Ashly ECOTOUR500.2-120V-U Overview
Power professional PA speakers with the ultra-efficient Ashly EcoTour 500.2, a 2-channel power amplifier that delivers up to 500W of power per channel (1000W bridged). The unit incorporates Ashly's proprietary ultra-efficient D-MAX amplifier technology for the cleanest and most reliable performance with lower power draw. Additionally, the 500.2 can power a variety of speaker types including Low Z (2, 4 & 8 Ohms) to Hi Z (70 or 100V).
The 500.2 is 2 RU and can be mounted into a standard 19" rack enclosure. The rear panel features combo XLR-1/4" and Euroblock inputs, as well as speakON outputs. Each channel features a switchable 80 Hz HPF and Clip Limiter. The front panel provides a volume control knob for each channel and comprehensive LED indicators for levels and amplifier status.
At a Glance
- 2-channel, 500W per channel (2 and 4 ohms)
- Active power factor correction (PFC)
- Low-impedance output (to 2 ohms)
- Direct 70 or 100V output
- Extremely efficient and lightweight
- Neutrik Combo XLR-1/4" jack and Euroblock input connectors
- speakON output connectors
- Front-panel soft-power switch, defeatable
- Front-panel level controls, fully off = mute, defeatable
- Front-panel LEDs for clip/mute, signal, current, temperature, bridge mode, protect, and front-panel disable
- 80 Hz second-order hi-pass filter per channel (on/off)
- Clip limiter per channel (on/off)
- Input gain settings per channel: 26, 32, 38 dB, or 1.4V
- Universal 100 to 240 VAC operation, 50 to 60 Hz, detachable AC connector
- Continuously variable cooling fan
- Protection: inrush current limitation, overtemperature, output short-circuit/overpower, output DC, mains fuse
- Safety/Compliance: cTUVus, CE, FCC Class B, RoHS
- Ashly 5-year warranty
D-MAX Technology
Ashly's all-new, proprietary D-MAX technology brings together smart, cutting-edge amplifier design, a brand-new ultrafast switching power supply with silicon carbide semiconductors and diodes, and intelligent power management to deliver ultimate efficiency.
- When current and voltage are exactly in phase, current demand is reduced and efficiency increased. Dynamic Power Factor Correction tracks current continuously to maintain accurate monitoring abd control.
- Silicon carbide semiconductors boost both speed and efficiency and are significantly faster than the old-school pure silicon of the past.
- Traditional silicon semiconductors don't shut off instantly. They have a lag time called Switching Loss, leading to a residual tail current. From an audio-quality standpoint, this makes for a sloppier, less precise sound; from an efficiency standpoint, it sucks up unnecessary power.
- Instead, Ashly is pioneering the use of silicon carbide semiconductors. They have unique electrical characteristics that render them able to switch on and off far faster than conventional silicon. The result is an amplifier design that's faster (thus better audio fidelity) and more efficient.
SailFlow Cooling Architecture
- Power amplifiers need cooling. In most amps, heat-reducing airflow takes a convoluted path in and around internal components. Front-to-back, back-to-front, and side-to-side, those nice perforated grilles look simple until you look inside the amp and see the helter-skelter airflow.
- Ashly didn't want cooling air to just wander around inside the EcoTour chassis, so it came up with its unique SailFlow architecture, which directs internal airflow strictly over the areas that generate the most heat, rather than arbitrarily over the whole amp. This keeps the already highly efficient EcoTour Series even cooler and assures reliable, stable operation, even under heavy loads.
EAN: 801128006154
Ashly ECOTOUR500.2-120V-U Specs
Key Specs
Number of Channels | 2 |
Amplifier Power Rating | 2 Ohms / 4 Ohms / 70 V: 500 W per Channel 8 Ohms: 250 W per Channel 4 Ohms / 8 Ohms / 100 V: 1000 W Bridged |
Amplifier Class | Class-D |
Load Impedance / Voltage | 2 / 4 / 8 Ohms per Channel 70 / 100 V per Channel |
Analog Audio I/O | 2x Block 3-Pin Balanced Line Input 2x Combo XLR-1/4" 3-Pin Female Balanced/Unbalanced 2x speakON NL4 Speaker Output |
Digital I/O | No |
Network I/O | No |
Rackmount Size | 2 RU |
Amplifier
Number of Channels | 2 |
Amplifier Power Rating | 2 Ohms / 4 Ohms / 70 V: 500 W per Channel 8 Ohms: 250 W per Channel 4 Ohms / 8 Ohms / 100 V: 1000 W Bridged |
Amplifier Class | Class-D |
Load Impedance / Voltage | 2 / 4 / 8 Ohms per Channel 70 / 100 V per Channel |
Performance
Protections | AC Fuse, DC Fault, Overcurrent, Overvoltage, Power Supply, Thermal |
Frequency Response | 20 Hz to 20 kHz ±0.05 dB |
Damping Factor | > 250 at 8 Ohms |
Input Sensitivity | 1.4 Vrms to 2.24 Vrms / 5.1 dBu to +9.2 dBu |
Input Impedance | 10 Kilohms |
Max Input Level | +21 dBu |
SNR | > 98 dB |
THD+N | < 0.5% (8 Ohms, -10 dB, 20 Hz to 20 kHz) |
Distortion | < 0.5% (SMPTE, Typical) |
Crosstalk | -75 dB (Full Output, 1 kHz) |
Signal Processing
Filters | High-Pass: 80 Hz, 12 dB/Octave |
Connectivity
Analog Audio I/O | 2x Block 3-Pin Balanced Line Input 2x Combo XLR-1/4" 3-Pin Female Balanced/Unbalanced 2x speakON NL4 Speaker Output |
Digital I/O | No |
Network I/O | No |
USB I/O | No |
Mobile App Compatible | No |
Wireless | No |
Power
AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
AC Power Connector | 1x IEC 15 A / NEMA 5-15 |
Current Consumption | 0.2 A (Standby) 0.27 A (Idle) 1.5 A (1/8 Power) |
Power Consumption | 8 W (Standby) 17 W (Idle) 172 W (1/8 Power) |
Physical
Display & Indicators | 4x Multi-Color LED (Clip/Current/Mute/Signal/Temp, per Channel) |
Rackmount Size | 2 RU |
Cooling | Fan (Variable Speed) |
Thermal Dissipation | 28 BTU/hr (Standby) 57 BTU/hr (Idle) 148 BTU/hr (Typical) |
Operating Temperature | 32 to 120°F / 0 to 48°C |
Dimensions | 19.0 x 3.5 x 16.1" / 48.3 x 8.9 x 40.9 cm |
Weight | 15 lb / 6.8 kg |
Packaging Info
Package Weight | 19.595 lb |
Box Dimensions (LxWxH) | 23 x 20.2 x 6.6" |
In the Box
- Ashly EcoTour 500.2 High-Efficiency 2-Channel 1000W Touring Amplifier
- 2 x Input Block Connectors
- Power Cord
- 5-Year Manufacturer Warranty
No posts found