Shure MV7+ Podcast XLR/USB Microphone Kit with Broadcast Arm (Black)

Shure MV7 Overview

Shure MV7+ Podcast XLR/USB Microphone (Black)

The Shure MV7+ Podcast Mic, styled here in black, makes getting a professional podcast sound easier than ever. Like the original MV7, the MV7+ is a high-quality, broadcast-style dynamic microphone that delivers a clear and present sound and features both a conventional XLR connection and a USB port, allowing you to use it with audio interfaces, mixers, hard disk recorders, or direct to computers and mobile devices. But this updated " +" version adds several key features to improve your podcasting experience, including a customizable full-color LED touch panel with metering, improved DSP functions for better sound quality with less noise, 3 reverb options, a USB-C connector, and deep integration with Shure s MOTIV Mix software for complete control over a wide range of sound-sculpting parameters.

What s New?

• Multicolor LED touch panel: add vibrant color to your sound with the LED touch panel. Select from 16.8 million hues and use it as an audio level meter or switch on an eye-catching pulse effect. Don t want a constant hot mic? Instantly mute the MV7+ by tapping anywhere on the LED panel.
• Real-time Denoiser: cutting-edge DSP technology eliminates ambient noise in your room and complements the mic s Voice Isolation Technology to ensure you sound great, even in imperfect recording conditions.
• Digital Popper Stopper: a virtual pop filter removes harsh plosive sounds, so you can avoid acoustic distractions on your audio tracks and a physical pop filter on camera when you re filming.
• Improved Auto-Level mode: the improved Auto-Level function adjusts your mic s gain based on distance, volume, and spatial detection for optimized audio levels.
• Onboard Reverb: 3 types of onboard reverb settings (Plate, Hall, and Studio) provide enhanced depth and richness in music recordings.
• Hybrid XLR and USB-C outputs: the dual options provide easy connectivity no matter the recording setup you re using. The micro-USB connector from the MV7 has been upgraded to a USB-C connector on the MV7+.
• MOTIV Mix integration: MOTIV Mix software is the key to unlock powerful onboard DSP features in every MV7+ when using the USB-C output. Configure and set up your microphone to personalize the vibrant LED touch panel and optimize mic settings, including the sound signature, gain, EQ, compressor, limiter, and more. Save presets for instant recall of settings.

Legendary Broadcast Sound

The mic takes its design and sonic cues from the Shure SM7B, a classic used on countless podcasts and radio broadcasts. Use the mic in close proximity to your voice and you ll find it exhibits a clear, intelligible, and high-quality sound. The frequency response is optimized for a rich and natural vocal reproduction. The MV7+ is also very well suited to vocalists and musicians, handling SPLs up to 128 dB and delivering a wide 50 Hz to 16 kHz frequency response.

Works with Your Analog or Digital Setup

Thanks to its multiple outputs, you can use this mic with nearly any podcasting setup. The mic works with your audio interface, field recorder, mixer, or computer (over USB-C) as well as select Android devices and iOS devices. The device is also MFi-certified.

Rugged Appointments for Sound and Use

The included foam windscreen has been extended to introduce an airgap for improved protection against plosives and p-pops, greatly simplifying your editing process. With its built-in ready-to-mount yoke, the mic offers a build quality that is rugged, with an all-metal construction for reliability in mission-critical circumstances.

Unidirectional Polar Pattern for the Untreated Room

The mic features a unidirectional cardioid polar pattern, which is the best natural defense against room noise: since the capsule mostly captures what s directly in front of it, you won t pickup as much room noise as you would with an omnidirectional mic. Depending on your particular room, you may still need a little room treatment, or use the mic s noise-reduction software, to address issues such as your computer s hum or your air conditioner but the chances of that are markedly lower with a cardioid polar pattern.

Integrated Controls & High-Quality USB Audio

On the USB side, the mic provides broadcast-quality specs and intuitive functionality. Capture audio at sample rates and resolutions up to 48 kHz / 24-bit, which is the standard for editing and mixing broadcast audio. Use the integrated touch-panel interface on the mic itself to control levels, headphone volumes, monitor mix, and mic-mute.

Built-In 3.5mm Headphone Monitoring with Mix Control

The mic offers a headphone jack for monitoring. Just plug a pair of headphones into the MV7+ s 3.5mm jack, and you ll be able to listen to your high-quality audio in all its glory. Mix your mic output and system audio playback levels individually with dedicated sliders in the MOTIV Mix desktop app.

Auray BAI-2N Two-Section Broadcast Arm with Internal Springs

The Auray BAI-2N is a two-section broadcast arm with internal springs . This versatile and sturdy broadcast arm is great for studio as well as home use. It s ideal for broadcast, voiceover, and podcasts.

The BAI-2N broadcast arm is designed with internal springs that provide a clean and sleek look. The internal balance springs are precision engineered to support and hold in place microphones of up to 5 lb / 2.27kg. The design also minimizes handling noise when re-positioning the arm. The broadcast arm features a standard 5/8" -27 microphone stud mount that is compatible with most shockmounts and microphone clips. The angle of the microphone stud mount can be adjusted and secured with the locking knob, and the angle is maintained when re-positioning the arm. This eliminates the need to readjust it every time the arm is moved. With an extension of up to 40 inches, and the ability to rotate the arm 360° , the BAI-2N allows for precise microphone placement.

The BAI-2N also features a heavy-duty combo mount that consists of a sturdy C-clamp and a heavy-metal desktop mount. The C-clamp is capable of fastening onto desktops up to 2.3" thick. The C-clamp s slim design minimizes the clearance needed to mount it between a desk and wall. The desktop mount detaches from the C-clamp and provides the option of permanent installation to a desktop with the mounting screws (included). A 14" riser is included for adding height to the broadcast arm in order to extend over computer or studio monitors.

Versatile

Ideal for studios as well as home use

Internal Springs

Internal springs provide smooth, noise-free positioning and clean and sleek profile

Sturdy

Supports microphones up to 5 lb / 2.27kg

Compatibility

The 5/8" -27 standard microphone thread is compatible with most shockmounts and microphone clips

Precision

Extends up to 40" / 101.6cm and rotates 360° allowing for precise microphone placement

Extra Height

A 14" / 13.6cm riser is included. It provides extra height to the broadcast arm for extending over computer or studio monitors

Combo Mount

The heavy-duty combo mount is comprised of a C-clamp for clamping to a desktop up to 2.3" / 5.8cm thick, and a detachable desktop mount for permanent attachment to a desktop with the included screws

14" Riser

The included riser adds 14" / 13.6cm of height to the broadcast arm so that it can easily extend over computer or studio monitors

EAN: 847628578289