RODE PodMic 1-Person Podcasting Microphone Kit with Studio Boom Arm and XLR Cable (White)

PodMic 1-Person Podcasting Microphone Kit with Studio Boom Arm and XLR Cable (White) Overview

RODE PodMic Dynamic Podcasting Microphone (White)

Podcasters looking for the right mic to bring professional-quality sound to their productions on YouTube, FaceBook, Twitch, and elsewhere have a great option with the white PodMic from Rode. This cost-effective, yet stylish, end-address dynamic XLR microphone is specifically tuned for speech and broadcast. Tailor-made for use with the RODECaster Pro podcast production studio and PSA1 broadcast arm, it can also be plugged into a wide range of pro-audio gear to deliver broadcast-quality sound.

This microphone is part of the Virtual Mic Locker, an online tool to help our valued customers determine the sonic differences between popular microphones for podcasting and voice over work. Each microphone was recorded using a Grace Design M103 preamp into a Presonus Quantum 2626 interface.

Podcast in Any Environment

Most podcasts happen in bedrooms, home studios, or offices with less than perfect acoustics and noises coming from the outside. The PodMic features a dynamic capsule with a tight cardioid polar pattern, great for picking up the speaker while reducing unwanted sounds that are further away or off to the sides.

Get Close to Your Mic

With its end-address design, the PodMic invites you to get right up close and create intimate broadcast-style voice recordings with a deep and warm tone. Its compact size lets you and your guests see each other and enjoy an open and comfortable talking experience, while the mic stays out of the camera s way when videocasting.

Built to Last

Solid-brass construction with a hard-wearing matte-black ceramic finish ensures that the PodMic will continue to deliver the same level of performance over the years, while still looking great.

Clean Speech without Distractions

The PodMic s internal pop filter and double-mesh housing work to effectively reduce distracting breath and plosive noises (as in s, p, and b sounds) without the need for an unsightly external pop filter.

Protect Your Sound from Vibrations

The internal shockmount helps to isolate the PodMic from handling noise and vibrations when you are adjusting the mic or if there s a bump or knock on the table. The integrated swing mount that holds the mic further insulates it from low-frequency noises, which could ruin your audio.

Swing into the Right Position

The PodMic has two wing nuts on each side of its built-in mount, allowing you to quickly swing the mic into the right orientation and lock it into place. Mounting the PodMic on the PSA1 broadcast boom arm (available separately) gives you the added flexibility to position the microphone exactly where you want it.

Get Professional Results

Pair the PodMic with the powerful RODECaster Pro podcast production studio to leverage the most out of your microphone. Select the PodMic microphone preset in the RODECaster Pro audio options and matching digital signal processing is automatically applied, giving your voice the depth, presence, and hint of shimmer associated with top professional radio broadcasters.

RODE PSA1+ Professional Studio Arm (White)

Experience smooth, silent, and versatile mic positioning in your podcast setup, voiceover studio, and livestream work with the white Rode PSA1+ pro studio arm. This two-section boom arm rotates a full 360 degrees and features a maximum reach of 37" horizontal and 34" vertical, ensuring you ll always be able to put the mic in the perfect spot while expending minimal effort.

Whether attached to a table via the supplied C-clamp or installed in a surface using the included threaded desk insert, the PSA1+ can support microphones weighing up to 2.7 pounds even large broadcast mics are no problem for the PSA1+ arm. It comes with a 3/8 to 5/8" adapter to allow compatibility with most microphones and shockmounts on the market, and it boasts integrated cable management that ll keep your existing USB or XLR cable from becoming an unruly and unsightly mess.

Holds Popular Rode Microphones

The PSA1+ is compatible with all Rode mics and shockmounts excluding lavalier, mobile, wireless, and headset microphones and the SM5 shockmount.

• PodMic
• Podcaster
• Procaster
• Broadcaster
• NT1
• NT1-A
• NT-USB
• NT-USB Mini
• VideoMic NTG
• XDM-100
• XCM-50

Supports Heavy Mics

With a load capacity ranging from 0.2 to 2.7 lb, the PSA1+ is more than capable of accommodating most microphones whether small and light or large and hefty. It features a 3/8" thread and includes a 5/8" adapter to ensure compatibility with the vast majority of mics, clips, and mounts.

Smooth, Silent Mic Positioning

Thanks to its silent operation and 360 degrees of rotation, the PSA1+ allows effortless and thoroughly versatile positioning of your microphone. Considering its horizontal reach of 37" and vertical reach of 34" , you ll have no problem putting the mic right where you need it.

Integrated Cable Management

The PSA1+ features integrated cable management with external clips to keep your cable run neat and orderly. Plus, it accommodates USB or XLR cables, so it s sure to work with your digital or analog microphone cable.

Multiple Mounting Options

To enable optimal mounting to a desk or table, the PSA1+ is supplied with a C-clamp and a threaded desk insert. The clamp can attach to surfaces up to 2.2" thick, while the desk insert works with surfaces up to 2.7" thick.

EAN: 698813010806

RODE XLR Male to XLR Female Cable (Black, 9.8 )

This black, 9.8 XLR Male to XLR Female Cable from RODE is part of their color coordinated XLR cable set designed to speed up your workflow and make it easy to quickly track down and resolve any potential problems so you can get back to creating. The 9.8 length makes the cable well suited for a wide variety of tasks, including recording, podcasting, and streaming applications.

EAN: 698813009930