Samson CM11B Overview
The Samson Audio CM11B is a low profile boundary microphone with an omnidirectional polar pattern. The CM11B is designed for surface mounting and excels in reproducing audio in conferences, lectures, boardroom meetings, classrooms, interviews, etc. The omnidirectional pick up pattern provides a 360 degree pick up area, around the perimeter of the capsule.
The polar pattern results in accurate pickup of round-table discussions without degradation. A mini XLR output connector is located on the rear and a 30-foot mini XLR to standard XLR output cable is supplied. The CM11B is powered with a 9 to 52V phantom power source. The heavy duty construction features a die-cast reinforced grille to protect against damage due to shock.
Omnidirectional Polar Pattern
The omnidirectional polar pattern provides a generous pickup area around the perimeter, allowing accurate signal reproduction at all directions.
Sleek Low Profile
The low profile and black matte finish enable the CM10B to be easily concealed in broadcast and performance applications.
Wide Linear Frequency Response
The wide linear frequency response provides accurate detail and clarity while maintaining a low noise floor.
Heavy Duty Construction
The heavy duty reinforced grille protects against sudden shock and abuse.
Transducer | Fixed-Charge Condenser |
Polar Pattern | Omnidirectional |
Frequency Response | 30Hz to 18kHz |
Dynamic Range (Typical) | 103dB |
Signal-to-Noise Ratio | 70dB |
Maximum Input Sound Level | 127dB |
Power Requirements | 9 ~ 52V Phantom Power |
Output Impedance | 600 ohms |
Output Connectors | 3-pin XLR Type |
Pad | No |
Low Frequency Roll-Off | No |
Dimensions | 0.94 x 3.31" (24 x 84mm) (Height x Diameter) |
Weight | not specified by manufacturer |
Packaging Info
Package Weight | 1.04 lb |
Box Dimensions (LxWxH) | 9.6 x 4.8 x 3.1" |
In the Box
- Samson CM11B Omnidirectional Boundary Microphone
- 30-Foot Mini to XLR Cable
- 2-Years Warranty
No posts found