The lightweight nXp3.0 4-Channel Multi-Mode Network Power Amplifier from Ashly features programmable output on each channel selectable via rear panel DIP switches with swept load impedance monitoring. Audio is processed via the 32-bit SHARC DSP at 48 or 96 kHz sample rates and a built-in signal generator is provided for test tone and noise-masking.
The nXp3.0 amplifier comes pre-installed with Dante network audio module and features aux preamp outputs. Ethernet control is supported via the free Protea NE software (downloadable from Ashly s website) and serial data control is possible via Ashly programmable remotes or third party controllers (available separately). The Protea DSP (Digital Signal Processing) software is included for dynamics, gain, equalization, matrix mixer, crossover, delay, and metering.
The amplifier is suitable for live sound and fixed installation sound systems at performance venues, stadiums, arenas, convention centers as well as schools, store fronts, and places of worship.
32-bit SHARC DSP processing at 48 or 96 kHz sample rates
Class-D switching amplifier technology
Selectable 80 Hz Hi-pass filter, limiter, and input gain per channel, via rear panel
Comprehensive software controlled Protea DSP including dynamics, gain, equalization, matrix mixer, crossover, delay, and metering
Precision swept load impedance monitoring of individual amplifier channels for remote diagnosis of speaker problems
Remote iPad control app (available for free) for selecting DSP functions including gain, mute, matrix, A/B source select, PEQ filter level, and meters
Ethernet port for software control and monitoring of amplifier functions, with front panel COM activity LED
Serial data port available for Ashly WR-5 and RD-8C programmable remote control (optional RS-232 converter INA-1 available for third party controllers)
Real-time clock with event scheduler
Assign automatic execution of selected functions and tasks
Event scheduler is programmed using the free Protea NE software and stored in the amplifier
Protea NE software will load a speaker manufacturer s .fir or .csv file for precision tuning
Multi-mode operation-selectable outputs on each channel allow you to choose the desired output mode
Preset recall via contact closure, software control, remote control, or event scheduler
Programmable power-on delay
Remote gain and zone control with neWR-5 and FR-8/FR-16 programmable networked remotes
Aux preamp line outputs for driving other amplifiers
Fault condition logic outputs, assignable
Signal generator function for test and noise masking
Neutrik Combo XLR - 1/4 TRS jack plus Euroblock input connectors
Neutrik speakON twist locking loudspeaker connectors
Neutrik powerCON detachable AC mains connector
Set the DIP-switch configuration for low impedance (2, 4, and 8 Ohms), or constant voltage (70V or 100V)
Remote DC level control per channel
Extensive protection circuitry, continuously variable cooling fans
Power-saving Ashly EMS (Energy Management System) which provides an automatic sleep-mode drawing less than 1W
Multiple internal power supplies-provides increased channel separation and reliability
Instant standby mode, 30% reduction in idle power consumption, triggered by contact closure, software control, or event scheduler
Auto-switching 120 / 240 VAC power supply
cTUVus, CE, FCC, RoHS compliant
Ashly NXP3.04 Specs
Amplifier
Number of Channels | 4 |
Voltage Gain | Selectable at 26, 32, or 38 dB, or 1.4 V |
Damping Factor | >250 (8 Ohms load <1 kHz) |
Filter | Input High Pass Filter: 80 Hz 2nd order |
Distortion | SMPTE (Typical): <0.5% THD-N (Typical): <0.5% (8 ohms, 10 dB below rated power, 20 Hz to 20 kHz) |
Channel Separation | -75 dB (dB from full output, 1 kHz) |
Signal-to-noise | >114 dB (20 Hz to 20 kHz, un-weighted) |
Frequency Response | 20 Hz to 20 kHz, ±0.05 dB |
Input Impedance | 10 kOhms |
Balanced Input | Euroblock 3.5 mm, 1/4" TRS and XLR combo jack |
Maximum Input Level | +21 dBu |
Speaker Output | Neutrik speakON |
Network Controllers | Compatible with standard 100 MB Ethernet |
AUX Outputs | Balanced Euroblock 3.5 mm |
Maximum Output Level | +21 dBu (Aux output) |
Standby Mode | Euroblock 3.5 mm, close contact to GND for standby mode |
Preset | Euroblock 3.5 mm, close contact to GND for preset 1-4 recall |
Data | Data Connection: Euroblock 3.5 mm - GND, 18 V, in, out |
Outputs | Fault Condition Logic Outputs: 4 / 3.5 mm Euroblock |
Level Control | Remote DC Level Control: Euroblock 3.5mm - GND, CV, V+ per input |
Audio Control Module | Network Audio via Dante digital interface (pre-installed) |
Attenuation | Per Channel: Front panel, software, offset link group, and remote Fully off = Mute |
Front Panel LED Indicators | White LED: Power Switch: On, off, flashing (standby mode) Red LED: Protect: On (fault condition or shut down), Off Clip / Mute (Per Channel): Clip @ 1 dB below full output / mute Blue LED: Sleep Mode: On (when the amplifier is asleep from audio inactivity) Yellow LED: Disable: On (when the power switch & front panel attenuators are disabled) Temperature (Per Channel): On dim at 90% maximum operating temperature, full bright + protect at 100% Green LED: Com: On, for Ethernet data or device ID Signal (Per Channel): -18 dBu, below rated output Bridge (Per Channel): On, off Current (Per Channel): Proportional to output |
Protection Circuits | Inrush current limitation, temperature monitoring, output over-power protection, and mains fuses |
In the Box
- Ashly nXp3.0 4-Channel Multi-Mode Network Power Amplifier with Protea DSP Software Suite & Dante Digital Interface
- 5-Year Manufacturer Warranty
No posts found