Electro-Voice Electrovoice RE50B Mobile Interviewer Kit

The Electrovoice RE50B Mobile Interviewer Kit is a microphone, audio interface, and cable setup designed to provide high-quality speech reproduction and compact portability for correspondents, interviewers, and hosts using using a smartphone, camera, or computer. It includes the Electro-Voice RE-50B handheld dynamic microphone, an IK Multimedia iRig Pre 2 Ultracompact XLR Microphone Interface, and an XLR microphone cable.

Electro-Voice RE50B - Omnidirectional Dynamic Shockmounted ENG Microphone (Black)

Every day, for local, national and international news reports, the Electro-Voice RE50B gathers the audio for news interviews. Designed specifically as an ENG/EFP interview microphone, the RE50B s custom Dyna-Damp " mic-within-a-mic" shockmount provides extremely low handling noise for clear sound. A large, built-in Acoustifoam filter keeps wind and P-pop noise to an absolute minimum, indoors or out. Frequency response is 80 Hz to 13 kHz.

Industry standard news interview microphone

Features EV Dyna-Damp shockmount

Extremely low handling noise for clear sound

" Mic-within-a-mic" concept reduces wind and vocal plosive sounds

EAN: 701001010905

IK Multimedia iRig Pre 2 Ultracompact XLR Microphone Interface

Equipped with the IK Multimedia iRig Pre 2 Ultracompact XLR Microphone Interface, you can easily record your favorite dynamic or condenser microphone to a smartphone, tablet, camera, or computer while keeping your setup simple and small. The included AA batteries power the iRig Pre 2 for up to 20 hours, so you can knock out podcasts, vocal parts, interviews, or instrument performances no matter where you are.

Simply hook up any microphone to the XLR input (engage phantom power for condenser mics) and connect the 3.5mm TRRS mini plug on the attached 15.7" cable to your mobile device, DSLR camera, or laptop. The iRig Pre 2 s auto-sensing output circuit ensures compatibility with TRRS headset ports and TRS mic inputs. Plus, the level-adjustable headphone out and switchable direct monitoring allow convenient real-time audio checks. Other enhancements over the original iRig Pre include a soft-touch exterior, numbered gain and headphone level dials, and larger LED indicators.

iRig Pre 2 vs iRig Pre

• iRig Pre 2 s new auto-sensing output circuit lets it connect to a mobile device s TRRS headset jack or to a DSLR camera s TRS mic input jack
• iRig Pre 2 adds a stylish, soft-touch finish
• Both the adjustable input gain and headphone output now offer numbered level controls for precise control
• A new direct monitor switch lets you monitor the input signal directly, avoiding latency and letting you monitor in real time with any app or device
• Two AA batteries (included) take the place of the previous 9V, providing power to the iRig Pre 2 as well as enabling +48V phantom power for condenser microphones

All Powered Up

iRig Pre 2 s two AA batteries provide true +48V phantom power for around seven hours of continuous usemany other mobile micpreamps only offer 32V, degrading your mic s performance

To use your favorite dynamic or ribbon mic, simply turn off the phantom power, and you re good to go for even longerup to 20 hours.

Don t Waste a Take

A time-saving 3.5mm headphone output now offers direct monitoring, so you can listen to ensure the signal is perfect before you start recording or streaming. It s ideal for today s popular livestreaming and video recording apps, so you can hop from app to app with confidence.

For DSLRs and digital cameras, it makes set up a snap without needing to dive into menus or set up alternate workarounds to monitor the sound.

Works in More Situations

You can easily access your favorite apps while recording or performing, by mounting the iRig Pre 2 to your mic stand or other convenient stage location using the included hook-and-loop strip slot. For secure mic stand mounting for your connected smartphone or tablet, check out the IK Multimedia iKlip series (available separately), which offers a choice of flexible mounting options for a variety of scenarios.

Ready for Recording

Even if you™ re new to mobile audio and video creation, you can get started right away by simply downloading two free IK Multimedia apps from the App store or Google Play.

• iRig Recorder FREE: An easy-to-use audio and video recording/editing app
• VocaLive FREE: A premium vocal processor for live performance and multitrack recording

Kopul Studio Elite 4000 Series Neutrik XLR M to XLR F Microphone Cable (10 , Black)

The Kopul Studio Elite 4000 Series XLR M to XLR F Microphone Cable (10 ) is a studio-quality cable for connecting mics to mixers, preamps, audio interfaces and recorders or to be used in any other application where XLR connectivity is required. The cable is engineered to be both quiet and durable, and is well-suited for critical recording and broadcast situations.

Studio Elite 4000 Series cables are made from 24 AWG OFC copper wire that s wrapped with PE insulation and a conductive PVC inner shield. A cotton-yarn inner layer helps reduce electrostatic and microphonic noise. A 98% braided outer shield makes the cable resistant to EMI and RFI noise. The Neutrix XX silver connectors provide a high level of connectivity, and all the solder connections are shrink-wrapped for protection.

98% braided shield offers protection from EMI and RFI noise.

Twin-conductive PVC inner shielding provides 100% coverage of the core conductor. It helps keep the cable s signal from radiating and affecting nearby cables, and also helps prevent external EMI from penetrating to the cable s core.

24 AWG oxygen-free stranded copper inner core provides the best possible conductivity.

Cotton yarn reduces electrostatic and microphonic noise.

All solder points shrink-wrapped for protection.

Neutrik XX silver connectors offer high conductivity.

Cast zinc shell and chuck style strain relief.

EAN: 847628551176