Capture the full, rich sound of your kick drum accurately with the 4055 Kick Drum Microphone from DPA. Unlike other bass drum mics that are tailored to emphasize certain frequencies for specific genres, the 4055 aims for a more linear response with only a subtle 6 dB boost in the 10 kHz range. This more sonically neutral approach captures the true sound of the drum, letting you add your own EQ, if necessary, to work within the context of your mix.
The package includes the UA0961 microphone holder, and the asymmetrical design makes it easy to place the mic inside or outside of the kick drum. Slide the mic into the bass drum for more attack or place it just outside the hole for maximum subs and bottom-end. The linear on- and off-axis response provide a round yet tight sound with extended low end and detailed mid and high frequencies. Robust housing protects the mic from even the most aggressive performers, while wind-damping foam behind the capsule protects the microphone element and keeps excess air noise in check.
At a Glance
- Picks up the clear, true sound of the kick drum
- Flat frequency response, so you can shape the sound your way
- Built tough to withstand rough use on the live stage
- Asymmetric design for easy placement inside or outside the kick drum
- Open cardioid pickup pattern
- 40 Hz to 18 kHz effective frequency range with 6 dB soft boost at 10 kHz
- 132 dB dynamic range
- 164 dB maximum input SPL (at 10% THD)
- Requires 48V phantom power
DPA Microphones 4055 Specs
Microphone
Form Factor | Stand/Boom Mount |
Intended Sound Sources | Kick Drum |
Sound Field | Mono |
Operating Principle | Pressure Gradient |
Capsule | 1 x Electret Condenser |
Polar Pattern | Open Cardioid |
Pad | None |
High-Pass Filter | None |
Tone Adjustment | None |
Gain Adjustment | None |
Indicators | None |
Windscreen | Built-In, Foam |
Performance
Frequency Range | 40 Hz to 18 kHz |
Maximum SPL | 164 dB SPL |
Impedance | 380 Ohms |
Load Impedance | 2 Kilohms |
Sensitivity | -54 dB |
Dynamic Range | 132 dB (Typical) |
Equivalent Noise Level | 39 dB (Typical) |
THD | < 1% |
CMRR | 55 dB |
Connectivity
Headphone Connector | None |
Power
Operating Voltage | 48 V (Phantom Power) |
Operating Current Consumption | 2 mA |
Physical
Color | Black |
Mounting | Mic Clip/Stand Adapter (Included) |
Mounting Thread Size | Not Specified by Manufacturer |
Included Case | Zipper Pouch |
Included Filters | None |
Operating Temperature | -40 to 113°F / -40 to 45°C |
Operating Humidity | 90% |
Dimensions | : 2.2 x L: 5.2" / : 57 x L: 132 mm |
Weight | 8.5 oz / 241 g |
Packaging Info
Package Weight | 1.385 lb |
Box Dimensions (LxWxH) | 9.5 x 5.7 x 2.7" |
In the Box
- DPA Microphones 4055 Kick Drum Microphone with Holder
- 5-Year Manufacturer Warranty
No posts found