Shure Dual Microphone Holder for SM57
Shure s Dual Microphone Holder for SM57 holds two SM57 microphones that can be mounted horizontally or vertically on a lectern or microphone stand.
EAN: 042406403894
Shure Dual Microphone Mount A26M
The Shure Dual Microphone Mount A26M is a mount designed specifically for use with Shure 545 Series, SM57 and Beta 57A microphones. Take advantage of this dual mount s unique design, which allows you to use two microphones in a single mount.
Double Mounting
Take advantage of this model s unique design to mount two Shure 545 Series, SM57, or Beta 57A microphones with one mount.
EAN: 042406053006
Shure A26X Extension Tube for Desk Stands - Measures: 3" (7.62 cm)
The Shure A26X 3-Inch Extension Tube for Desk Stands provides additional height for desktop recording. It also adapts Shure s Beta 56 microphone to various mounting devices.
EAN: 042406056601
Shure A13HD Heavy-Duty Mounting Flange for Gooseneck and Shaft Microphone Mounts (Matte Black)
The Shure A13HD is a heavy-duty microphone stand, mounting flange designed for flush-mounting into desktops, podiums, etc. The A13HD features a 5/8" -27 threaded fitting for compatible goosenecks, microphone mounting shafts, etc.
EAN: 042406053716
Shure A81WS - Large Foam Windscreen for the Shure SM81 and SM57 Microphones
Large foam windscreen for Shure SM81 and SM57 microphones.
EAN: 042406056649
Shure A2WS - Windscreen for SM57, SM77 & 545 Series Handheld Microphones (Gray)
Standard windscreen for Shure SM57, SM77 and 545 series handheld microphones. Color, Gray.
EAN: 042406112413
Shure C25E 25 Triple-Flex Balanced Microphone Cable
The C25E 25 Triple-Flex Balanced Microphone Cable from Shure is a double-wrapped, shielded cable for microphones. It features Switchcraft connectors with a black finish on the microphone end. The cable has a 3-pin XLRM connector on one end and a 3-pin XLRF connector on the other. It is designed for low-impedance operation.
EAN: 042406052450
Shure SM57-LC Dynamic Instrument Microphone Specs
Microphone
| Form Factor | Handheld / Stand/Boom Mount |
| Intended Sound Sources | Vocals, Instrument |
| Sound Field | Mono |
| Operating Principle | Pressure Operated |
| Capsule | 1 x Dynamic |
| Polar Pattern | Cardioid |
| Pad | None |
| High-Pass Filter | None |
| Tone Adjustment | None |
| Gain Adjustment | None |
| Indicators | None |
| On-Board Controls | None |
| Windscreen | Foam (Available Separately) |
Performance
| Frequency Range | 40 Hz to 15 kHz |
| Impedance | 150 Ohms |
| Load Impedance | 310 Ohms |
| Sensitivity | 56 dBV/Pa (1 kHz, Open Circuit Voltage) |
Connectivity
| Headphone Connector | None |
Physical
| Color | Gray |
| Mounting | Mic Clip/Stand Adapter (Included) |
| Included Case | Zipper Pouch |
| Included Filters | None |
| Construction Material | Steel, Steel Wire Grille |
| Dimensions | : 1.3 x L: 6.2" / : 3.2 x L: 15.7 cm |
| Weight | 10.02 oz / 284 g |
Packaging Info
| Package Weight | 1.25 lb |
| Box Dimensions (LxWxH) | 10.1 x 4.95 x 3.45" |
Shure Dual Microphone Holder for SM57 Specs
Packaging Info
| Package Weight | 0.61 lb |
| Box Dimensions (LxWxH) | 6.8 x 4.7 x 3.4" |
Shure Dual Microphone Mount A26M Specs
Packaging Info
| Package Weight | 0.44 lb |
| Box Dimensions (LxWxH) | 5.6 x 3.7 x 3.2" |
Shure A26X Extension Tube for Desk Stands - Measures: 3" (7.62 cm) Specs
Packaging Info
| Package Weight | 0.1 lb |
| Box Dimensions (LxWxH) | 9.4 x 8.1 x 0.7" |
Shure A13HD Heavy-Duty Mounting Flange for Gooseneck and Shaft Microphone Mounts (Matte Black) Specs
Packaging Info
| Package Weight | 0.5 lb |
| Box Dimensions (LxWxH) | 5 x 5 x 3" |
Shure A81WS - Large Foam Windscreen for the Shure SM81 and SM57 Microphones Specs
| Material | Foam |
Packaging Info
| Package Weight | 0.265 lb |
| Box Dimensions (LxWxH) | 8.85 x 4.35 x 4.35" |
Shure A2WS - Windscreen for SM57, SM77 & 545 Series Handheld Microphones (Gray) Specs
| Material | Foam |
Packaging Info
| Package Weight | 0.13 lb |
| Box Dimensions (LxWxH) | 7 x 5.2 x 2.2" |
Shure C25E 25` Triple-Flex Balanced Microphone Cable Specs
| Type | Triple-flex, double-wrapped, shielded cable |
| Connector 1 | 3-pin XLRM |
| Connector 2 | 3-pin XLRF |
| Cable Length | 25` (7.6 m) |
| Weight | Not specified by manufacturer |
Packaging Info
| Package Weight | 0.785 lb |
| Box Dimensions (LxWxH) | 9.2 x 6.5 x 1" |
In the Box
- Shure A25DM Mic Stand Adapter
- Padded Bag
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
- Dual Microphone Mount
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
No posts found
