The extreme SPL Core 4099 Instrument Microphone from DPA is a supercardioid microphone with a 5.5 gooseneck that is designed to capture audio in a variety of applications: from piano to guitar, strings to woodwinds, or brass to percussion instruments. You can move the mic to another instrument by using the designated clip (sold separately) to mount it correctly. The Core amplifier technology offers an increased performance and natural sound across the entire dynamic range. Furthermore, the supercardioid polar pattern allows the microphone to reject unwanted noise and accurately capture the true voice of your acoustic instrument. The Core 4099 requires a cable and adapter (sold separately).
Core by DPA technology inside
Supercardioid condenser microphone
Handles high SPLs
Superior gain-before-feedback
Flexible and easy mounting with a wide variety of instrument clips (available separately)
Gentle and easy to mount on the instrument
Versatile 5.5 gooseneck
DPA Microphones DAD6001 Microdot to 3-Pin XLR Adapter with Belt Clip
The DPA DAD6001 is an adapter featuring XLR and Microdot connections allowing you to attach a miniature DPA microphone to a preamp, mixer, camera, or similar device able to supply phantom power.
The adapter is functional at 12V, but requires 48V for the connected mic to reach full specifications. The active-signal balanced wiring allows for longer cable runs with less noise-with a common mode rejection ratio (CMRR) that is better than 60 dB in the 50 Hz to 15 kHz range.
This version features a belt clip for added convenience in mobile situations. The belt clip can be removed for direct camera connections if desired.
DPA Microphones CM2218B00 Heavy Duty Miniature Microdot Extension Cable (5.9 , Black)
The black 5.9 Heavy Duty Miniature Microdot Extension Cable from DPA Microphones features a Microdot connector on one end and a Microdot connector on the other. It can be used to extend the distance of a headset or instrument microphone in audio applications, such as for broadcast TV, theater actors, public speakers, houses of worship, and more. In addition, the cable is 2.2mm in diameter.
DPA Microphones DC4099 Mounting Clip for Drum Rims
The DC4099 Mounting Clip from DPA Microphones is a spare or replacement clip that allows you to attach a DPA Microphones 4099D clip microphone to drums or various percussion instruments. It is identical to the clip that comes with the original package. The drum clip itself features a versatile mounting system that allows for several mic positions.
Allows you to attach a DPA Microphones 4099D clip microphone on drums or various percussion instruments
Perfect for use as a spare or replacement accessory
Features a versatile 90° & system detaching the clip and reattaching it turned 90 degrees doubles the number of mic positions
DPA Microphones CM4099 - Clamp Mount for 4099 Instrument Microphone
The DPA CM4099 clamp mount lets you easily clip your 4099 microphone on saxophones, brass instruments, and a variety of other instruments. The clamp s flexible design supports a wide array of mounting and positioning options, and it allows for quickly moving the mic between instruments with just one hand, without scratching the finish.
- For 4099 instrument microphone
- For saxophones, brass instruments
- Fits many types of instruments
- Wide variety of mounting and positioning options
- Flexible design, easy one-hand mounting
- Quickly move mic between instruments
- Does not scratch instrument finish
DPA Microphones STC4099 Saxophone Mounting Clip for 4099 Microphone
The DPA STC4099 Saxophone Mounting Clip is designed to mount the DPA 4099 onto saxophones, trumpets, clarinets, etc.
DPA Microphones UC4099 Universal Clip
The UC4099 Universal Clip from DPA Microphones is a spare or replacement mounting system for a DPA 4099U universal clip microphone it s identical to the original clip that comes with the mic system. The hook-and-loop fastener strap affords wide-ranging compatibility -- it allows the holder to fit instruments like an oboe, clarinet, bassoon, recorder and flute, and more.
The hook-and-loop fastener band pulls tight to fit the circumference of the instrument. In the case of instruments with a large diameter, additional fastener straps are available separately to extend the capacity of the clip.
Spare or replacement clip for the DPA 4099U universal clip microphone
Fits instruments with various sizes and diameters
Hook-and-loop fastener band pulls tight to fit the circumference of the instrument
Additional hook-and-loop fastener straps are available to extend the clip s capacity
DPA Microphones Core 4099 Instrument Microphone (Extreme SPL) Specs
Microphone
| Form Factor | Gooseneck |
| Operating Principle | Pressure Gradient |
| Capsule | Electret Condenser |
| Polar Pattern | Supercardioid |
Performance
| Frequency Range | 20 Hz to 20 kHz ±2 dB (at 7.9" / 20 cm) |
| Maximum SPL | 152 dB SPL |
| Impedance | 35 Ohms ± 14% |
| Sensitivity | 2 mV/Pa -54 dBV/Pa |
| Dynamic Range | 109 dB |
| Signal-to-Noise Ratio | 66 dB A-Weighted (1 kHz, at 1 Pa/94 dB SPL) |
| Equivalent Noise Level | 28 dB A-Weighted (20 μPa, Typical) 31 dB A-Weighted (20 μPa, Max) |
| THD | < 1% |
| CMRR | 60 dB |
Connectivity
| Analog Output | 1 x Microdot |
Power
| Operating Voltage | 5 to 50 V |
| Operating Current Consumption | 1.5 mA |
Physical
| Operating Temperature | -40 to 113°F / -40 to 45°C |
| Operating Humidity | 0 to 90% |
| Dimensions | ¸: 0.21 x L: 1.8" / ¸: 5.4 x L: 45 mm (Microphone) L: 5.5" / L: 140 mm (Gooseneck) |
| Weight | 0.95 oz / 27 g |
Packaging Info
| Package Weight | 0.09 lb |
| Box Dimensions (LxWxH) | 9.6 x 5.25 x 0.95" |
DPA Microphones DAD6001 Microdot to 3-Pin XLR Adapter with Belt Clip Specs
Interface
| Connector 1 | 1 x Lockable Microdot Male |
| Connector 2 | 1 x Lockable XLR 3-Pin Male |
General
| Environmental Protection | None |
Packaging Info
| Package Weight | 0.16 lb |
| Box Dimensions (LxWxH) | 4.3 x 2.8 x 1" |
DPA Microphones CM2218B00 Heavy Duty Miniature Microdot Extension Cable (5.9`, Black) Specs
General
| Connector 1 | Microdot |
| Connector 2 | Microdot |
| Length | 5.9` (1.8 m) |
| Cable Diameter | 0.087" (2.2 mm) |
| Weight | Not specified by manufacturer |
Packaging Info
| Package Weight | 0.035 lb |
| Box Dimensions (LxWxH) | 3.95 x 3.65 x 0.45" |
DPA Microphones DC4099 Mounting Clip for Drum Rims Specs
Packaging Info
| Package Weight | 0.11 lb |
| Box Dimensions (LxWxH) | 4.3 x 2.8 x 1" |
DPA Microphones CM4099 - Clamp Mount for 4099 Instrument Microphone Specs
Packaging Info
| Package Weight | 0.115 lb |
| Box Dimensions (LxWxH) | 4.35 x 2.75 x 1" |
DPA Microphones STC4099 Saxophone Mounting Clip for 4099 Microphone Specs
Packaging Info
| Package Weight | 0.095 lb |
| Box Dimensions (LxWxH) | 4.3 x 2.75 x 1" |
DPA Microphones UC4099 Universal Clip Specs
Packaging Info
| Package Weight | 0.1 lb |
| Box Dimensions (LxWxH) | 5.05 x 4.55 x 1.65" |
In the Box
- 2-Year Manufacturer Warranty
No posts found
