Electro-Voice EVF-1152D Overview
The white EVF-1152D Single 15" 2-Way Full-Range Outdoor Loudspeaker System from Electro-Voice is a high-power, 2-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required. It utilizes the DH7N 3 titanium compression driver, coupled to a Constant Directivity 40 x 30° waveguide. The system also uses DVX3151A 15 woofer, developed using FEA optimization for motor, suspension, and electrical design to ensure very low distortion, high efficiency, and maximum intelligibility at high SPL. The crossover uses steep, 24 dB per octave slopes with equalization for very smooth response in the vocal range, linear off-axis response, and a protection circuit for long-term reliability.
The trapezoidal enclosure is constructed of weather-resistant birch, and coated with fiberglass for maximum protection from extreme outdoor elements. Thanks to the fiberglass finish and IP55 rating, this loudspeaker can be used in harsh environments. The acoustic and rigging design allows for vertical and horizontal clusters to be built using any combination of loudspeakers from the entire EVF and EVH series. A 70.7/100V transformer kit can be easily mounted to the input panel for use in distributed systems.
The system offers 7 horn patterns with an assortment of low-frequency and subwoofer loudspeakers to maximize flexibility of system design as per your requirements. The input panel features a Phoenix-style connector and CDG dual-gland-nut input panel cover. In addition, an externally accessible jumper selects passive or active operation.
DH7N 3" diaphragm and 1.4" exit pure titanium compression driver
DVX3151A 15" LF transducer with a fully symmetric drive
Comes with a Phoenix-style connector and CDG dual-gland-nut input panel cover
Fourth-order crossover network with HF protection
Coverage pattern of 40 x 30° and Constant Directivity 12" rotatable waveguide
100 dB sensitivity and 134 dB maximum SPL
Twenty-two M10 threaded suspension points
EAN: 701001114658
Electro-Voice EVF-1152D Specs
| Frequency Response | -3 dB: 107 Hz to 18 kHz |
| Frequency Range | -10 dB: 58 Hz to 21 kHz |
| Coverage | Rotatable: 40 x 30° |
| Frequency | Receiver High Pass: 55 Hz |
| Passive Crossover Frequency | 1300 Hz |
| Axial Sensitivity | 100 dB (1 W @ 3.28` / 1 m) LF Transducer - DVX3151A: 100 dB (1 W @ 3.28` / 1 m) HF Transducer - DH7N: 114 dB (1 W @ 3.28` / 1 m) |
| SPL | Maximum Calculated: 134 dB LF Transducer - DVX3151A: 133 dB HF Transducer - DH7N: 139 dB |
| Power Handling | Passive: 600 W Continuous, 2400 W Peak LF Transducer - DVX3151A: 500 W Continuous, 2000 W Peak HF Transducer - DH7N: 75 W Continuous, 300 W Peak |
| Impedance | 8 Ohms (Nominal), 6 Ohms (Minimum) LF Transducer - DVX3151A: 8 Ohms (Nominal), 7.2 Ohms (Minimal) HF Transducer - DH7N: 8 Ohms (Nominal), 6 Ohms (Minimal) |
| Connectors | Dual Four-Pin 10 AWG Phoenix/Euro Block Screw-Terminals CDG Dual-Gland-Nut Input Panel Cover |
| Enclosure | 13-Ply Weather-Resistant Birch with Fiberglass Finish |
| Grille | 18 GA Stainless Steel with Hydrophobic Cloth |
| Environmental | IEC 60529 IP55 |
| Suspension | 22 x M10 Threaded Suspension Points |
| Dimensions | 30.26 x 18.5 x 18.37" / 768.6 x 469.8 x 466.6 mm |
| Weight | 75.7 lb / 34.4 kg |
In the Box
- Electro-Voice EVF-1152D Single 15" 2-Way Full-Range Outdoor Loudspeaker System (Fiberglass, 40 x 30°, White)
- CDG Dual-Gland-Nut Input Panel Cover
- 3-Year Manufacturer Warranty
No posts found
