Electro-Voice EVF-1122D Overview
The black EVF-1122D Single 12" 2-Way Full-Range Semi-Outdoor Loudspeaker System from Electro-Voice can be used in a variety of applications where high-quality sound reinforcement is required. It utilizes the high-output DH7N 3" titanium compression driver, coupled with a constant directivity 90° x 60° waveguide. The DVX3121A 12" woofer was developed using FEA optimization for motor, suspension, and electrical design to ensure very low distortion, high efficiency, and maximum intelligibility at high SPL. The crossover uses steep, 24-dB-per-octave slopes with equalization for smooth response in the vocal range, linear off-axis response, and a protection circuit for long-term reliability.
The trapezoidal enclosure of the loudspeaker is constructed of 13-ply birch, and coated with EVCoat for maximum protection from external elements. This PI-weatherized loudspeaker system is rated for outdoor exposure only in protected areas such as under a roof overhang. The acoustic and rigging design allows for vertical and horizontal clusters to be built using any combination of loudspeakers from the entire EVF and EVH Series. The enclosure features a stainless steel grille with hydrophobic cloth. The input panel includes CDG dual-gland-nut input panel cover. An externally accessible jumper selects passive or active operation.
- DH7N 3 diaphragm, 1.4 exit pure titanium compression driver
- DVX3121A 12 LF transducer with fully symmetric drive
- Advanced fourth-order crossover network with HF protection
- Coverage pattern of 90° x 60° constant directivity 12 rotatable waveguide
- 97 dB sensitivity, 131 dB maximum SPL
- 22 x M10 threaded suspension points
- Gland nut and stainless-steel grille
EAN: 701001114412
Electro-Voice EVF-1122D Specs
| Frequency Response | -3 dB: 57 Hz to 18 kHz |
| Frequency Range | -10 dB: 49 Hz to 21 kHz |
| Coverage | Rotatable: 90° x 60° |
| Frequency | Receiver High Pass: 65 Hz |
| Passive Crossover Frequency | 1300 Hz |
| Axial Sensitivity | 97 dB (1 W @ 3.28` / 1 m) LF Transducer - DVX3121A: 98 dB (1 W @ 3.28` / 1 m) HF Transducer - DH7N: 112 dB (1 W @ 3.28` / 1 m) |
| SPL | Maximum Calculated: 131 dB LF Transducer - DVX3121A: 131 dB HF Transducer - DH7N: 137 dB |
| Power Handling | Passive: 600 W continuous, 2400 W peak LF Transducer - DVX3151A: 500 W continuous, 2000 W peak HF Transducer - DH7N: 75 W continuous, 300 W peak |
| Impedance | 8 Ohms (nominal), 6 Ohms (minimum) LF Transducer - DVX3151A: 8 Ohms (nominal), 7.2 Ohms (minimal) HF Transducer - DH7N: 8 Ohms (nominal), 6 Ohms (minimal) |
| Connectors | Dual four-pin 10 AWG Phoenix/Euro Block screw-terminals CDG dual-gland-nut input panel cover plate (included) |
| Enclosure | 13-ply weather-resistant birch with EVCoat |
| Grille | Stainless steel with hydrophobic cloth |
| Suspension | 22 x M10 threaded suspension points |
| Dimensions | 30.26 x 16.00 x 16.27" (768.6 x 406.3 x 413.3 mm) |
| Weight | 65.5 lb (29.7 kg) |
In the Box
- Electro-Voice EVF-1122D Single 12" 2-Way Full-Range Semi-Outdoor Loudspeaker System (Weather-Resistant PI-Finish, Black)
- CDG Dual-Gland-Nut Input Panel Cover Plate
- 3-Year Manufacturer Warranty
No posts found
