Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
ART SLA-2-F 2-Channel Studio Linear Power Amplifier (230V)
EAN: 840402021506
The SLA-2-F from ART is a rack mountable two-channel power amplifier designed for studio use. It offers a wide frequency response with very low noise and distortion for quality audio output. XLR, 1/4`, and Euroblock input connectors are provided, along with five-way binding post outputs. Each channel has its own level control on the front panel.
The SLA-2-F can operate in stereo or bridged mode, and features a ground-lift switch to eliminate hum caused by ground loops. The unit offers full protection circuitry for short circuits, overloads, and overheating. If any faults are detected, the amplifier will disconnect the outputs and automatically return to normal operation when the fault is fixed. The SmartFan cooling system offers silent fan-assisted convection cooling to keep the system running reliably.
1U steel housing
High quality audio with low distortion
Individual level controls for each channel
XLR, 1/4`, and Euroblock inputs, 5-way binding post outputs
Stereo or bridged operating modes
Ground-lift switch for eliminating hum
LED indicators for power, signal, clip, and protect
SmartFan cooling system is fan-assisted for quiet, reliable operation
Protection circuitry prevents damage from overheating, overloads, and short circuits. It will disconnect the outputs when a fault is present, and resume normal operation when the fault has been removed
EAN: 840402021506
The SLA-2-F from ART is a rack mountable two-channel power amplifier designed for studio use. It offers a wide frequency response with very low noise and distortion for quality audio output. XLR, 1/4`, and Euroblock input connectors are provided, along with five-way binding post outputs. Each channel has its own level control on the front panel.
The SLA-2-F can operate in stereo or bridged mode, and features a ground-lift switch to eliminate hum caused by ground loops. The unit offers full protection circuitry for short circuits, overloads, and overheating. If any faults are detected, the amplifier will disconnect the outputs and automatically return to normal operation when the fault is fixed. The SmartFan cooling system offers silent fan-assisted convection cooling to keep the system running reliably.
1U steel housing
High quality audio with low distortion
Individual level controls for each channel
XLR, 1/4`, and Euroblock inputs, 5-way binding post outputs
Stereo or bridged operating modes
Ground-lift switch for eliminating hum
LED indicators for power, signal, clip, and protect
SmartFan cooling system is fan-assisted for quiet, reliable operation
Protection circuitry prevents damage from overheating, overloads, and short circuits. It will disconnect the outputs when a fault is present, and resume normal operation when the fault has been removed
ART SLA-2-F Specs
| Output Power | 200W RMS Per Channel @ 8 Ohms Stereo 280W RMS Per Channel @ 4 Ohms Stereo 560W RMS @ 8 Ohms Bridged-Mono |
| Damping Factor | > 100 |
| Input Sensitivity | 1V for Full Power into 8 Ohms |
| Input Impedance | 44 kOhms, Balanced 22 kOhms, Unbalanced |
| Gain | Not Specified by Manufacturer |
| Frequency Response | 10Hz - 40kHz, ±0.5dB |
| Signal-to-Noise Ratio | Not Specified by Manufacturer |
| Total Harmonic Distortion (THD) | < 0.05% (Typical) |
| Input Connectors | 2 x XLR Female 2 x 1/4" Jacks 1 x 6-Pin Removable Terminal Block 1 x AC Power In |
| Output Connectors | 4 x 5-Way Binding Posts (2 Per Channel) |
| Controls Front Panel | 1 x Power Switch 2 x Level Control Knobs |
| Controls (Rear) | 1 x Stereo/Bridge Mode Selector Switch 1 x Ground-Lift Switch |
| Indicators | 1 x Blue Power LED 2 x Red Protect LEDs 2 x Red Clip LEDs 2 x Green Signal LEDs |
| Cooling | SmartFan Convection Cooling, Silent Fan-Assisted System |
| Power | 230VAC |
| Dimensions | 19 x 1.75 x 13.5" (483 x 44 x 343mm) |
| Weight | 19.8 lbs (9kg) |
Packaging Info
| Package Weight | 23 lb |
| Box Dimensions (LxWxH) | 24 x 18 x 5" |
In the Box
- ART SLA-2-F 2-Channel Studio Linear Power Amplifier (230V)
- Power Cord
- 3-Year Manufacturer Warranty
No posts found
