sE Electronics DM1 Dynamite Active Inline Microphone Preamplifier
EAN: 819032011560
The DM1 Dynamite Active Inline Microphone Preamplifier from sE Electronics is an active inline preamp intended to be inserted between a passive ribbon or dynamic microphone and a microphone preamplifier (sold separately). It can be used to deliver a robust 28 dB of gain to boost the audio signal of a passive mic, which improves the level through the preamplifier without adding noise or coloration.
EAN: 819032011560
The DM1 Dynamite Active Inline Microphone Preamplifier from sE Electronics is an active inline preamp intended to be inserted between a passive ribbon or dynamic microphone and a microphone preamplifier (sold separately). It can be used to deliver a robust 28 dB of gain to boost the audio signal of a passive mic, which improves the level through the preamplifier without adding noise or coloration.
With a sophisticated Class-A design and high-grade FETs, the DM1 has a low self noise. It is built with a dedicated output buffer amplifier allowing it to drive long cable runs and reduce RF interference, buzz, and hum. Additionally, the DM1 Dynamite Active Inline Microphone Preamplifier offers a roadworthy, slim, all-metal design, ensuring reliable operation for onstage applications in difficult environments.
sE Electronics DM1 Specs
General
| In-Line Accessory Type | Pre-Amplifier |
| Input / Output Level | Input: Mic Level Output: Mic Level |
| Number of Channels | 1 |
| Gain | +28 dB (1-Kilohm Load) |
| Circuit Type | Class-A FET |
| Controls | None |
Connectivity
| Inputs/Outputs | 1 x XLR 3-Pin Female Input 1 x XLR 3-Pin Male Output |
Performance
| Frequency Response | 10 Hz to 120 kHz -0.3 dB |
| Impedance | 135 Ohms |
| Load Impedance | 1 Kilohms (Minimum) |
| Max Output Level | +8.3 dBV (0.5% THD) |
| Noise | Output Noise: 30 dBm (JIS-A) |
Power
| Operating Voltage | 48 V (Phantom Power) |
| Operating Current Consumption | 3.0 mA |
Physical
| Dimensions | 0.75 x 3.76" / 1.91 x 9.55 cm |
| Weight | 2.8 oz / 79.9 g |
Packaging Info
| Package Weight | 0.22 lb |
| Box Dimensions (LxWxH) | 14.4 x 2.85 x 1.25" |
In the Box
- sE Electronics DM1 Dynamite Active Inline Microphone Preamplifier
- 2-Year Manufacturer Warranty
No posts found
