Electro-Voice EVF-1122D Overview
The black EVF-1122D Single 12 2-Way Full-Range Outdoor Loudspeaker System from Electro-Voice is can be used in a variety of applications where high-quality sound reinforcement is required. It utilizes the high-output DH7N 3 titanium compression driver, coupled with a constant directivity 90° x 90° waveguide. The DVX3121A 12 woofer was developed using FEA optimization for motor, suspension, and electrical design to ensure very low distortion, high efficiency, and maximum intelligibility at high SPL. The crossover uses steep, 24-dB-per-octave slopes with equalization for smooth response in the vocal range, linear off-axis response, and a protection circuit for long-term reliability.
The trapezoidal enclosure is constructed of weather-resistant birch, and coated with fiberglass for maximum protection from extreme outdoor elements. The acoustic and rigging design allows for vertical and horizontal clusters to be built using any combination of loudspeakers from the entire EVF and EVH series. The input panel features a dual 4-pin 10 AWG Phoenix-style connector and includes a gland-nut cover plate. An externally accessible jumper selects passive or active operation.
- DH7N 3 diaphragm, 1.4 exit pure titanium compression driver
- DVX3121A 12 LF transducer with fully symmetric drive
- Advanced fourth-order crossover network with HF protection
- Coverage pattern of 90° x 90° constant directivity 12 rotatable waveguide
- 97 dB sensitivity, 131 dB maximum SPL
- 22 x M10 threaded suspension points
- Comes with a Phoenix-style connector and includes CDG dual-gland-nut input panel cover plate for weatherizing
EAN: 701001114504
Electro-Voice EVF-1122D Specs
| Frequency Response | -3 dB: 118 Hz to 18 kHz |
| Frequency Range | -10 dB: 66 Hz to 21 kHz |
| Coverage | Rotatable: 90° x 90° |
| Frequency | Receiver High Pass: 65 Hz |
| Passive Crossover Frequency | 1300 Hz |
| Axial Sensitivity | 97 dB (1 W @ 3.28` / 1 m) LF Transducer - DVX3121A: 98 dB (1 W @ 3.28` / 1 m) HF Transducer - DH7N: 112 dB (1 W @ 3.28` / 1 m) |
| SPL | Maximum Calculated: 131 dB LF Transducer - DVX3121A: 131 dB HF Transducer - DH7N: 137 dB |
| Power Handling | Passive: 600 W continuous, 2400 W peak LF Transducer - DVX3151A: 500 W continuous, 2000 W peak HF Transducer - DH7N: 75 W continuous, 300 W peak |
| Impedance | 8 Ohms (nominal), 6 Ohms (minimum) LF Transducer - DVX3151A: 8 Ohms (nominal), 7.2 Ohms (minimal) HF Transducer - DH7N: 8 Ohms (nominal), 6 Ohms (minimal) |
| Connectors | Dual 4-pin 10 AWG Phoenix/Euro Block screw-terminals CDG dual-gland-nut input panel cover plate (included) |
| Enclosure | 13-ply birch weather-resistant fiberglass finished (IP55-rated) |
| Grille | 18 GA stainless steel with hydrophobic cloth |
| Suspension | 22 x M10 threaded suspension points |
| Dimensions | 30.26 x 16.00 x 16.27" (768.6 x 406.3 x 413.3 mm) |
| Weight | 65.5 lb (29.7 kg) |
Packaging Info
| Package Weight | 82.5 lb |
| Box Dimensions (LxWxH) | 31.5 x 22.5 x 21" |
In the Box
- Electro-Voice EVF-1122D Single 12" 2-Way Full-Range Outdoor Loudspeaker System (Weather-Resistant Fiberglass-Finish, Black)
- CDG Dual-Gland-Nut Input Panel Cover
- 3-Year Manufacturer Warranty
No posts found
