Astatic 2220VP Continuously Variable Surface Mount Boundary Microphone (Black)
EAN: 631922103793
If you need to mount an inconspicuous boundary microphone into a table up to 3 thick, consider the Astatic 220VP Microphone from CAD. Styled in black, this mic is designed for speech pickup in governmental, institutional, religious, and similar scenarios.
The 220VP is a compact, button-style condenser mic with a continuously variable polar pattern. After the mic is installed into surfaces measuring up to 3 thick, the microphone will operate free from interference from cell phones, two-way communication, and other RF interference.
You can precisely tailor the polar pattern of this mic for the best performance, depending upon the application or environment. The mic offers a built-in 80 Hz high-pass filter to remove unwanted low-frequency information to bolster intelligibility. The mic has a threaded, all-metal construction to mount easily into hard surfaces. In fact, when you mount the mic into a hard surface, such as a wooden table, the microphone takes advantage of acoustical effects to improve the signal to noise ratio.
The 220VP terminates in a 3-pin XLR connection recessed into the mic itself. is terminated with a standard 3-pin XLRM-type connector recessed in the body of the microphone.
Continuously variable polar pattern
Immunity to RF (Radio Frequency) interference
Natural low-frequency roll-off
Mounts into 3 thick surfaces
3-pin XLR output
EAN: 631922103793
If you need to mount an inconspicuous boundary microphone into a table up to 3 thick, consider the Astatic 220VP Microphone from CAD. Styled in black, this mic is designed for speech pickup in governmental, institutional, religious, and similar scenarios.
The 220VP is a compact, button-style condenser mic with a continuously variable polar pattern. After the mic is installed into surfaces measuring up to 3 thick, the microphone will operate free from interference from cell phones, two-way communication, and other RF interference.
You can precisely tailor the polar pattern of this mic for the best performance, depending upon the application or environment. The mic offers a built-in 80 Hz high-pass filter to remove unwanted low-frequency information to bolster intelligibility. The mic has a threaded, all-metal construction to mount easily into hard surfaces. In fact, when you mount the mic into a hard surface, such as a wooden table, the microphone takes advantage of acoustical effects to improve the signal to noise ratio.
The 220VP terminates in a 3-pin XLR connection recessed into the mic itself. is terminated with a standard 3-pin XLRM-type connector recessed in the body of the microphone.
Continuously variable polar pattern
Immunity to RF (Radio Frequency) interference
Natural low-frequency roll-off
Mounts into 3 thick surfaces
3-pin XLR output
Astatic 220VP Specs
Microphone
| Form Factor | Boundary/Surface Mount |
| Intended Sound Sources | Speech/Voice Over |
| Sound Field | Mono |
| Capsule | Condenser |
| Pattern Selection | Continuously Variable |
| Tone Adjustment | None |
Performance
| Frequency Range | 90 Hz to 17 kHz |
| Maximum SPL | 120 dB SPL |
| Impedance | 120 Ohms |
| Sensitivity | -32 dBV |
| Equivalent Noise Level | 18 dB A-Weighted |
| THD | 1% |
Power
| Operating Voltage | 12 to 48 V (Phantom Power) |
| Operating Current Consumption | 4 mA |
Physical
| Color | Black |
| Mounting | Surface-Mount (via Integrated Hardware) |
| Included Case | None |
| Included Filters | None |
| Construction Material | Metal |
| Certifications | RoHS *as per Manufacturer |
| Dimensions | ¸: 1.1 x L: 3.35" / ¸: 28 x L: 85 mm |
| Weight | 3.9 oz / 111 g |
Packaging Info
| Package Weight | 0.36 lb |
| Box Dimensions (LxWxH) | 4.9 x 2.4 x 2.3" |
In the Box
- Astatic 2220VP Continuously Variable Surface Mount Boundary Microphone (Black)
- 2 x Rubber Bushings
- Hex Nut
- Washer
- 2-Year Manufacturer Warranty
No posts found
