The Audio-Technica ATM510 Value Kit with Microphone, Stand, Cable & Windscreen provides the essential elements needed for live vocal performance, bundled together for your shopping convenience at a substantial savings over purchasing the items individually. The kit provides the ATM510 handheld dynamic microphone with a cardioid pickup pattern along with a tripod stand with a fixed boom. A 20 XLR cable is included, allowing you to connect the mic to a wide range of mixers, PA speakers, and audio gear. The included foam windscreen helps to reduce breath and plosive noise for clearer vocals.
Audio-Technica ATM510 Handheld Cardioid Dynamic Microphone
The Audio-Technica ATM510 is a handheld cardioid dynamic microphone designed for full-range vocal reproduction in houses or worship, concert venues, conferences, and live stage applications. Its cardioid polar pattern delivers on-axis directivity while attenuating sounds from the sides and rear. The dynamic element features a neodymium rare-earth magnet for increased output level and improved transient response.
The 90 Hz to 16 kHz frequency response naturally minimizes extreme high and low frequencies for a tone tailored for speech and singing. Plosives and wind noise are reduced by the multi-stage windscreen while the anti-shock design controls handling noise. With its rugged all-metal construction, the ATM510 is sure to handle the rigors of life on the road. It ships with a stand adapter and a soft protective pouch.
Anti-shock internal mounting system reduces handling and stage noise
Tailored for smooth, natural vocal reproduction
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source
Neodymium rare-earth magnet for improved output and transient response
Excellent off-axis rejection for minimum feedback
Multi-stage windscreen design offers excellent protection against plosives, wind noise, and sibilance
Quiet-Flex stand clamp provides silent, flexible microphone positioning
Corrosion-resistant contacts from gold-plated XLR 3-pin connector
Rugged all-metal construction for tour-worthy durability
Auray MS-5230F Tripod Microphone Stand with Fixed Boom
The Auray MS-5230F Tripod Microphone Stand with Fixed Boom features durable, steel construction. The 31.5" boom arm allows you to angle the mic however you need it. An ergonomic twist-action clutch helps adjust the height of the stand, while the reinforced tripod base and nonslip feet keep it firmly and sturdily in place. The Auray MS-5230F mic stand collapses for easy transport.
EAN: 847628015586
Kopul Premium Performance 3000 Series Neutrik XLR Male to XLR Female Microphone Cable (20 , Black)
The black Kopul Premium Performance 3000 Series XLR Male to XLR Female Microphone Cable (20 ) is designed to be an extremely quiet and flexible cable that is ideal for the most demanding live sound and performance applications. The cable is engineered to be durable and provide protection against EMI, RFI, and static noise. While the cable s color-coding affords the ability to quickly differentiate between multiple connections on stage, it provides a pleasant aesthetic quality at the same time.
Premium Performance 3000 Series cables are made from 24-AWG OFC copper wire that s wrapped with PE insulation and a conductive PVC inner shield. A cotton-yarn inner layer helps reduce electrostatic and microphonic noise. The 95% dual-spiral shielding makes the cable resistant to EMI and RFI noise. The Neutrik XX silver connectors provide a high level of connectivity, and all the solder connections are shrink-wrapped for protection.
95% dual-spiral shielding offers protection from EMI and RFI noise
Twin conductive PVC inner shielding provides 100% coverage of the core conductor. It helps keep the cable s signal from radiating and affecting nearby cables and helps prevents external EMI from penetrating to the cable s core
24-AWG oxygen-free stranded copper inner core provides the best possible conductivity
Cotton yarn reduces electrostatic and microphonic noise
All solder points shrink-wrapped for protection
Neutrik XX silver connectors offer high conductivity
Caged type contact and improved ground contact
EAN: 847628558304
Auray WHF-158 Foam Windscreen for 1-5/8" Diameter Microphones (Black)
The black Auray WHF Series Foam Windscreens are designed to reduce unwanted broadband wind noise and vocal pops with minimal high frequency loss.
This WHF-158 Foam Windscreen is designed for use with many common handheld microphones with a 1-5/8" diameter head. The density of the specialty acoustic foam is optimized to help protect the microphone element from air bursts without muffling the sound.
When used on a handheld microphone, this windscreen is effective in minimizing wind noise and plosive sounds. It is most effective in calm to light breeze conditions (0 to 7 mph) and can be used indoors for protection against drafts caused by air-conditioners. Users can generally expect a 4 to 8 dB reduction in wind noise with very slight dampening of high frequencies. For most applications, the very slight high-frequency dampening is a worthwhile exchange for the notable wind noise reduction.
