EAN: 042406051354
This black Shure MX393/S Microflex is a supercardioid boundary microphone designed to capture high-quality speech and voice for sound-reinforcement and teleconferencing installations in governmental, institutional, religious, and business settings.
The MX393/S can be permanently installed on conference tables, desks, or lecterns. Its sleek, low-profile design is ideal for conference rooms and other sites where minimal mic visibility is of high priority and aesthetics are important.
The microphone features a supercardioid polar pattern best used for a single person. The mic takes advantage of the boundary effect to capture clear speech with reduced room ambience for intelligibility. The interchangeable capsule design provides the installer with greater flexibility and makes it possible to easily reconfigure microphone coverage as the need arises.
The MX393/S is equipped with a programmable, silent membrane switch with a bicolor LED that indicates the status of the mic.
The mic resists interference from devices such as cell phones and two-way communication devices. It requires 11 to 52V phantom power to operate. Included is an easy-to-use paint mask for custom-color installations.
Key Features
Sleek, low-profile design for surface mounting
Supercardioid polar pattern and flat frequency response across the vocal range for natural sound
Programmable mute button with Push-to-Talk, Push-to-Mute, or Push-On/Push-Off modes and bicolor LED indicator
12 attached cable with XLR connector and back cable exit
Interchangeable capsule design
RF filtering
Paint mask for your custom-color installations
Shure MX393 Specs
Microphone
| Form Factor | Boundary/Surface Mount |
| Sound Field | Mono |
| Capsule | Electret Condenser |
| Polar Pattern | Supercardioid |
| High-Pass Filter | None |
Performance
| Frequency Range | 50 Hz to 17 kHz |
| Maximum SPL | 116 dB SPL (1 kHz, 1% THD, 1-Kilohm Load) |
| Off-Axis Rejection | 45 dB |
| Impedance | 180 Ohms |
| Sensitivity | -26.5 dBV/Pa at 1 kHz (Open Circuit Voltage, 1 kHz) |
| Dynamic Range | 94 dB |
| Signal-to-Noise Ratio | 72 dB (at 1 Pa/94 dB SPL) |
| Equivalent Noise Level | 22 dB A-Weighted |
| THD | 1% |
Connectivity
| Cable Length | 12` / 3.66 m |
Power
| Operating Voltage | 11 to 52 V |
| Operating Current Consumption | 2 mA |
Physical
| Color | Black |
| Mounting | Surface-Mount |
| Operating Temperature | 0 to 135°F / -17.78 to 57.22°C |
| Operating Humidity | 0 to 95% |
| Storage Temperature | -20 to 165°F / -28 to 74°C |
| Dimensions | W: 3 x L: 4.26" / W: 76.2 x L: 108.3 mm |
| Weight | 0.38 lb / 172 g |
Packaging Info
| Package Weight | 1.6 lb |
| Box Dimensions (LxWxH) | 9.9 x 4.9 x 3.1" |
In the Box
- Shure MX393/S Microflex Supercardioid Boundary Microphone for Installs (XLR Connector)
- Paint Mask
- Switch Paint Mask
- 5 x Rubber Pads with Adhesive
- 2-Year Manufacturer Warranty
No posts found
