Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Crown Audio DCi 2|1250N Two-Channel Power Amplifier with BLU link (1250W, 4 Ohms)
EAN: 871015007922
The 2RU DCi 2|1250N Two-Channel Power Amplifier with BLU link from Crown Audio is a two-channel high-performance power amplifier with BLU link from the DriveCore Install Network Series which delivers 1250W of power at 4 Ohms. It is rack-mountable and is recommended for installed sound, cinema, and recording broadcast.
Analog & Digital Inputs
The DCi 2|1250N offers digital audio transport via BLU link, plus balanced analog inputs. The priority input router allows you to specify a primary input. If audio is lost the amp automatically switches to the other input.
Network Monitoring & Control
HiQnet protocol offers monitoring, control, and audio manipulation over standard TCP/IP. You can remotely monitor and control all networked DCi amplifiers. In addition, the Audio Architect software and the Powered by Crown app can be used with DCi amplifiers.
Programmable General Purpose Input/Output Ports
GPIO ports can be configured to perform various functions, such as volume control, preset recall, and error report to a master computer.
Digital Signal Processing
DSP capabilities include LevelMAX Limiters, Input/Output EQ, Delay, Matrix Mixer, and Speaker Line Monitoring.
EAN: 871015007922
The 2RU DCi 2|1250N Two-Channel Power Amplifier with BLU link from Crown Audio is a two-channel high-performance power amplifier with BLU link from the DriveCore Install Network Series which delivers 1250W of power at 4 Ohms. It is rack-mountable and is recommended for installed sound, cinema, and recording broadcast.
Analog & Digital Inputs
The DCi 2|1250N offers digital audio transport via BLU link, plus balanced analog inputs. The priority input router allows you to specify a primary input. If audio is lost the amp automatically switches to the other input.
Network Monitoring & Control
HiQnet protocol offers monitoring, control, and audio manipulation over standard TCP/IP. You can remotely monitor and control all networked DCi amplifiers. In addition, the Audio Architect software and the Powered by Crown app can be used with DCi amplifiers.
Programmable General Purpose Input/Output Ports
GPIO ports can be configured to perform various functions, such as volume control, preset recall, and error report to a master computer.
Digital Signal Processing
DSP capabilities include LevelMAX Limiters, Input/Output EQ, Delay, Matrix Mixer, and Speaker Line Monitoring.
Crown Audio DCI 21250N Specs
Output Power | 1250 W |
Frequency Response | ±0.25 dB @ 8 Ohms, 20 Hz - 20 kHz |
Signal-to-Noise Ratio | BLU link: >104 dB, A - weighted |
Total Harmonic Distortion | 0.35% @ full rated power, 20 Hz - 20 kHz |
Voltage Gain | 34 dB |
Damping Factor | >1500 @ 20 Hz to 100 Hz |
Input Impedance | Nominal Balanced: 10 kOhms Unbalanced: 5 kOhms |
Maximum Input Level | Before Compression: +20 dBu, low gain mode |
Load Impedance | Stereo/Dual Mode: 2 - 16 Ohms; 70 and 100 Vrms Bridge Mono: 4 - 16 Ohms; 140 Vrms and 200 Vrms |
Cooling | Continuously variable speed forced air, front to back airflow |
Fan Noise | 45 maximum, re dBA SPL @ 1 m |
Required AC Mains | 100 - 240 VAC 50/60 Hz (±10%) |
Power Connector | 15 A IEC |
Dimensions | 19.00 x 3.50 x 14.25" (48.30 x 8.90 x 35.63 cm) |
Weight | 23.5 lb (10.66 kg) |
In the Box
- Crown Audio DCi 2|1250N Two-Channel Power Amplifier with BLU link (1250W, 4 Ohms)
- 6-Year Manufacturer Warranty
No posts found