The loud SPL Core 4099 Instrument Microphone from DPA is a supercardioid microphone with a 5.5 gooseneck that is designed to capture audio in a variety of applications: from piano to guitar, strings to woodwinds, or brass to percussion instruments. You can move the mic to another instrument by using the designated clip (sold separately) to mount it correctly. The Core amplifier technology offers an increased performance and natural sound across the entire dynamic range. Furthermore, the supercardioid polar pattern allows the microphone to reject unwanted noise and accurately capture the true voice of your acoustic instrument. The Core 4099 requires a cable and adapter (sold separately).
Core by DPA technology inside
Supercardioid condenser microphone
Handles high SPLs
Superior gain-before-feedback
Flexible and easy mounting with a wide variety of instrument clips (available separately)
Gentle and easy to mount on the instrument
Versatile 5.5 gooseneck
DPA Microphones VC4099 Violin Mounting Clip for 4099 Microphone
The DPA VC4099 Violin Mounting Clip is designed to mount the DPA 4099 onto violins, mandolins, banjos, etc.
DPA Microphones DAD6001 Microdot to 3-Pin XLR Adapter with Belt Clip
The DPA DAD6001 is an adapter featuring XLR and Microdot connections allowing you to attach a miniature DPA microphone to a preamp, mixer, camera, or similar device able to supply phantom power.
The adapter is functional at 12V, but requires 48V for the connected mic to reach full specifications. The active-signal balanced wiring allows for longer cable runs with less noise-with a common mode rejection ratio (CMRR) that is better than 60 dB in the 50 Hz to 15 kHz range.
This version features a belt clip for added convenience in mobile situations. The belt clip can be removed for direct camera connections if desired.
DPA Microphones CM1618B00 Miniature Microdot Extension Cable (5.9 , Black)
The black 5.9 Miniature Microdot Extension Cable from DPA Microphones features a Microdot connector on one end and a Microdot connector on the other. It can be used to extend the distance of a headset or instrument microphone in audio applications, such as for broadcast TV, theater actors, public speakers, houses of worship, and more. In addition, the cable is 1.6mm in diameter.
DPA Microphones GC4099 Guitar Mounting Clip for 4099 Microphone
The DPA GC4099 Guitar Mounting Clip is designed to mount the DPA 4099 onto guitars and dobros.
DPA Microphones Mounting Clip for DPA 4099C Clip Microphone for Cello
The DPA Microphones Mounting Clip is designed to fit a DPA 4099C Clip Microphone for Cello. It is interchangeable with other DPA 4099 series instrument microphones. The clip holds the mic to the instrument.
Interchangeable clip
Compatible with DPA Microphones 4099 series instrument microphones
DPA Microphones PC4099 Magnet Mount
The PC4099 Magnet Mount from DPA Microphones is a spare or replacement magnetic mount for DPA 4099P stereo microphone system. It is identical to the magnetic mounts that come with the original package, and can be used with various instruments with magnetic surfaces. The mount provides a secure placement on a piano sound board.
Spare or replacement magnetic mount for the DPA 4099P stereo microphone system
Provides secure placement on a piano sound board
DPA Microphones BC4099 Instrument Mic Mounting Clip for Double Bass
Mic your double bass with the BC4099 Instrument Mic Mounting Clip from DPA Microphones. Designed to fit a DPA d:vote 4099 Microphone for double bass, this mounting clip attaches to the E and G strings of your instrument between the tailpiece and the bridge, enabling you to place the gooseneck mic in a variety of positions including the sweet spot between the bridge and fingerboard. The mount can be easily unclipped and moved from one instrument to another without blemishing the instruments finish.
Interchangeable clip
Compatible with DPA d:vote 4099 series instrument microphones
DPA Microphones Core 4099 Instrument Microphone (Loud SPL) Specs
Microphone
| Form Factor | Gooseneck |
| Operating Principle | Pressure Gradient |
| Capsule | Electret Condenser |
| Polar Pattern | Supercardioid |
Performance
| Frequency Range | 20 Hz to 20 kHz ±2 dB (at 7.9" / 20 cm) |
| Maximum SPL | 142 dB SPL |
| Impedance | 35 Ohms ± 14% |
| Sensitivity | 6 mV/Pa -44 dBV/Pa |
| Dynamic Range | 108 dB |
| Signal-to-Noise Ratio | 71 dB A-Weighted (1 kHz, at 1 Pa/94 dB SPL) |
| Equivalent Noise Level | 23 dB A-Weighted (20 μPa, Typical) 26 dB A-Weighted (20 μPa, Max) |
| THD | < 1% |
| CMRR | 60 dB |
Connectivity
| Analog Output | 1 x Microdot |
Power
| Operating Voltage | 5 to 50 V |
| Operating Current Consumption | 1.5 mA |
Physical
| Operating Temperature | -40 to 113°F / -40 to 45°C |
| Operating Humidity | 0 to 90% |
| Dimensions | ¸: 0.21 x L: 1.8" / ¸: 5.4 x L: 45 mm (Microphone) L: 5.5" / L: 140 mm (Gooseneck) |
| Weight | 0.95 oz / 27 g |
Packaging Info
| Package Weight | 0.105 lb |
| Box Dimensions (LxWxH) | 9.7 x 5.15 x 1" |
DPA Microphones VC4099 Violin Mounting Clip for 4099 Microphone Specs
Packaging Info
| Package Weight | 0.095 lb |
| Box Dimensions (LxWxH) | 5.05 x 4.55 x 1.7" |
DPA Microphones DAD6001 Microdot to 3-Pin XLR Adapter with Belt Clip Specs
Interface
| Connector 1 | 1 x Lockable Microdot Male |
| Connector 2 | 1 x Lockable XLR 3-Pin Male |
General
| Environmental Protection | None |
Packaging Info
| Package Weight | 0.16 lb |
| Box Dimensions (LxWxH) | 4.3 x 2.8 x 1" |
DPA Microphones CM1618B00 Miniature Microdot Extension Cable (5.9`, Black) Specs
| Connector 1 | Microdot |
| Connector 2 | Microdot |
| Length | 5.9` (1.8 m) |
| Cable Diameter | 0.063" (1.6 mm) |
| Weight | Not specified by manufacturer |
Packaging Info
| Package Weight | 0.05 lb |
| Box Dimensions (LxWxH) | 3 x 3 x 0.1" |
DPA Microphones GC4099 Guitar Mounting Clip for 4099 Microphone Specs
Packaging Info
| Package Weight | 0.09 lb |
| Box Dimensions (LxWxH) | 5.05 x 4.55 x 1.65" |
DPA Microphones Mounting Clip for DPA 4099C Clip Microphone for Cello Specs
Packaging Info
| Package Weight | 0.1 lb |
| Box Dimensions (LxWxH) | 4.3 x 2.9 x 1.1" |
DPA Microphones PC4099 Magnet Mount Specs
Packaging Info
| Package Weight | 0.1 lb |
| Box Dimensions (LxWxH) | 1.6 x 1 x 1" |
DPA Microphones BC4099 Instrument Mic Mounting Clip for Double Bass Specs
General
| Compatibility | d:vote 4099 Microphone |
| Dimensions | Not Specified by Manufacturer |
| Weight | Not Specified by Manufacturer |
Packaging Info
| Package Weight | 0.11 lb |
| Box Dimensions (LxWxH) | 5.05 x 4.5 x 1.65" |
In the Box
- 2-Year Manufacturer Warranty
No posts found
