Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
- 2x LD Systems Stinger Sub 18A G3
- 2x LD Systems Stinger 28A G3
- 2x Sommer Cable Monolith1 Power Twist/XLR 2,5m
- 2x LD Systems Stinger 28 G3 PC
- 2x LD Systems Stinger Sub 18 G3 PC
- Roadworx Slim Line Speaker Stand Bag
- 2x Roadworx Multi Pole
- Active Subwoofer
- Active bass reflex subwoofer with 18" speaker
- Integrated DSP
- Integrated Class-D power amp
- Power: 800 W RMS, 1600 W Peak
- Max. SPL (sound pressure level): 135 dB
- Frequency range: 35 - 200 Hz
- Integrated DSP with the following protected circuit designs: limiter, overheating, overvoltage, overcurrent
- Switchable high cut at 80 Hz, 100 Hz and 120 Hz
- Switchable cardioid mode
- Connection panel with 2x mic/line combo inputs, 2x XLR outputs, PowerTwist input and output
- 18 mm Plywood housing
- Pole mounts with M20 threads
- Dimensions: 677 x 547 x 740 mm
- Weight: 42.6 kg
- Suitable protective cover available under Article Nr 409338 (not included)
- Suitable caster board available under Article Nr 409340 (not included)
- Active Full-Range Speaker
- With bass reflex housing
- Equipped with: 2x 8" Speakers
- Integrated DSP
- Integrated Class D power amplifier
- Power: 500 W RMS, 1000 W peak
- Maximum SPL: 131 dB
- Frequency range: 58 - 20,000 Hz
- Integrated DSP with the following protection circuits: Multiband limiter, overheating, overvoltage, overcurrent
- Switchable operating modes: Full range, satellite, monitor, flat
- BMS tweeter
- Coverage pattern (H x V): 90° x 50° degrees
- Connection panel with 2x Mic / Line combo input, 1x XLR out and Power Twist power connection
- Plywood housing
- 36 mm dual tilt stand flange
- M10 Rigging points
- Dimensions: 270 x 756 x 290 mm
- Weight: 20.5 kg
- Audio/Power Combination Line
- With 3x 1.5 mm² mains cable with PowerTwist-male to -socket and a balanced NF-line (3-pin/110Ω-capable)
- XLR male + PowerTwist to XLR female + PowerTwist
- Ideal for audio signals and power over cable
- Very flexible and enormously tread-resistant due to the round jacket made of cotton and viscose
- Good pairwise shielding through tinned copper spiral braiding
- Length: 2.5 m
- Sheath material; PVC
- Diameter: 14.5mm
- Number of inner conductors: 2 x 0.25 mm²
- Diameter power line: 7.0mm
- Diameter signal line: 3.8mm
- Copper braid per conductor (power supply): 56 x 0.15 mm²
- Copper braid per conductor (signal): 28 x 0.10 mm²
- Shielding signal: Cross braided
- Shielding factor (audio): 90"
- Temperature range: -30°C to +70°C
- Fire load per m: 0.64 KWh
- Weight per 1m: 222 g
- Sheath colour: Black
- Protective Cover
- For the LD Systems Stinger 2 x 8" G3
- Material: Nylon
- 8 mm Padding
- Reinforced grip recesses
- Practical inner pocket for accessories
- Dimensions (H x W x D): 290 x 750 x 310 mm
- Weight: 0.7 kg
- Colour: Black
- Nylon Protective Cover
- Suitable for Stinger Sub 18" G3
- 8 mm Padding
- Dimensions (W x H x D): 576 x 470 x 625 mm
- Weight: 1.5 kg
- Colour: Black
- Bag
- For 2 Roadworx Slim Line Speaker stands
- With foam padding
- Outer material: Cordura - robust, wear-resistant, water-repellent nylon
- 2 Handles
- Support feet made from plastic
- Outer dimensions (L x W x H): 1000 x 200 x 150 mm
- Inner dimensions (L x W x H): 940 x 165 x 85 mm
- Weight: 0.85 kg
- Colour: Black
- Distance rod
- Length approx. 0.88 m to 1.36 m
- Height adjustment with safety splint
- Upper end: 35 mm
- Lower end suitable for 35 mm and M20 mountings
- Weight: 1.2 kg
- Colour: Black
3-Year Warranty
| more than 150 people Yes | |
| more than 300 people No | Incl. Mixer Yes |
| Incl. Subwoofer Yes | Active Speaker Yes |
| Line Array / Column No |
No posts found
