LD Systems ANNY 10 Overview
For musical performances, special events, presentations, fitness instruction, and more, the ANNY 10 Battery-Powered Bluetooth 10" PA Speaker from LD Systems delivers versatility and power in a portable package that anyone can use. The two-way speaker system consists of a 10" woofer and a 1" driver powered by 80W of Class-D amplification with DynX DSP (Gen 2) technology to deliver clear, impactful sound that won't distort even with the volume fully cranked. The included rechargeable battery powers the ANNY 10 for between 5 and 25 hours depending on use, while the built-in luggage handle and rolling wheels ensure the system is ready for the road.
Two slots are available to accommodate UHF receivers for use with wireless microphones (receivers and mics available separately). Additional input sources include two XLR-1/4" combo jacks that are switchable for mic or line level, a single 3.5mm jack, and two RCA inputs, and wireless streaming via Bluetooth. The 6-channel onboard mixer with LCD screen offers per-channel volume controls, 3-band EQ, echo, reverb, and master volume. On the top, there is a handy storage compartment for mobile devices. The ANNY 10's polypropylene cabinet is durable, lightweight, and stand mountable.
- Portable active 2-way full-range loudspeaker
- Built-in 6-channel mixer with 3-band EQ, reverb, and delay
- Long battery life: Up to 25 hours in ECO mode and 5 hours at maximum volume
- Bluetooth 5.0 and stereo streaming (TWS) with two ANNYs
- Clear and distortion-free sound at maximum volume through DynX DSP (Gen 2)
- 2 microphone/line inputs for versatile connection options
- 2 receiver module slots for adding optional ANNY wireless receivers and microphones
- Priority/ducking mode to emphasize the microphone signal
- Wheels and telescopic handle for easy transport
- 35mm flange for use with a speaker stand
- USB-C port for charging a tablet or smartphone
- Footswitch input for hands-free effect control
- Integrated holder for tablet or smartphone
LD Systems ANNY 10 Specs
Key Specs
| Speaker Configuration | 1x 2-Way Loudspeaker |
| Number of Input Channels | 6 (2 x Mono, 2 x Stereo) |
| Amplifier Power Rating | Total: 1x 80 W RMS |
| HF Driver | 1x 1" / 25 mm |
| LF Driver | 1x 10" / 254 mm |
| Audio I/O | 2x Combo XLR-1/4" TRS Mic/Line Input 2x RCA Coaxial Line Input 1x 1/8" / 3.5 mm TRS Aux Input 1x XLR 3-Pin Male Mix Output |
| USB I/O | 1x USB-C (Device Charging) |
| Bluetooth | 5.0 |
Portable PA System
| Speaker Configuration | 1x 2-Way Loudspeaker |
| Number of Input Channels | 6 (2 x Mono, 2 x Stereo) |
| Amplifier Power Rating | Total: 1x 80 W RMS |
| Amplifier Class | Class-D |
Speakers
| Enclosure Type | Speaker: Bass-Reflex |
| HF Driver | 1x 1" / 25 mm |
| HF Voice Coil | 1" / 25 mm |
| LF Driver | 1x 10" / 254 mm |
| LF Voice Coil | 2" / 51 mm |
| Magnet | Ferrite |
| Speaker Sensitivity | 111 dB SPL (Typical) 118 dB SPL (Max) |
Signal Processing
| Crossover | 1800 Hz |
| Input Pad | No |
| EQ | 3-Band Graphic |
| Semi-Parametric EQ | No |
| Effects | Delay Reverb |
| Filters | No |
| Dynamic Processing | No |
Performance
| Frequency Response | 45 Hz to 20 kHz |
| Maximum SPL | 118 dB SPL (Peak) 111 dB SPL (Continuous) |
| Coverage Angle | 90° H x 50° V |
Connectivity
| Audio I/O | 2x Combo XLR-1/4" TRS Mic/Line Input 2x RCA Coaxial Line Input 1x 1/8" / 3.5 mm TRS Aux Input 1x XLR 3-Pin Male Mix Output |
| USB I/O | 1x USB-C (Device Charging) |
| Mobile App Compatible | No |
| Network I/O | No |
| Wireless Connectivity | Bluetooth |
| Max Wireless Range | 262.5' / 80 m |
| RF Frequency Band | Handheld Transmitter: 470 to 490 MHz |
| Bluetooth | 5.0 |
| Transmitter Power | 10 mW |
Power
| Battery Type | System: Rechargeable 12 V Lead-Acid (Replaceable) |
| Approximate Battery Life | 5 to 25 Hours |
| Battery Charging Time | 7 Hours |
| Internal Battery Capacity | System: 5 Ah |
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz (T 2 A L 250 V) |
| Power Consumption | 150 W |
| AC Power I/O | 1x IEC Input |
Physical
| Transport Options | 1x Telescopic Handle 2x Wheels |
| Mounting | 1 x 1.4" / 35 mm Pole Socket |
| Construction Material | Polypropylene |
| Environmental Protection | No |
| Operating Temperature | 32 to 104°F / 0 to 40°C |
| Operating Humidity | 80% |
| Dimensions | 22.3 x 14.2 x 11.8" / 566 x 361 x 300 mm |
| Weight | 40.17 lb / 18.22 kg |
In the Box
- LD Systems ANNY 10 Battery-Powered Bluetooth 10" PA Speaker
- 2-Year Manufacturer Warranty
No posts found
