The M2TND IEM Digital Half-Rack Transmitter from Lectrosonics features transmission power up to 50 mW for extended operating range and locking XLR/TRS combo connectors, that facilitate up to four channels of analog audio sources. With ultra-low latency, 24-bit audio, and two stereo-digital channels, the M2T is an IEM transmitter for professional broadcast applications.
Built with a USB port for firmware updates and an IR port for fast setups, the M2T transmitter has a large, high-resolution backlit color LCD with large membrane switches for an intuitive interface visible in daylight or dimly-lit conditions. Analog signals are converted to an internal 24-bit digital format that is encoded, organized into packets, and passed to an RF modulator. The RF signal is filtered before and after amplification to suppress out-of-band noise and spurious signals.
Additionally, the M2T transmitter employs a technology that provides a frequency response from 20 Hz to 15 kHz with maximum channel separation. This digital audio technology eliminates a compandor and the associated artifacts, resulting in crystal clear sound, rock-solid stereo imaging, and low distortion.
Lectrosonics M2TND Specs
| RF Power Output | 2 x RF carriers, 2 audio channels each 10, 25, or 50 mW; adjustable |
| Antenna Output | 2 x BNC sockets |
| Operating Frequencies | 470 to 608 MHz |
| Frequency Selection Steps | 25 kHz |
| Frequency Stability | ± 0.002% |
| Modulation | 8 PSK |
| Emission Designator | 200KG7E |
| Spurious Radiation | Compliant with ETSI EN 300 422-1 |
| Equivalent Input Noise | -128 dBV |
| Audio Frequency Response | 20 Hz to 15 kHz |
| Audio Input | -10 dBV or +4 dBu settings with ±5 dB trim |
| Audio Input Jack | 4 x combo XLR/TRS connectors |
| Dante Connection | Not applicable |
| Ethernet Connector | RJ45 |
| USB | Micro USB on front panel for firmware updates |
| IRDA | IR transceiver for sync of receivers |
| Input Impedance | Line: 2 kOhms |
| Headphone Jack | 1/8" / 3.5 mm stereo |
| Power Requirements | 9 to 18 VDC |
| Power Consumption | 5 W |
| Dimensions | 1.8 x 8.4 x 7.8" / 4.4 x 21.3 x 19.7 cm |
| Weight | Not specified by manufacturer |
In the Box
- Lectrosonics M2TND IEM Digital Half-Rack Transmitter (470 to 608 MHz)
- 2 Years Manufacturer Warranty
No posts found
