EAN: 694970276703
The nX Series NX8002 2-Channel 800W Power Amplifier with Programmable Outputs from Ashly is a Class-D switching amplifier combined with a switch mode power supply. This amplifier meets the requirements of demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces, and convention centers. The rear panel has DIP switches for programming each channel output for either High-Z or Low-Z operation.
2-Channel high-output amplifier with programmable output on each channel (High-Z or Low-Z, selected via rear panel DIP switches)
Power-saving, Energy Management System with automatic <1W sleep-mode (defeatable)
Front panel power switch and level controls (can be disabled for security)
Rear panel DIP switches per channel for selection of high pass filter, limiter, input gain, and High-Z or Low-Z speaker output configuration
Remote DC level control on each input channel
Switch mode power supply automatically detects 120 or 240VAC operation
Extensive protection circuitry and continuously variable cooling fans
Multiple independent internal power supplies provide increased channel separation and reliability
Neutrik Combo XLR - 1/4` TRS jack plus Euroblock input connectors
Neutrik speakON twist locking loudspeaker connectors for security, safety, and reliability
Neutrik powerCON detachable AC mains connector
Made in USA
Ashly NX8002 Specs
General
Voltage Gain | Selectable at 26, 32, or 38 dB, and 1.4 V |
Damping Factor | >250 (8 © load <1 kHz) |
Filter | Input High Pass Filter: 80 Hz 2nd order |
Distortion | <0.5% SMPTE, typical <0.5% THD-N, typical (8 ©, 10 dB below rated power, 20 Hz to 20 kHz) |
Channel Separation | -75 dB (dB from full output, 1 kHz) |
Signal / Noise | 20 Hz to 20 kHz, un-weighted >108 dB |
Frequency Response | 20 Hz to 20 kHz, ±0.05 dB |
Connector | Balanced Input Connector: Euroblock 3.5 mm, 1/4" TRS and XLR combo jack |
Input Impedance | 10 k© |
Maximum Input Level | 21 dBu |
Speaker Output | Connector: Neutrik speakON |
Level Control | Remote DC: 4 x 3.5 mm Euroblock - Gnd, CV, V+ per input |
Attenuation | Front panel, software, offset link group, and remote per channel Fully off = mute |
Protection Circuits | Inrush current limitation, temperature monitoring, output over-power protection, and mains fuses |
Cooling | Continuously variable temperature controlled axial fans |
Environmental | Non-condensing 32 to 113°F (0 to 45°C) |
Power Requirements
Power | At 50 Hz Nominal (Automatic Sensing SMPS): 240 VAC Operating Range: 70 to 135 VAC Minimum Power-Up: 85 VAC At 60 Hz Nominal (Automatic Sensing SMPS): 240 VAC Operating Range: 140 to 270 VAC Minimum Power-Up: 170 VAC |
Connector | Power Cable Connector: 20 A powerCON |
Maximum Output Power | Per Channel, Low-Z Output, All Channels Driven 2/4/8 „¦: 800 W |
Output | Low Z Output, Bridge Mode, All Channels Driven: 1600 W (4/8 „¦) 70V, 100V Output, All Channels Driven: 800 W (70/100 V (per channel) |
Power Draw | Sleep Mode: < 1 W Standby Mode: 25 W Idle (No Signal): 40 W |
Current Draw | For 240 VAC Sleep Mode: 0.1 A Standby Mode: 0.38 A Idle (No Signal): 0.70 A For 240 VAC Sleep Mode: 0.05 A Standby Mode: 0.19 A Idle (No Signal): 0.35 A Maximum, All Channels Driven, Typical Input |
Dissipation | Thermal Dissipation: Sleep Mode: <3.4 BTU/hr Standby Mode: 85 BTU/hr Idle (no signal): 136 BTU/hr Typical (1 / 8 Max Power @ 2 „¦): 495 BTU/hr |
LED Indicators | Front Panel LED Indicators White: Power Switch: On, off, standby (flashing) |
Dimensions | 19.0 x 3.5 x 16.8" (48.3 x 8.9 x 42.8 cm) |
Weight | 27.6 lb (12.5 kg) |
Packaging Info
Package Weight | 29 lb |
In the Box
- Ashly nX Series NX8002 2-Channel 800W Power Amplifier with Programmable Outputs
- 5-Year Manufacturer Warranty
No posts found