Bogen AFI-8 Contractor Series Wide-Angled Loudspeaker System (White)
The white AFI-8 Contractor Series Wide-Angled Loudspeaker System from Bogen Communications is capable of filling large churches, theaters, sports venues, and theme parks with clean, articulate, full bandwidth sound. This loudspeaker system is available with a 90 x 40° high-frequency horn pattern, insuring that the AFI-8 works efficiently in any room configuration.
Low Frequency
One Apogee 15 (381mm) permanent magnet conetype driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters also treated with Ferrofluid for greater power handling capability, lower distortion, and control of short-term impedance rise
High Frequency
One Apogee 3 (76mm) voice coil, 2 (51mm) exit horn-loaded compression driver treated with Ferrofluid for efficient power handling capability, lower distortion, and control of shortterm impedance rise
Input Connectors
Barrier strip, screw type #8
Compatible Processors
AFI Main Frame Controller Chassis or DLC24
Handles
Two handles - one top, one bottom - designed as an integral part of the enclosure (no moving parts)
Grille
Highly durable, quality finish on perforated steel
Rigging Hardware
Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel points can be type 3/8 -16 or M10 thread
Finish
Textured high-strength white epoxy paint
Enclosure Type
30° trapezoidal, optimally-vented bass
Cabinet Construction
Multi-ply hardwood
The white AFI-8 Contractor Series Wide-Angled Loudspeaker System from Bogen Communications is capable of filling large churches, theaters, sports venues, and theme parks with clean, articulate, full bandwidth sound. This loudspeaker system is available with a 90 x 40° high-frequency horn pattern, insuring that the AFI-8 works efficiently in any room configuration.
Low Frequency
One Apogee 15 (381mm) permanent magnet conetype driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters also treated with Ferrofluid for greater power handling capability, lower distortion, and control of short-term impedance rise
High Frequency
One Apogee 3 (76mm) voice coil, 2 (51mm) exit horn-loaded compression driver treated with Ferrofluid for efficient power handling capability, lower distortion, and control of shortterm impedance rise
Input Connectors
Barrier strip, screw type #8
Compatible Processors
AFI Main Frame Controller Chassis or DLC24
Handles
Two handles - one top, one bottom - designed as an integral part of the enclosure (no moving parts)
Grille
Highly durable, quality finish on perforated steel
Rigging Hardware
Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel points can be type 3/8 -16 or M10 thread
Finish
Textured high-strength white epoxy paint
Enclosure Type
30° trapezoidal, optimally-vented bass
Cabinet Construction
Multi-ply hardwood
Bogen AFI-8 Specs
| Configuration | Passive Two-way |
| Dispersion | 90 x 40° |
| Frequency Response | At 1 m on axis: 46 Hz to 20 kHz ± 3 dB |
| Maximum SPL | At 1 m: 124 dB continuous/130 dB peak |
| PTML (Peak Transient Mechanical Limit) | 141 dB |
| Sensitivity | At 1W @ 1 m: 98 dB SPL/100 Hz to 4 kHz |
| Nominal Impedance | 8 ©, each driver |
| Maximum Power Handling | 400 W continuous/1600 W peak |
| Dimensions | Front: 20.25 x 30.25 x 15.1" (515 x 769 x 384 mm) Rear: 13.3 x 30.25 x 15.1" (338 x 769 x 384 mm) |
| Weight | 77 lb (35 kg) |
In the Box
- Bogen AFI-8 Contractor Series Wide-Angled Loudspeaker System (White)
- 2-Year Manufacturer Warranty
No posts found
