For special events, presentations, fitness instruction, and more, the LD Systems Roadbuddy 10 HS Battery-Powered Bluetooth Speaker with Bodypack and Headset Microphone delivers versatility and power in a portable package. The two-way speaker system consists of a 10 custom woofer and a 1 horn-loaded compression driver driven by 480W of Class-D amplification. With powering methods including an internal 8-hour rechargeable battery and an efficient switching power supply, the Roadbuddy 10 HS is ready for the road.
The Roadbuddy 10 HS features a headset microphone, a wireless bodypack transmitter, and a built-in UHF receiver, forming a reliable wireless system that operates in the 584 to 607 MHz frequency band. The integrated media player incorporates a backlit multifunction display, mode and transport buttons, and support for an array of music sources such as 3.5mm or RCA inputs, wireless streaming via Bluetooth, an SD card, or a USB flash drive. The included IR remote control provides comprehensive access to volume, EQ, track selection, and more. The onboard mixer also offers two XLR-1/4 combo jacks that are switchable for mic or line level, per-channel volume controls, 2-band EQ, echo, and master volume. The Roadbuddy 10 HS is easily transportable, thanks to built-in caster wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two handheld microphones. The Roadbuddy s polypropylene cabinet is durable, lightweight, and stand mountable.
10 custom woofer and 1 horn-loaded compression driver yield a frequency response of 55 Hz to 18 kHz
Class-D amplification (480W peak / 120W RMS) drives the speaker components to a maximum SPL of 115 dB
Accepts mic-/line-level sources via XLR-1/4 combo jacks, and stereo music playback devices via 3.5mm and RCA aux inputs
1/4 line output for connection to a main PA or secondary powered speaker
Pre-installed UHF receiver with channel selection, AF/RF indicators, adjustable volume, and mute level
Install a second UHF receiver (available separately) to allow simultaneous use of two wireless microphones
Wireless bodypack transmitter—powered via two AA batteries (available separately)—with on/off switch, adjustable input sensitivity, and 3-pin mini-XLR input
Supports powering via AC connection or internal battery
LED indicators for battery level and charging status
LD Systems Roadbuddy 10 HS B5 Specs
Portable PA System
| Speaker Configuration | 1 x 2-Way Loudspeaker |
| Number of Input Channels | 3 (2 x Mono, 1 x Stereo) |
| Amplifier Power Rating | 120 W RMS 480 W Peak |
| Amplifier Class | Class-D |
Speakers
| Enclosure Type | Bass-Reflex |
| HF Driver | 1" / 2.5 cm Horn-Loaded Compression Driver |
| LF Driver | 10" / 25.4 cm Woofer |
| Magnet | Ferrite |
| Speaker Sensitivity | 96 dB |
Signal Processing
| EQ | HF Shelf LF Shelf |
| Effects | Echo (Type Unspecified) |
Microphone
| Form Factor | Headworn |
| Outputs | TA3/Mini XLR Female |
Performance
| Frequency Response | Wireless: 50 Hz to 17 kHz Speaker: 55 Hz to 18 kHz |
| Maximum SPL | 115 dB |
| THD | 0.002% |
| Protections | Overcurrent, Short Circuit |
Connectivity
| Audio I/O | 1 x 1/4" TS Unbalanced Line Output 2 x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Line Input 1 x 1/8" / 3.5 mm TRS Unbalanced Line Input 1 x Stereo RCA Line Input |
| USB | USB-A (Media Playback) |
| Media Playback | 1 x SD |
| Media & File Formats Supported | MP3, WAV, WMA |
Wireless
| Wireless Transmission | Bodypack Transmitter: Analog UHF |
| Max Wireless Range | Bluetooth: 32.8` / 10 m |
| Number of RF Channels | 16 |
| RF Frequency Band | 584 to 607 MHz |
| Form Factor | Transmitter: 1 x Bodypack |
| RF Output Power | 10 mW |
| Transmitter I/O | 1 x TA3/Mini XLR 3-Pin Male Input |
| Antenna | Receiver: TNC (Rear-Mount) |
| Modulation | FM |
| Pairing | Manual |
Power
| Battery Type | System: 2 x Rechargeable 12 V Lead-Acid Bodypack Transmitter: 2 x AA (Not Included) |
| Approximate Battery Life | 8 Hours |
| Battery Charging Time | 10 Hours |
| Internal Battery Capacity | 5 Ah |
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
| AC Power I/O | 1 x IEC Input |
Physical
| Transport Options | 2 x Wheels (Bottom) 1 x Telescopic Handle (Top) 1 x Handle (Top) |
| Mounting | 1.4" / 35.56 mm Pole Socket |
| Construction Material | ABS, Polypropylene |
| Environmental Protection | None |
| Operating Temperature | 32 to 82°F / 0 to 50°C |
| Operating Humidity | 10 to 70% (Recommended) |
| Dimensions | 20.67 x 16.34 x 12.91" / 525 x 415 x 328 mm |
| Weight | Bodypack Transmitter: 2.82 oz / 0.08 kg (without Batteries) System: 36.4 lb / 16.5 kg |
Packaging Info
| Package Weight | 42.895 lb |
| Box Dimensions (LxWxH) | 25.4 x 17 x 15.6" |
In the Box
- LD Systems Roadbuddy 10 HS B5 Battery-Powered Bluetooth 10" Speaker with Bodypack and Headset Microphone
- 2-Year Manufacturer Warranty
No posts found
