LD Systems ANNY 10 Overview
For musical performances, special events, presentations, fitness instruction, and more, the ANNY 10 HHD Battery-Powered Bluetooth PA Speaker with 1 Handheld Microphone from LD Systems delivers versatility and power in a portable package that anyone can use. The two-way speaker system consists of a 10" woofer and a 1" driver, driven by 80W of Class-D amplification with DynX DSP (Gen 2) technology, to deliver clear and powerful sound that won't distort-even with the volume fully cranked. An onboard rechargeable battery powers the ANNY 10 for between 5 and 25 hours, dependent on use, while the built-in luggage handle and rolling wheels ensure the system is ready for the road.
This configuration includes one wireless handheld microphone and one UHF receiver, forming a reliable wireless system that operates in the 470 to 490 MHz frequency band. Additional input sources include two XLR-1/4" combo jacks that are switchable for mic or line level, a single 3.5mm jack, and two RCA inputs, along with wireless streaming via Bluetooth. The 6-channel onboard mixer with LCD screen offers per-channel volume controls, 3-band EQ, echo, reverb, and master volume. On the top, there is a handy storage compartment for mobile devices. The ANNY 10's polypropylene cabinet is durable, lightweight, and stand-mountable.
Features at a Glance
- Portable active 2-way full-range loudspeaker
- Built-in 6-channel mixer with 3-band EQ, reverb, and delay
- Long battery life: up to 25 hours in ECO mode and 5 hours at maximum volume
- 1 wireless handheld microphone with supplied AA batteries
- Bluetooth 5.0 and stereo streaming (TWS) with two ANNYs
- Clear and distortion-free sound at maximum volume through DynX DSP (Gen 2)
- 2 microphone/line inputs for versatile connection options
- 1 stereo channel with 3.5mm jack (aux) or RCA
- 1 receiver module slot for adding an additional ANNY wireless microphone
- Priority/ducking mode to emphasise the microphone signal
- Wheels and telescopic handle for easy transport
- 35mm flange for use with a speaker stand
- USB-C port for charging a tablet or smartphone
- Footswitch input for hands-free effect control
- Integrated holder for tablet or smartphone
- 80W RMS / 160W peak with a max. SPL of 118 dB
LD Systems ANNY 10 Specs
Key Specs
| Speaker Configuration | 1x 2-Way Loudspeaker |
| Number of Input Channels | 6 (2 x Mono, 2 x Stereo) |
| Amplifier Power Rating | Total: 1x 80 W RMS |
| HF Driver | 1x 1" / 25 mm |
| LF Driver | 1x 10" / 25.4 cm |
| Microphone Type | 1x Handheld |
| Audio I/O | 2x Combo XLR-1/4" TRS Mic/Line Input 2x RCA Coaxial Line Input 1x 1/8" / 3.5 mm TRS Aux Input 1x XLR 3-Pin Mix Output |
| USB I/O | 1x USB-C (Device Charging) |
| Wireless Transmission | Handheld Transmitter: UHF |
| Bluetooth | 5.0 |
Portable PA System
| Speaker Configuration | 1x 2-Way Loudspeaker |
| Number of Input Channels | 6 (2 x Mono, 2 x Stereo) |
| Amplifier Power Rating | Total: 1x 80 W RMS |
| Amplifier Class | Class-D |
Speakers
| Enclosure Type | Speaker: Bass-Reflex |
| HF Driver | 1x 1" / 25 mm |
| HF Voice Coil | 1" / 25 mm |
| LF Driver | 1x 10" / 25.4 cm |
| LF Voice Coil | 2" / 51 mm |
| Magnet | Ferrite |
| Speaker Sensitivity | 111 dB SPL (Typical) 118 dB SPL (Max) |
Signal Processing
| Crossover | 1800 Hz |
| Input Pad | No |
| EQ | 3-Band Graphic |
| Semi-Parametric EQ | No |
| Effects | Delay Reverb |
| Filters | No |
| Dynamic Processing | No |
Microphone
| Microphone Type | 1x Handheld |
| Capsule | Dynamic |
| Polar Pattern | Cardioid |
| Muting | Off/On Switch |
Performance
| Frequency Response | 45 Hz to 20 kHz |
| Maximum SPL | 118 dB SPL (Peak) 111 dB SPL (Continuous) |
| Coverage Angle | 90° H x 50° V |
Connectivity
| Audio I/O | 2x Combo XLR-1/4" TRS Mic/Line Input 2x RCA Coaxial Line Input 1x 1/8" / 3.5 mm TRS Aux Input 1x XLR 3-Pin Mix Output |
| USB I/O | 1x USB-C (Device Charging) |
| Mobile App Compatible | No |
| Network I/O | No |
| Wireless Connectivity | Bluetooth |
Wireless
| Wireless Transmission | Handheld Transmitter: UHF |
| Max Wireless Range | 262.5' / 80 m |
| Number of RF Channels | 12 |
| RF Frequency Band | Handheld Transmitter: 470 to 490 MHz |
| RF Bandwidth | 20 MHz |
| Form Factor | Transmitter: 1x Handheld |
| RF Output Power | 10 mW |
| Max Number of Simultaneous Transmitters | 2 |
| Diversity | Non-Diversity |
| Antenna | 1x Built-In |
| Bluetooth | 5.0 |
| Transmitter Power | 10 mW |
Power
| Battery Type | System: Rechargeable 12 V Lead-Acid (Replaceable) Handheld Transmitter: 2x AA |
| Approximate Battery Life | 5 to 25 Hours |
| Battery Charging Time | 7 Hours |
| Internal Battery Capacity | System: 5 Ah |
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz (T 2 A L 250 V) |
| Power Consumption | 150 W |
| AC Power I/O | 1x IEC Input |
Physical
| Transport Options | 1x Telescopic Handle 2x Wheels |
| Mounting | 1 x 1.4" / 35 mm Pole Socket |
| Construction Material | Polypropylene |
| Environmental Protection | No |
| Operating Temperature | 32 to 104°F / 0 to 40°C |
| Operating Humidity | 80% |
| Weight | 41.27 lb / 18.72 kg |
In the Box
- LD Systems ANNY 10 HHD Battery-Powered Bluetooth 10" PA Speaker with 1 Handheld Microphone (B47: 470 to 490 MHz)
- 2 x AA Battery
- 2-Year Manufacturer Warranty
No posts found
