Shure SM7dB Dynamic Vocal Microphone and Broadcast Arm Kit

Shure SM7DB Overview

Shure SM7dB Vocal Microphone with Built-In Preamp

A Proven Performer, Now with More Output Gain

The black Shure SM7dB is an updated version of the SM7B, featuring a built-in preamp for a more robust output level, eliminating the need for an inline preamp. The SM7dB offers the same smooth, flat, and wide-range frequency response for music and speech that made the original a popular choice for professional audio applications. The mic's specially engineered dynamic capsule provides a smooth, polished vocal sound with a rich response in the lower frequency registers, making the mic a favorite among broadcasters and podcasters.

Broadcast-Quality Sound

The SM7dB features a cardioid polar pattern, bass roll-off, and midrange emphasis (presence boost) controls as well as shielding against broadband interference. An internal air suspension shock isolation helps to eliminate mechanical noise transmission, and a yoke mount facilitates mounting and provides precise control of the mic position.

Built-In Preamp

The SM7dB features a built-in preamp that is powered via 48V phantom power. The preamp can be set for +18, +28 dB, or removed from the circuit entirely via the true-bypass switch.

Cardioid Polar Pattern

The classic cardioid pickup pattern is designed to reject off-axis audio, so you can sing or speak at a comfortable angle. And, it captures the sound with minimum coloration, isolating the signal source, which helps to reduce feedback issues.

Rejection of Electromagnetic Hum

Improved rejection of electromagnetic hum-optimized for shielding against broadband interference emitted by computer monitors.

Air Suspension Shock Isolation

Internal air suspension shock isolation virtually eliminates mechanical-noise transmission.

Pop Filter

The detachable close-talk windscreen eliminates the need for any add-on protection against explosive breath sounds-even for close-up vocals or narration.

Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable

The Auray BAI-2X is a two-section broadcast arm with internal springs and an integrated XLR cable. This versatile and sturdy broadcast arm is great for studio as well as home use. It's ideal for broadcast, voiceover, and podcasts.

The BAI-2X broadcast arm is designed with internal springs that provide a clean and sleek look. The internal balance springs are precision engineered to support and hold in place microphones of up to 5 lb / 2.27kg. The design also minimizes handling noise when re-positioning the arm. The broadcast arm features a standard 5/8" -27 microphone stud mount that is compatible with most shockmounts and microphone clips. The angle of the microphone stud mount can be adjusted and secured with the locking knob, and the angle is maintained when re-positioning the arm. This eliminates the need to readjust it every time the arm is moved. With an extension of up to 40 inches, and the ability to rotate the arm 360° , the BAI-2X allows for precise microphone placement.

The BAI-2X also features a heavy-duty combo mount that consists of a sturdy C-clamp and a heavy-metal desktop mount. The C-clamp is capable of fastening onto desktops up to 2.3" thick. The C-clamp's slim design minimizes the clearance needed to mount it between a desk and wall. The desktop mount detaches from the C-clamp and provides the option of permanent installation to a desktop with the mounting screws (included). A 14" riser is included for adding height to the broadcast arm in order to extend over computer or studio monitors.

Versatile

Ideal for studios as well as home use

Internal Springs

Internal springs provide smooth, noise-free positioning and clean and sleek profile

Sturdy

Supports microphones up to 5 lb / 2.27kg

Compatibility

The 5/8" -27 standard microphone thread is compatible with most shockmounts and microphone clips

Precision

Extends up to 40" / 101.6cm and rotates 360° allowing for precise microphone placement

XLR Cable

The integrated 15-foot XLR cable provides a secure, locking connection and excellent signal transfer

Extra Height

A 14" / 13.6cm riser is included. It provides extra height to the broadcast arm for extending over computer or studio monitors

Combo Mount

The heavy-duty combo mount is comprised of a C-clamp for clamping to a desktop up to 2.3" / 5.8cm thick, and a detachable desktop mount for permanent attachment to a desktop with the included screws

14" Riser

The included riser adds 14" / 13.6cm of height to the broadcast arm so that it can easily extend over computer or studio monitors

EAN: 847628578272