DPA Microphones STC4099 Saxophone Mounting Clip for 4099 Microphone
The DPA STC4099 Saxophone Mounting Clip is designed to mount the DPA 4099 onto saxophones, trumpets, clarinets, etc.
DPA Microphones UC4099 Universal Clip
The UC4099 Universal Clip from DPA Microphones is a spare or replacement mounting system for a DPA 4099U universal clip microphone it s identical to the original clip that comes with the mic system. The hook-and-loop fastener strap affords wide-ranging compatibility -- it allows the holder to fit instruments like an oboe, clarinet, bassoon, recorder and flute, and more.
The hook-and-loop fastener band pulls tight to fit the circumference of the instrument. In the case of instruments with a large diameter, additional fastener straps are available separately to extend the capacity of the clip.
Spare or replacement clip for the DPA 4099U universal clip microphone
Fits instruments with various sizes and diameters
Hook-and-loop fastener band pulls tight to fit the circumference of the instrument
Additional hook-and-loop fastener straps are available to extend the clip s capacity
DPA Microphones Core 4099 Instrument Microphone (Extreme SPL) Specs
Microphone
| Form Factor | Gooseneck |
| Operating Principle | Pressure Gradient |
| Capsule | Electret Condenser |
| Polar Pattern | Supercardioid |
Performance
| Frequency Range | 20 Hz to 20 kHz ±2 dB (at 7.9" / 20 cm) |
| Maximum SPL | 152 dB SPL |
| Impedance | 35 Ohms ± 14% |
| Sensitivity | 2 mV/Pa -54 dBV/Pa |
| Dynamic Range | 109 dB |
| Signal-to-Noise Ratio | 66 dB A-Weighted (1 kHz, at 1 Pa/94 dB SPL) |
| Equivalent Noise Level | 28 dB A-Weighted (20 ¼Pa, Typical) 31 dB A-Weighted (20 ¼Pa, Max) |
| THD | < 1% |
| CMRR | 60 dB |
Connectivity
| Analog Output | 1 x Microdot |
Power
| Operating Voltage | 5 to 50 V |
| Operating Current Consumption | 1.5 mA |
Physical
| Operating Temperature | -40 to 113°F / -40 to 45°C |
| Operating Humidity | 0 to 90% |
| Dimensions | : 0.21 x L: 1.8" / : 5.4 x L: 45 mm (Microphone) L: 5.5" / L: 140 mm (Gooseneck) |
| Weight | 0.95 oz / 27 g |
Packaging Info
| Package Weight | 0.09 lb |
| Box Dimensions (LxWxH) | 9.6 x 5.25 x 0.95" |
DPA Microphones DAD6001 Microdot to 3-Pin XLR Adapter with Belt Clip Specs
Interface
| Connector 1 | 1 x Lockable Microdot Male |
| Connector 2 | 1 x Lockable XLR 3-Pin Male |
General
| Environmental Protection | None |
Packaging Info
| Package Weight | 0.16 lb |
| Box Dimensions (LxWxH) | 4.3 x 2.8 x 1" |
DPA Microphones CM2218B00 Heavy Duty Miniature Microdot Extension Cable (5.9`, Black) Specs
General
| Connector 1 | Microdot |
| Connector 2 | Microdot |
| Length | 5.9` (1.8 m) |
| Cable Diameter | 0.087" (2.2 mm) |
| Weight | Not specified by manufacturer |
Packaging Info
| Package Weight | 0.035 lb |
| Box Dimensions (LxWxH) | 3.95 x 3.65 x 0.45" |
DPA Microphones DC4099 Mounting Clip for Drum Rims Specs
Packaging Info
| Package Weight | 0.11 lb |
| Box Dimensions (LxWxH) | 4.3 x 2.8 x 1" |
DPA Microphones CM4099 - Clamp Mount for 4099 Instrument Microphone Specs
Packaging Info
| Package Weight | 0.115 lb |
| Box Dimensions (LxWxH) | 4.35 x 2.75 x 1" |
DPA Microphones STC4099 Saxophone Mounting Clip for 4099 Microphone Specs
Packaging Info
| Package Weight | 0.095 lb |
| Box Dimensions (LxWxH) | 4.3 x 2.75 x 1" |
DPA Microphones UC4099 Universal Clip Specs
Packaging Info
| Package Weight | 0.1 lb |
| Box Dimensions (LxWxH) | 5.05 x 4.55 x 1.65" |
In the Box
- 2-Year Manufacturer Warranty
No posts found