The WHF-158 s foam is hypoallergenic and washable and helps prevent moisture and dirt from damaging your microphone. The windscreen is designed to fit microphones from Shure, Electro-Voice, AKG, Audio-Technica, Audix, Beyerdynamic, Sennheiser, Neumann and others.
The WHF-158 Foam Windscreen for 1-5/8" Diameter Microphones is an effective solution for basic wind protection.
Fits these and other similar-sized microphones:
Shure SM58, Beta 58, Beta 87A, Beta 87C, PG58, PG48, SM48, SM96, VP88, SM87, SM53, SM54, PE85, PE86, BG3.0, PE15, PE75, 12a, 14A, 587, 587SB
Electro-Voice RE50/B, BBK1, Co5, Co7, Co9, DS35, MC100, 150, 300, MT200, N/D200, N/D247, 257, 267, N/D357, 367, 457, 757, N/D767, PL50, PL60, PL70, PL77, PL80, RE11, RE16, RE18
Sennheiser e825S, e865, MD21, 200, MD400, 425, 427, 429, MD511, 512, 515, 516, 735, MD736, ME65, MKE44, SKM3072, SKM5000, SKM100, SKM300, SKM500, SKP30
Audio-Technica AE3300, 4100, 5400, 6100, ATM23, 25, 29, 31, 41, 61, ATM91, AT801, AT802, AT813, AT814, ATW7375, ATW-T602, MB1000, Pro-1a, Pro-2ax, Pro-3, Pro-4, Pro-5, Pro-10
Audix OM-2, OM-3, OM-5, OM-6, OM-7, VX-10
AKG C900, D40, D50, D60, D80, D90, D95, D125, D130, D190, D200, D310, D321, D330, D590, D770, D880, C535, CK4, D3700, D3800, D5900
Beyerdynamic BM85, EM85, M01, M59, M69, M260, M300, M400, M500, MCE81, TGX-20, TGX-40, TGX-58, TGX-60, TGX-80
Neumann KMS105, KMS140, KMS150
Nady SP-1, SP-3, SP-4, SP-5, SP-9, SP10, WHT14, WHT15, UH10
Peavey Celebrity, PAA250, PVM835, PVM880, PV, PVi
Telex HT700, SH100, FMR150, FMR450, EN6100, H12E, VR12E
EAN: 847628562868
Audio-Technica ATM510 Handheld Cardioid Dynamic Microphone Specs
Microphone
Form Factor | Handheld |
Sound Field | Mono |
Operating Principle | Pressure Gradient |
Capsule | Dynamic |
Polar Pattern | Cardioid |
Pad | None |
High-Pass Filter | None |
Performance
Frequency Range | 90 Hz to 16 kHz |
Impedance | 300 Ohms |
Sensitivity | 1.7 mV/Pa |
Physical
Mounting | Mic Clip/Stand Adapter, (Included) |
Included Case | Zipper Pouch |
Included Filters | None |
Dimensions | : 2.11 x L: 6.69" / : 53.5 x L: 169.93 mm |
Weight | 9.1 oz / 258 g |
Packaging Info
Package Weight | 1.145 lb |
Box Dimensions (LxWxH) | 9.7 x 5.3 x 3" |
Auray MS-5230F Tripod Microphone Stand with Fixed Boom Specs
Stand
Height | 36.2 to 63" / 91.9 to 160 cm |
Base Type | Tripod |
Base Dimensions | 25.6 x 25.6" / 65 x 65 cm |
Boom
Length | 31.5" / 80 cm |
General
Material | Steel |
Weight | 4.5 lb / 2 kg |
Packaging Info
Package Weight | 5 lb |
Box Dimensions (LxWxH) | 33.5 x 4 x 4" |
Kopul Premium Performance 3000 Series Neutrik XLR Male to XLR Female Microphone Cable (20`, Black) Specs
General
Cable Length | 20` / 6.1 m |
Shielding | 95% Spiral |
Wire Gauge | 24 AWG |
Contact Plating | Silver |
Packaging Info
Package Weight | 0.765 lb |
Box Dimensions (LxWxH) | 11.6 x 11.2 x 1.15" |
Auray WHF-158 Foam Windscreen for 1-5/8" Diameter Microphones (Black) Specs
Compatible Mic Diameter | 1.62" / 4.13 cm |
Material | Foam |
Packaging Info
Package Weight | 0.015 lb |
Box Dimensions (LxWxH) | 4.9 x 2.95 x 1.4" |
In the Box
- Audio-Technica AT8470 Quiet-Flex Microphone Stand Clamp
- 5/8"-27 to 3/8"-16 Threaded Adapter
- Soft Protective Pouch
- 2-Year Manufacturer Warranty
- 2 x Cable-Guide Clip
- 2-Year Manufacturer Warranty
- 3-Year Manufacturer Warranty
No posts found