features the AKG D112 MKII dynamic microphone with a short boom stand and an XLR mic cable. Tailored for use on kick drums and bass guitar speaker cabinets in the studio or on stage, the D112 MKII utilizes a large-diaphragm cardioid element and a bass resonance volume chamber to deliver a crisp, punchy sound with solid low-end below 100 Hz and a presence boost at 4 kHz. It can handle extremely high SPLs up to 160 dB without distortion while the hum-compensation coil keeps noise levels low. Thanks to its rugged construction with integrated swivel mount, the mic is equally ready for the road as it is for life in a studio environment.
AKG D112 MKII Pro Dynamic Bass Microphone
The AKG D112 MKII Pro Dynamic Bass Microphone is a descendant of AKG s D112 and earlier D12 dynamic microphone, and is widely known for its ability to handle high-level signals from bass drums and bass guitars in the studio. The microphone has been designed with a low resonance frequency and can handle very high transient signals with low distortion. It has a large dynamic range with a high signal-to-noise ratio and the capacity to input high sound levels without distorting. High frequency response has been tailored to keep both bass drum and bass guitar clearly distinguishable in the mix. A built-in windscreen makes the D112 also suitable for high SPL instruments such as the trombone and tuba.
Cardioid-pattern microphone
Built-in swivel mount
Response tailored for bass guitar and bass drum pickup, both in the studio and on-stage
Response maintained down to 20 Hz
Built-in windscreen
EAN: 885038038207
Auray MS-5340 Podcasting Microphone Stand with Boom (Black)
Designed for miking kick drums or guitar amplifier cabinets in both studio and live applications, the black MS-5340 Kick Drum/Guitar Amp Microphone Stand with Boom from Auray is also ideal for podcasting applications and provides sturdy operation thanks to its steel construction and weighted square base with 5 rubber non-slip feet. Its telescoping shaft provides height adjustment between 9.5 and 14.3" , while its adjustable boom is 19.5" in length, both adding to the versatility of placement options the stand provides. The stand is compatible with standard 5/8" -27 threaded mic clips and mounts, and includes a cable guide to help reduce cable clutter.
Telescoping Shaft and Adjustable Boom
The telescoping shaft, along with the adjustable boom and boom clutch enable the stand to be angled or extended for exact microphone placement
Weighted Base
The weighted base helps ensure keep the stand firmly in place
Non-Slip Feet
5 non-slip feet help reduce unwanted vibrations from reaching your microphone
Square Shape
The square shape of the weighted base allows for close placement to kick drums and guitar amp cabinets
Durable Steel Construction
This sturdy microphone stand will withstand the most demanding studio and concert environments
5/8" -27 Standard Microphone Thread
The standard 5/8" -27 threaded stud will fit most microphone clips
EAN: 847628578227
Kopul Studio Elite 4000 Series Neutrik XLR M to XLR F Microphone Cable (20 , Black)
The Kopul Studio Elite 4000 Series XLR M to XLR F Microphone Cable (20 ) is a studio-quality cable for connecting mics to mixers, preamps, audio interfaces and recorders or to be used in any other application where XLR connectivity is required. The cable is engineered to be both quiet and durable, and is well-suited for critical recording and broadcast situations.
Studio Elite 4000 Series cables are made from 24 AWG OFC copper wire that s wrapped with PE insulation and a conductive PVC inner shield. A cotton-yarn inner layer helps reduce electrostatic and microphonic noise. A 98% braided outer shield makes the cable resistant to EMI and RFI noise. The Neutrix XX silver connectors provide a high level of connectivity, and all the solder connections are shrink-wrapped for protection.
98% braided shield offers protection from EMI and RFI noise.
Twin-conductive PVC inner shielding provides 100% coverage of the core conductor. It helps keep the cable s signal from radiating and affecting nearby cables, and also helps prevent external EMI from penetrating to the cable s core.
24 AWG oxygen-free stranded copper inner core provides the best possible conductivity.
Cotton yarn reduces electrostatic and microphonic noise.
All solder points shrink-wrapped for protection.
Neutrik XX silver connectors offer high conductivity.
Cast zinc shell and chuck style strain relief.
EAN: 847628551190
AKG D112 MKII Pro Dynamic Bass Microphone Specs
Microphone
Operating Principle | Pressure Gradient |
Capsule | Dynamic |
Polar Pattern | Cardioid |
Performance
Frequency Range | 20 Hz to 17 kHz |
Impedance | 210 Ohms |
Connectivity
Analog Output | 1 x XLR 3-Pin |
Physical
Dimensions | H: 2.8 x W: 5.9 x L: 4.5" / H: 70 x W: 150 x L: 115 mm |
Weight | 9.9 oz / 380 g |
Packaging Info
Package Weight | 1.705 lb |
Box Dimensions (LxWxH) | 9.25 x 8.2 x 3.9" |
Auray MS-5340 Podcasting Microphone Stand with Boom (Black) Specs
Stand
Height | 9.5 to 14.3" / 24.1 to 36.3 cm |
Base Type | U-Base |
Base Dimensions | 6 x 3.5" / 15.3 x 3.5 cm |
Boom
Length | 19.5" / 49.5 cm |
General
Mounting Thread | 5/8"-27 Male |
Weight | 5.4 lb / 2.4 kg |
Packaging Info
Package Weight | 6.2 lb |
Box Dimensions (LxWxH) | 20.5 x 4.3 x 3" |
Kopul Studio Elite 4000 Series Neutrik XLR M to XLR F Microphone Cable (20`, Black) Specs
Connector 1 | XLR 3-Pin Male |
Connector 2 | XLR 3-Pin Female |
Cable Length | 20` / 6.1 m |
Shielding | 98% Braid |
Wire Gauge | 24 AWG |
Contact Plating | Silver |
Packaging Info
Package Weight | 0.9 lb |
Box Dimensions (LxWxH) | 11 x 10.2 x 1.15" |
In the Box
- 2-Year Manufacturer Warranty
- Cable Guide
- 2-Year Manufacturer Warranty
- 3-Year Manufacturer Warranty
No posts found