MILAB DC-96C Overview
The DC-96C from Milab offers musicians and engineers a workhorse microphone for studio vocals and instruments with a rubber-fitted large-diaphragm condenser element based on the legendary Milab 2900 rectangular capsule. The original DC-96 was released in the late 1960s. After an update, it was replaced by the DC-96B in 1983, which would become one of the most iconic Milab models. The DC-96C is the latest iteration, and now features transformerless circuitry for outstanding clarity and transparency while retaining the low-end warmth that made the DC-96B so sought after.
A side-address mic, the DC-96C offers a full frequency response from 20 Hz to 20 kHz and is suitable for use on a wide range of vocal and instrumental duties, including leads and backgrounds, acoustic guitar, piano, hi-hats, overheads, guitar amps, and more.
The cardioid pickup pattern helps to focus audio capture in front of the mic, helping to reduce bleed from other instruments and performers. Engage the -12 dB pad and the mic can handle loud sources up to 144 dB. The DC-96C features a gold-plated XLR connector and requires 48V phantom power for operation. A slip-on foam windscreen to reduce wind, breath, and plosive noises is included. A microphone clip is also supplied.
MILAB DC-96C Specs
Key Specs
| Form Factor | Stand/Boom Mount |
| Element Type | 1x Condenser |
| Polar Pattern | Cardioid |
| On-Board Controls | Pad |
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 132 dB SPL (1 kHz, 1% THD) 144 dB SPL (with Pad) |
| Analog Output | 1x XLR 3-Pin Male (Locking, on Mic) |
| Power Sources | Phantom Power |
Microphone
| Primary Applications | Live Sound, Studio Recording |
| Form Factor | Stand/Boom Mount |
| Intended Sound Sources | Vocals, Speech/Voice-Over |
| Sound Field | Mono |
| Element Type | 1x Condenser |
| Polar Pattern | Cardioid |
| Orientation | Side Address |
| Circuitry | Solid-State |
| Pad | -12 dB |
| High-Pass Filter | No |
| Tone Adjustment | No |
| Gain Adjustment | No |
| On-Board Controls | Pad |
Performance
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 132 dB SPL (1 kHz, 1% THD) 144 dB SPL (with Pad) |
| Impedance | 200 Ohms |
| Load Impedance | 1 Kilohms |
| Sensitivity | 21.5 mV/Pa |
| Equivalent Noise Level | 11 dB (Typical) 12 dB (Max) |
Connectivity
| Analog Output | 1x XLR 3-Pin Male (Locking, on Mic) |
Power
| Power Sources | Phantom Power |
| Operating Voltage | 48 V |
Physical
| Color | Black |
| Mounting Thread Size | 3/8"-16 Female (5/8"-27 Female with Included Adapter) |
| Environmental Protection | No |
| Dimensions | : 1.1 x L: 5.7" / : 27 x L: 145 mm |
| Weight | 0.5 lb / 220 g |
In the Box
- MILAB DC-96C Large-Diaphragm Cardioid Condenser Microphone
- 3127 Mic Clip
- 3403 Windscreen
- Lifetime Warranty
No posts found
