The K-Tek Airo Booming Intro Kit 1 combines a boompole, shockmount, XLR cable, fuzzy windscreen, and a padded kit bag to create the primary components of a professional audio recording setup for location or studio applications. Simply add a shotgun microphone and you ll be capturing content in no time.
Airo by K-Tek ABP1 Aluminum Boompole 1 (Uncabled)
The uncabled ABP1 Aluminum Boompole 1 from Airo by K-Tek is a lightweight, four-section telescopic boompole that can be used for ENG, EFT, and other field recording applications. It features a collapsed length of 3.2 and an extended length of 10.8 .
Other features include: a non-rotational tube set, rubber collar grips, a removable 3/8" -16 thread top attachment, and a removable anodized aluminum base. The uncabled ABP1 boompole weighs only 1.6 pounds, and easily collapses to store in any standard equipment case.
Four-section telescopic boompole
Non-rotational tube set
Anodized aluminum construction
Rubber collar grips
Top attachment: 3/8" -16 male thread (removable)
Bottom attachment: Anodized, aluminum base (removable)
EAN: 649906207757
Airo by K-Tek AXC25 XLR Microphone Cable (25 )
The 25 AXC25 XLR Microphone Cable from Airo by K-Tek is designed for use with boompoles and microphone products. It has a 3-pin straight male XLR on one end and a 3-pin straight female XLR on the other end.
EAN: 649906207726
K-Tek Airo Fuzzy Windscreen 1
The K-Tek Airo Fuzzy Windscreen 1 is designed to mitigate wind noise while recording on location. The windscreen uses open-cell foam and is covered by faux fur, which is made from natural-looking black and gray medium length fibers. The seamless front panel ensures optimal recording performance. The Airo Fuzzy Windscreen 1 fits most common shotgun microphones, such as the Rode NTG Series or Aputure Deity range. This windscreen can also accommodate microphones up to 0.89³ in diameter and has an internal length of 8.7³ . Additionally, the internal length allows for most common microphones to be covered in a way that leaves an open " bubble" between the tip of the microphone and the fuzzy windscreen for clearer sound capture.
Compatible With
- Aputure Deity
- DPA 4017
- Neumann KMR81
- Rode NTG1
- Rode NTG2
- Rode NTG3
- Rode NTG4+
- Sanken CS1e
- Sanken CS3e
- Schoeps CMC641
- Schoeps CMIT5u
- Schoeps SuperCMIT 5u
- Sennheiser ME66/K6
- Sennheiser MKH416
- Sennheiser MKH8060
EAN: 649906207696
Airo by K-Tek ASM1 Shockmount 1
The ASM1 Shockmount 1 from Airo by K-Tek is a rugged shockmount designed for boompoles and mic stands. It can be used to securely isolate a shotgun microphone from swinging and eliminate handling noise in ENG, EFP, and other field recording applications. The shockmount features two molded rubber suspenders. In addition, a threaded adapter is included to accommodate 5/8" mic stands.
EAN: 649906207740
Airo by K-Tek AKB1 Kit Bag 1 (Black)
The black AKB1 Kit Bag 1 from Airo by K-Tek is a triangular-shaped boompole bag with room to transport a shockmount, windscreen, cables, and other audio accessories. It features a shoulder strap and a large zippered opening at the top, and is built with 600D polyester material, which is padded with an easy-view, gray interior. Measuring 46.5 x 9.9 x 3.2" , the AKB1 Kit Bag s dimensions are large enough to transport your ENG, EFP and other field recording or application accessories.
EAN: 649906207672
Airo by K-Tek ABP1 Aluminum Boompole 1 (Uncabled) Specs
| Material of Construction | Aluminum |
| Sections | 4, telescopic |
| Length | 3.2 to 10.8` (98 to 330 cm) |
| Weight | 1.62 lb (735 g) |
Packaging Info
| Package Weight | 1.65 lb |
| Box Dimensions (LxWxH) | 41.6 x 3.3 x 3.3" |
Airo by K-Tek AXC25 XLR Microphone Cable (25`) Specs
General
| Connector 1 | XLR 3-Pin Male |
| Connector 2 | XLR 3-Pin Female |
| Cable Length | 25` / 7.62 m |
Packaging Info
| Package Weight | 0.85 lb |
| Box Dimensions (LxWxH) | 11 x 7.7 x 6.35" |
K-Tek Airo Fuzzy Windscreen 1 Specs
| Compatible Mic Diameter | 0.7 to 0.89" / 18 to 22.5 mm |
| Inner Depth | 8.7" / 22.1 cm |
| Material | Faux Fur |
| Length | 9.8" / 24.9 cm |
| Weight | 1.9 oz / 53.9 g |
Packaging Info
| Package Weight | 0.15 lb |
| Box Dimensions (LxWxH) | 10 x 3.2 x 2.4" |
Airo by K-Tek ASM1 Shockmount 1 Specs
General
| External Dimensions | 2.5" (6.3 cm) |
| Compatibility Models | Rode NTG mics |
| Weight | 2.6 oz (73 g) |
Packaging Info
| Package Weight | 0.2 lb |
| Box Dimensions (LxWxH) | 5.95 x 2.8 x 1.95" |
Airo by K-Tek AKB1 Kit Bag 1 (Black) Specs
| Carry/Transport Options | Handle, Shoulder Strap |
General
| Materials | Exterior: Polyester |
| Dimensions | Exterior 47.3 x 10.6 x 4.3" / 120 x 27 x 11 cm Interior 46.5 x 9.9 x 3.2" / 118 x 25 x 8 cm |
| Weight | 1.17 lb / 533 g |
Packaging Info
| Package Weight | 1.2 lb |
| Box Dimensions (LxWxH) | 17 x 6.4 x 3.9" |
In the Box
- 2-Year Manufacturer Warranty
- Threaded Adapter
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
No posts found
