The U4T from Xvive Audio is a handheld plug-on transmitter that works with U4R receivers (available separately) to provide performers and presenters with a cost-effective and expandable solution that supplies 24-bit / 48 kHz digital sound quality to their favorite in-ear and headphone monitors. The system is well suited for use in a wide variety of settings including musical venues, theatres, houses of worship, schools, corporate conference rooms, and more. Adding an additional U4T to an existing system allows you to send a separate monitor mix to different performers you could send a monitor blend with more vocals to the singer for example.
The portable easy-to-use U4T features a tough molded-plastic and cast-metal chassis, built to handle the rigors of touring and is powered by an internal, unreplaceable battery that offer 5 hours of operating time. The battery is recharged via a USB port. The transmitter works with basically any mixer or other device that has an available balanced XLR or unbalanced 1/4 output jack. Just plug the transmitter in, and it will broadcast the incoming audio to any of its six selectable 2.4 GHz channels. Simply set the separately available bodypack receivers to the same channel and you re good to go. The system provides a 90 line-of-sight transmission range with only a 5 ms latency, low enough for musical applications.
Easy to Use, Flexible, Expandable
- Plug-on transmitter designed for use with up to six U4R receivers (available separately) to provide a hands-free in-ear monitoring system for performers
- Simple to use: plug in the transmitter and set the transmitter and receiver to the same channel-that s it
- 2.4 GHz system works anywhere in the world-ready to go where the tour goes
- System offers 6 wireless channels to choose from, allowing you to expand with additional transmitters (available separately) and send different monitor mixes specifically tailored to the needs of your performers
Digital Sound Quality, Wireless Convenience
- U4T offers 24-bit / 48 kHz digital audio with a 107 dB dynamic range and a 20 Hz to 20 kHz frequency range
- 90 line-of-sight transmission range with only 5 ms latency
- Built-in rechargeable battery powers transmitter for 5 hours, fully recharges in 2.5 hours
- Plugs directly into XLR out on mixer
- Includes adapter for use with 1/4 TS mixer output
Versatile Input Modes
- Line mode: Use with mixers or other professional audio devices that send line-level signals
- Aux mode: Use when connecting consumer audio devices such as portable audio players or computers
Xvive Audio U4T Specs
Tuning Bandwidth | 2400 to 2483.5 MHz |
Working Range | Up to 90` (Actual Range Depends on Rf Signal Absorption, Reflection, and Interference) |
Audio Frequency Response | 20 Hz to 20 KHz (-3 dB) |
Dynamic Range | 107 dB |
RF Sensitivity | -88 dBm |
Total Harmonic Distortion | 0.2% |
RF Output Power | 10 mW EIRP Max |
Operating Temperature Range | 0 to 135° F / -18 to 57° C (Battery Characteristics May Limit this Range) |
Channels | 6 |
Latency | Less than 5 ms |
Audio Resolution | 24-bit / 48 kHz |
Impedance | 47 Kilohms |
Audio Input Connectors | Balanced XLR Male |
Audio Input Levels | Aux Mode: -10 dBV, Maximum +12.2 dBu Line Mode: +4 dBu, Maximum +22 dBu |
Antenna Impedance | 50 Ohms |
Antenna Type | 1/4 Wave Sleeve Dipole, Nonremovable |
Batteries | Transmitter: 3.7 V Rechargeable Li-Ion, 860 mAh |
Battery Life | 5 Hours |
Charging Time | 2.5 Hours for Full Charge (Useable While Charging) |
Dimensions | Transmitter: 1.2 x 1.1 x 3.9" / 3.0 x 2.8 x 10.0 cm |
Weight | Transmitter: 3.2 oz / 90 g |
Packaging Info
Package Weight | 0.585 lb |
Box Dimensions (LxWxH) | 5.35 x 3.55 x 2.7" |
In the Box
- Xvive Audio U4T Plug-On Wireless Transmitter for In-Ear Monitor System (2.4 GHz)
- 1/4" to XLR Adapter
- 2-Year Manufacturer Warranty
No posts found