EAN: 885038003113
The AKG HM 1000 Ceiling Mount is designed to mount the AKG CK 31, CK 32, CK 33, CK 47 and CK 80 microphone capsules from high ceilings in theaters, concert halls, houses of worship, lecture halls and anywhere hanging is desired. The mount includes a 33 (10m) long, specially treated cable that avoids twisting and a spring-loaded, steel hanging clamp for exact microphone positioning. An LED ring illuminates to indicate power.
Hanging module with rugged thread connection and self-cleaning, gold plated contacts
For use with five different capsule modules
Integrated switchable LED ring
Integrated bass rolloff filter
Rugged all-metal construction
Non-reflective anthracite finish
AKG CK31 Cardioid Microphone Capsule for DAM Series Mounting Modules
EAN: 885038003021
The AKG CK31 is a cardioid microphone capsule designed for use with the DAM (Discreet Acoustics Modular) Series mounting modules. The cardioid polar pattern minimizes noise and ambiance at the off-axis (sides) of the microphone. The result increases directivity and provides high gain-before-feedback response when using near speakers or monitors.
The wide frequency response of 50 Hz to 20 kHz minimizes low-frequency noise caused by wind and proximity effect while reproducing audio signal with great accuracy and rich detail. The module design allows quick and easy capsule replacement for added flexibility. The package includes a special two-part windscreen, which efficiently reduces wind and pop noise.
Modular Design
The CK31 is designed with gold-plated contacts with deep threads for use with the DAM (Discreet Acoustics Modular) Series mounting modules. The modular design offers quick capsule replacement and enhances flexibility.
Cardioid Polar Pattern
The cardioid polar pattern minimizes noise and ambient audio signal at the off-axis (sides) of the microphone capsule.
Wide Frequency Response
The wide frequency response of 50 Hz to 20 kHz offers smooth, accurate audio reproduction while minimizing low-frequency noise.
Dual-Layer Wind Protection
The included dual-layer windscreen provides a primary layer, which disperses the incoming wind stream while the second layer further diffuses wind flow before reaching the diaphragm.
AKG HM 1000 Ceiling Hanging Module for CK Series Microphone Capsules Specs
Microphone
Form Factor | Hanging |
High-Pass Filter | 250 Hz |
Tone Adjustment | Low Cut: -10 dB at 50 Hz |
Performance
Impedance | 600 Ohms |
Connectivity
Analog Output | 1 x XLR 3-Pin Male |
Cable Length | 32.8` / 10 m |
Power
Operating Current Consumption | 2 mA |
Physical
Color | Black |
Mounting | Hanging |
Weight | 14.1 oz / 400 g |
Packaging Info
Package Weight | 1.09 lb |
Box Dimensions (LxWxH) | 11.7 x 5.2 x 3.25" |
AKG CK31 Cardioid Microphone Capsule for DAM Series Mounting Modules Specs
Polar Pattern | Cardioid |
Frequency Response | 50 Hz to 20 kHz |
Dynamic Range (Typical) | not specified by manufacturer |
Signal-to-Noise Ratio | 73 dB (A-weighted) |
Maximum Input Sound Level | 125 dB (1% THD) |
Power Requirements | 9 to 52 Volts Phantom Power to IEC 61938 (requires DPA-P or DPA adapter included in GN and HM 1000 series modules) |
Output Impedance | < 600 Ohms |
Rated Load Impedance | > 2 kOhms |
Output Connectors | Threaded termination for use with GN and HM Series modules |
Low Frequency Roll-Off | No |
Dimensions | 0.8 x 0.5" / 20.0 x 13.5 mm |
Weight | 0.2 oz / 5.0 g |
Packaging Info
Package Weight | 0.345 lb |
Box Dimensions (LxWxH) | 6.6 x 4.95 x 2.45" |
In the Box
- 33` (10m) Hanging Cable
- Spring-Loaded Steel Clip
- 2-Year Manufacturer Warranty
- AKG W30 Foam Windscreen for CK31/ CK32/ CK33
- 2-Year Manufacturer Warranty
No posts found