (ADAM or ADAM M with OMI installed or ODIN)
- Features a high-resolution TFT display, allowing user setup and configuration using an icon based GUI
- Supports power redundancy from an external DC power supply or the local +24 V terminal block to PoE+ / PoE++
- Supports Bluetooth audio connectivity via Bluetooth-enabled USB dongles and phone connectivity
EAN: 800549596121
Telex F.01U.405.617 Specs
Display | Display Type: TFT Backlight White LED with Adjustable Brightness (Active and Idle) Display Color: Color Resolution: 320 x 240 Size: 2.4" / 6.1 cm Color Depth: 16-Bit Active Viewing Area: 1.44 x 1.92" / 36.72 x 48.96 mm |
Viewing Angle | 80 in All Directions |
Ports | OMNEO Port Connector Type: Neutrik etherCON Number of Ethernet Ports: 2 Ethernet Type: 100/1000 Mb/s Audio Streaming: Full Duplex Number of Audio Channels: 2 |
Microphone Input | Microphone Element Type: Electret Connector Type: TRS 1/4" Jack Audio Input: Microphone Nominal Input Level: -42.5 dBu Maximum Input Level: -22.5 dBu Panel Mic Input Frequency Response: 70 Hz to 7.4 kHz |
Headphone Monitoring | Connector Type: 4-Pin XLR Male Audio Input: Microphone Microphone Element Type: Electret Nominal Input Level: -42.5 dBu Maximum Input Level: -22.5 dBu Microphone Element Type: Dynamic Nominal Input Level: -50 dBu Maximum Input Level: -30 dBu Headset Mic Input Frequency Response: 70 Hz to 7.4 kHz Headphone Amplifiers (XLR 1/2/3) Maximum Output Power: 80 mW for 150 Ohms Frequency Response: 200 to 20000 Hz |
Amplifier | Peak SPL: 90 dB SPL at Distance of 3.3` / 1 m Frequency Response: 200 to 12000 Hz |
Other I/O | Connector Type: Phoenix Terminal Block (Push-In Spring Connection) Control Ports: 1 GPI, 1 GPO Number of Relay Outputs: 1 Maximum Contact Current: 1 A Maximum Contact Voltage: 30 VDC Number of Optically Coupled Inputs: 1 |
Bluetooth | Microphone Input Frequency Response: 70 Hz to 3.4 kHz Headphone Response: 30 Hz to 19 kHz, 30 Hz to 3.4 kHz Version: 4.0 Approved Dongles: IO Gear GBU522, LM Technologies LM506 Range: 15` / 5 m Audio Codec: SBC |
Power Source | PoE+ / PoE++ PoE (Power over Ethernet) Connector Type: Neutrik etherCON POE+ IEEE 802.3at Type 2, Class 4 POE++ IEEE 802.3bt Type 3 and 4, Class 4 Voltage: 42.5 to 57 VDC Power Consumption: 25 W External DC Power Supply Input Type of Power Supply: VDC Connector Type: Locking Kycon 3-Pin Connector Input Voltage: 24 VDC Current (A): 280 mA DC Power Terminal Block Input Type of Power Supply: VDC Connector Type: Phoenix Terminal Block (Push-In Spring Connection) Input Voltage: 19 to 24 VDC Current (A): 280 mA External Power Supply Type of Power Supply: AC/DC Connector Type: IECC14 Input Voltage: 100 to 240 VAC Operating Voltage: 100 to 240 VAC at 50/60 Hz Power Consumption: 25 VA Power Consumption Maximum: 13 W |
Environmental | Operating Temperature: -4 to 122F / -20 to 50C Operating Relative Humidity (Non-Condensing): 5 to 90% Storage Temperature: -4 to 158F / -20 to 70C Storage Relative Humidity: 15 to 90% |
Dimensions (W x D x H) | 9.13 x 3.94 x 5.79 / 232 x 100 x 147 mm |
Weight | 2.97 lb / 1.35 kg |
In the Box
- Telex DSPK4-W IP 4-Channel Wall Mount User Station
- 2-Year Manufacturer Warranty
No posts found