Electro-Voice RE20 2-Person Broadcaster and Cloudlifter Kit (Fawn Beige)

This Kit includes two fawn beige Electro-Voice RE20 large-diaghragm broadcast dynamic microphones with mic suspension shockmounts, a two-channel Cloudlifter mic activator with 25 dB of transparent gain, two short XLR cables, two foam windscreens, and two broadcast arms with internal springs and integrated XLR cables. With voice-tailored tone, enhanced hum rejection, plosive protection, and versatile positioning, the kit is ideal for two-person podcasts, radio show hosts, and announcers at home or in the studio.

Electro-Voice RE20 Broadcast Announcer Microphone with Variable-D (Fawn Beige)

A broadcast industry standard, the RE20 Broadcast Announcer Microphone with Variable-D from Electro-Voice is a cardioid dynamic microphone that delivers reliable, low-noise performance with exceptional clarity and definition. This model is styled in the classic fawn beige finish.

Tailored Response

Response tailored especially for vocals with high sound pressure handling capabilities.

Construction

Rugged, steel construction with low handling noise.

True Cardioid Pattern

The RE20 features a cardioid polar pattern with no coloration at 180-degrees off-axis the frequency response is nearly independent of angular location of the sound source, creating virtually no off-axis coloration, yet providing the greatest possible rejection of unwanted sounds.

Internal Windscreen

An internal blast and wind filter eliminates pop and wind noise at the closest proximity. In recording sessions or on stage, singers can " close talk" the microphone, singing with their lips almost touching the grille screen with no worry of " P-pops" or excessive sibilance.

Bass Tilt-Down Switch

The bass tilt switch corrects spectrum balance for use in long-reach situations and eliminates low frequency noise and rumble.

Flat Frequency Respone

The RE20 s flat frequency response remains flat even at extremely close proximity.

EAN: 701001000098

Cloud Microphones Cloudlifter CL-2 Mic Activator

The Cloudlifter CL-2 Mic Activator from Cloud Microphones is a compact, dual-input solution for common audio problems in the field and in the studio involving low-output passive microphones, including ribbon mics. The CL-2 uses any standard phantom-powered mixer or microphone input device to provide up to +25 dB of clean, transparent gain. This improves signal-to-noise ratio and improves the performance of passive microphone signals by driving stronger, cleaner signals over longer XLR cable runs, making them ideal for broadcast, live, and studio applications. The CL-2 is housed in a rugged steel enclosure which offers shielding and durability.

Transparent Gain

Gives passive mics up to +25 dB additional active output and keeps the direct audio path free-and- clear of transformers, capacitors, and resistors. The CL-2 houses discrete JFET circuitry that delivers clean gain while preserving the natural sonic characteristics of the source

Useful for a Variety of Applications

• Use with noisy or low-gain preamps
• Use with mixers/preamps that negatively impact the sound at higher gain settings
• Use with low-output dynamic microphones and ribbons
• Mic softer sound sources such as acoustic instruments and voice
• Use for long cable runs

Features at a Glance

• Gives passive mics up to +25 dB additional active output
• Provides 2 distinct stages of clean gain
• Easy to use self-contained design requires only phantom power
• Recommended for use with all passive dynamic microphones
• Compatible with tube, battery, or power-supply-driven microphones
• Safe for all passive ribbons with no transfer of phantom
• Utilizes Patent Pending Class-A, discrete JFET circuitry
• Ideal impedance loading for optimal performance at 3 kilohms
• Rugged, road ready, and portable, for studio, stage, and broadcasting

EAN: 094922484215

Auray SSM-BC10 Microphone Suspension Shockmount (Black Matte)

The black matte SSM-BC10 Microphone Suspension Shockmount from Auray is designed to keep your front-address microphone free from vibrations and noise that can often affect broadcast and voiceover applications. The heavy-duty bands isolate your microphone, eliminating the vibrations that can travel through your mic stand or broadcast arm.

The shockmount is equipped with a standard 5/8" -27 threaded socket and fits most mic stands and broadcast arms. Its locking knob and protective inner ring secure your mic in place while protecting its finish. The swiveling basket allows for precise microphone placement.

Eliminates Noise

The SSM-BC10 prevents unwanted vibrations that can radiate through a mic stand or broadcast arm from disrupting your broadcast or recording.

Swiveling Basket with Tension Knobs

The swiveling basket provides precise microphone positioning. Dual tension knobs maintain the angle of the microphone while still allowing smooth repositioning.

5/8" -27 Thread

The SSM-BC10 features a mic stand adapter with a standard 5/8" -27 thread that is compatible with most mic stands and broadcast arms.

Locking Knob with Inner Ring

The locking knob holds the microphone firmly in place. The inner ring applies uniform pressure to the outside of the microphone and prevents damage to the microphone finish

All-Metal Construction

The SSM-BC10 is a durable studio accessory that is built to last. The all-metal construction assures security and protection for the microphone.

Heavy-Duty Elastic Bands

The heavy-duty elastic bands suspend the microphone in the center of the basket, and prevent shocks and vibrations that can radiate through the mic stand or broadcast arm from reaching the microphone.

Black Matte Finish

Using the SSM-BC10 for on-air broadcast, the black matte finish will not reflect lights into the cameras.

For Front-Address Microphones

The SSM-BC10 fits front-address microphones such as the Electro-Voice RE20 and RE320 and the Heil Sound PR 40.

EAN: 847628585188

Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable

The Auray BAI-2X is a two-section broadcast arm with internal springs and an integrated XLR cable. This versatile and sturdy broadcast arm is great for studio as well as home use. It s ideal for broadcast, voiceover, and podcasts.

The BAI-2X broadcast arm is designed with internal springs that provide a clean and sleek look. The internal balance springs are precision engineered to support and hold in place microphones of up to 5 lb / 2.27kg. The design also minimizes handling noise when re-positioning the arm. The broadcast arm features a standard 5/8" -27 microphone stud mount that is compatible with most shockmounts and microphone clips. The angle of the microphone stud mount can be adjusted and secured with the locking knob, and the angle is maintained when re-positioning the arm. This eliminates the need to readjust it every time the arm is moved. With an extension of up to 40 inches, and the ability to rotate the arm 360° , the BAI-2X allows for precise microphone placement.

The BAI-2X also features a heavy-duty combo mount that