Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Shure Beta 91ABoundary Microphone
EAN: 042406187176
The Shure Beta 91Ais a boundary microphone that can double as a kick drum mic, as it can capture the punch and attack of low-frequency instruments such as kick (bass) drums. It features a wide frequency response well suited for capturing a variety of audio signals such as organ and piano. The flat, boundary design also aides in producing a strong, solid low-end response, as well as make it easy to mount inside of a bass drum. The Beta 91Ais ideal for both recording and sound reinforcement alike.
Uniform half-cardioid polar pattern for maximum gain-before-feedback and rejection of off-axis sound
Low-profile design features integrated preamplifier and XLR connector to facilitate setup efficiency while minimizing stage clutter
Frequency response tailored for kick drum/low frequency applications with a wide dynamic range for use in high SPL environments
Two-position contour switch to maximize attack and clarity depending on application: select the flat response setting for natural sound in most applications or the Low-Mid Scoop setting for a strong low frequency punch with plenty of higher frequency attack
Furnished with zipper pouch
EAN: 042406187176
The Shure Beta 91Ais a boundary microphone that can double as a kick drum mic, as it can capture the punch and attack of low-frequency instruments such as kick (bass) drums. It features a wide frequency response well suited for capturing a variety of audio signals such as organ and piano. The flat, boundary design also aides in producing a strong, solid low-end response, as well as make it easy to mount inside of a bass drum. The Beta 91Ais ideal for both recording and sound reinforcement alike.
Uniform half-cardioid polar pattern for maximum gain-before-feedback and rejection of off-axis sound
Low-profile design features integrated preamplifier and XLR connector to facilitate setup efficiency while minimizing stage clutter
Frequency response tailored for kick drum/low frequency applications with a wide dynamic range for use in high SPL environments
Two-position contour switch to maximize attack and clarity depending on application: select the flat response setting for natural sound in most applications or the Low-Mid Scoop setting for a strong low frequency punch with plenty of higher frequency attack
Furnished with zipper pouch
Shure Beta 91A Specs
Microphone
| Capsule | Electret Condenser |
| Polar Pattern | Half-Cardioid |
| Tone Adjustment | Low Cut: -7 dB at 400 kHz |
| On-Board Controls | LF |
Performance
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 155 dB SPL (1 kHz, 1% THD, 1-Kilohm Load) 151 dB SPL (1 kHz, 1% THD, 2.5-Kilohm Load) |
| Impedance | 146 Ohms |
| Sensitivity | -48.5 dBV/Pa 3.8 mV/Pa |
| Dynamic Range | 125.5 dB |
| Signal-to-Noise Ratio | 64.5 dB |
| Equivalent Noise Level | 29.5 dB SPL A-Weighted (Typical) |
| CMRR | 55 dB |
Connectivity
| Analog Output | 1 x XLR 3-Pin |
Power
| Operating Voltage | 11 to 52 V (Phantom Power) |
| Operating Current Consumption | 5.4 mA |
Physical
| Dimensions | H: 3.7 x W: 0.8 x L: 5.5" / H: 95.1 x W: 20.3 x L: 139.1 mm |
| Weight | 16.6 oz / 470 g |
Packaging Info
| Package Weight | 1.85 lb |
| Box Dimensions (LxWxH) | 10 x 5 x 3.4" |
In the Box
- Shure Beta 91A Boundary Microphone
- Zippered Carrying Bag
- 2-Year Manufacturer Warranty
No posts found
